Microchip Technology

PIC16F722-E/MV - 8-Bit 20MHz Flash MCU | Microchip

MPN: PIC16F722-E/MV ✓ सक्रिय
1.8 V to 5.5 V Vdss 40-pin UQFN, 5 mm x 5 mm, 0.50 mm pitch Package 20 MHz Speed 3.5 KB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

PIC16F722-E/MV अवलोकन

The Microchip Technology PIC16F722-E/MV is an 8-bit PIC16 flash microcontroller with 3.5 KB of program memory, a 1.8 V to 5.5 V operating range, and a maximum clock speed of 20 MHz, housed in a 40-pin UQFN (MV) package. It combines a compact mixed-signal MCU platform with nanoWatt XLP low-power design characteristics for embedded control, sensor acquisition, and low-power monitoring systems.

An 8-bit flash microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, peripherals, and general-purpose I/O in one package. PIC16 devices use a compact instruction set and a hardware-based approach to embedded control, allowing a design to combine digital control functions with analog measurement without requiring a separate analog processor. The PIC16F722 belongs to the broader MCU and embedded-controller hierarchy.

Key features include 3.5 KB of flash program memory, operation from 1.8 V to 5.5 V, and a 20 MHz maximum instruction clock. The MV package provides 40 physical positions and a compact 5 mm by 5 mm land pattern with 0.50 mm pitch, according to the part-specific package listing. Its flash architecture permits in-system reprogramming and supports repeatable firmware updates when the application design includes the required programming and reset circuitry.

The PIC16F722 incorporates an internal low-dropout voltage regulator, and the manufacturer datasheet states that an external capacitor must be connected to an available VCAP pin to stabilize this regulator. This internal supply arrangement supports low-power operation and simplifies external power design, but the VCAP connection and its capacitor value must follow the datasheet requirements. The device also supports peripheral functions suited to embedded control, including general-purpose I/O, timers, serial interfaces, and analog conversion functions.

Typical uses include battery-powered environmental sensors, compact industrial controllers, data-acquisition modules, appliance control boards, and low-energy monitoring equipment. Its small UQFN package is especially useful when board area is limited and the design can accommodate fine-pitch assembly. The 20 MHz clock ceiling also provides sufficient timing margin for responsive control loops, interrupt-driven peripherals, and periodic sensor sampling.

A critical layout consideration is the 0.50 mm pitch UQFN footprint, which requires careful PCB trace planning, adequate solder-paste coverage, and inspection capable of resolving very small joints. Designers should also route VCAP directly to its recommended capacitor and follow the datasheet decoupling network. Firmware, programming, brownout behavior, and peripheral configuration should be validated together rather than treating the MCU solely as a general-purpose logic component.

This product overview combines the exact PIC16F722-E/MV ordering information, package characteristics, manufacturer application guidance, and drop-in replacement constraints into a practical engineering reference. It is intended to help designers evaluate memory, voltage, clock, footprint, programming, and lifecycle requirements before committing the MCU to an embedded-control design.

के लिए ड्रॉप-इन विकल्प PIC16F722-E/MV — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PIC16F722-E/MV (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, ADC, Internal Oscillator, Low-Power Technology, Architecture.

Microchip Technology
Package: 28-pin UQFN with exposed pad
ADC: 1 ADC
Low-Power Technology: nanoWatt XLP technology
Microchip Technology
Package: UQFN-28 (MV), 5x5 mm, 0.5 mm pitch
ADC: 12-bit, up to 11 channels
Internal Oscillator: 16 MHz factory-calibrated, 31 kHz LF oscillator
Microchip Technology
Package: 28-pin UQFN (4x4 mm) with exposed pad
ADC: 11 channels, 8-bit
Internal Oscillator: 16 MHz (calibrated)

PIC16F722A-E/MV

✅ ड्रॉप-इन
📦 40-pin UQFN (MV)
A-revision device with the same 3.5 KB flash, 1.8 V to 5.5 V supply range, 20 MHz class architecture, and MV footprint; electrical differences are 0 V and 0 MHz, while revision-specific errata require review

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PIC16F722A-I/MV

✅ ड्रॉप-इन
📦 40-pin UQFN (MV)
A-revision and I temperature grade with the same 3.5 KB flash, 1.8 V to 5.5 V supply range, 20 MHz class architecture, and MV footprint; the temperature-grade ceiling differs from the E grade

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PIC16F722-I/MV

✅ ड्रॉप-इन
Microchip Technology
📦 40-pin UQFN (MV)
8-bit RISC microcontroller · PIC16 · 3.5 KB Flash · 128 bytes · 1.8 V to 5.5 V · 1 ADC

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PIC16F723A-E/MV

✅ ड्रॉप-इन
Microchip Technology
📦 40-pin UQFN (MV)
8-bit PIC mid-range (RISC) · 7 KB Flash · 192 bytes · 128 bytes (256 bytes in some variants) · 20 MHz (200 ns instruction cycle) · 16 MHz factory-calibrated, 31 kHz LF oscillator · 1.8 V to 5.5 V · 25

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PIC16F723A-I/MV

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 40-pin UQFN (MV)
8-bit PIC16 RISC · 7 KB (4K x 14 words) · 192 bytes · 256 bytes · 20 MHz · 1.8 V to 5.5 V · 16 MHz (calibrated) · 25 (max)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PIC16F722-E/MV Maximum Ratings और Electrical Characteristics

Microcontroller Type 8-bit Flash PIC16 microcontroller
Program Memory 3.5 KB
Program Memory Organization 2K x 14 words
Operating Voltage Range 1.8 V to 5.5 V
Maximum Clock Speed 20 MHz
Internal Oscillator 16 MHz
General-Purpose I/O 36 I/O
पैकेज 40-pin UQFN, 5 mm x 5 mm, 0.50 mm pitch
माउंटिंग प्रकार Surface mount
Internal Voltage Regulator Low-dropout regulator with external VCAP stabilization capacitor
Technology nanoWatt XLP
Lead-Free Packaging Lead-free

PIC16F722-E/MV 40-pin uqfn, 5 mm x 5 mm, 0.50 mm pitch पिन कॉन्फ़िगरेशन गाइड

PIC16F722-E/MV (40-pin uqfn, 5 mm x 5 mm, 0.50 mm pitch पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

PIC16F722-E/MV के लिए 40-pin uqfn, 5 mm x 5 mm, 0.50 mm pitch पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PIC16F722-E/MV.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

PIC16F722-E/MV के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Environmental Sensors, Low-Power Data-Acquisition Module, Industrial Control Board, Smart Appliance Controller, LED Lighting Controller, Battery Management and Monitoring.

🧩

Battery-Powered Environmental Sensors

The PIC16F722-E/MV fits compact environmental sensors because its 1.8 V to 5.5 V operating range supports energy-conscious sensing nodes, while 3.5 KB of flash provides space for acquisition, filtering, threshold logic, and communications firmware. The 20 MHz maximum clock supports responsive sampling and interrupt-driven peripheral operation without increasing the required logic complexity. Its 40-pin UQFN package, measuring 5 mm by 5 mm, also allows the controller to coexist with a sensor, radio, and power-management circuitry on a small board. The design must include the datasheet-specified VCAP capacitor and should use low-power modes, peripheral interrupts, and batched sensor reads to reduce energy use between readings.

📊

Low-Power Data-Acquisition Module

The PIC16F722-E/MV is suitable for a compact data-acquisition module that combines sensor inputs with local control. Its 36 general-purpose I/O lines provide connections for digital sensors, interrupt inputs, status indicators, and actuator-control signals, while the 20 MHz clock ceiling gives adequate timing margin for sampling and control loops. With 3.5 KB of program memory, firmware can combine acquisition sequencing, scaling, thresholding, diagnostics, and a compact communications routine. A 1.8 V minimum operating voltage supports low-voltage sensor nodes where every milliamp of quiescent demand matters. Board-level validation should include analog noise, input thresholds, VCAP stability, and the synchronization of acquisition timing across connected sensors.

🏭

Industrial Control Board

The PIC16F722-E/MV can serve as the central controller on a small industrial interface board that handles discrete inputs, relay or valve outputs, status feedback, and local diagnostics. The 8-bit architecture is suitable for deterministic supervisory control, and the 20 MHz maximum clock supports responsive interrupt handling without requiring a high-complexity processor. Operating from 1.8 V to 5.5 V allows the MCU to sit beside modern low-voltage sensor and communications circuits, while the compact UQFN package reduces board-space requirements. The design should use the pin-description tables to map every signal because alternate peripheral functions can differ among PIC16F72x family members. ESD protection, isolation boundaries, grounding, and output-driver sizing remain board-level responsibilities rather than functions of the microcontroller.

🔧

Smart Appliance Controller

The PIC16F722-E/MV is appropriate for appliance control functions such as user-input decoding, motor sequencing, temperature monitoring, and fault management. Its 3.5 KB flash capacity is well suited to compact control firmware, and the 36 I/O lines offer flexible connectivity for switches, sensors, displays, and driver-control signals. The 1.8 V to 5.5 V range permits operation across multiple internal rail choices, while the 20 MHz maximum clock allows deterministic task execution for safety-related interlocks. Because the UQFN footprint uses 0.50 mm pitch, the PCB and assembly process must support fine-pitch soldering and inspection. Firmware validation should include brownout behavior, reset states, watchdog operation, and worst-case timing for motor and heater interlocks.

💡

LED Lighting Controller

The PIC16F722-E/MV can coordinate LED lighting systems where the controller handles button inputs, status LEDs, timed effects, and communication with an external driver. Its 20 MHz clock ceiling supports responsive updates and timer-based sequencing, while 3.5 KB of flash provides room for a user interface, lighting patterns, diagnostics, and fault recovery. The wide 1.8 V to 5.5 V supply range gives flexibility in battery, USB, and externally regulated designs, although the selected LED driver determines the final power architecture. The MCU should not drive high LED current directly unless its output limits and thermal conditions permit it; use a suitable constant-current driver and keep switching-current paths away from sensitive analog traces. Firmware checks should include open-LED, shorted-channel, and thermal-fault behavior.

⚡

Battery Management and Monitoring

The PIC16F722-E/MV is well matched to battery-powered monitoring equipment because it can operate down to 1.8 V and includes flash for local threshold, filtering, and event-logging functions. The MCU can supervise a voltage, current, or temperature sensor and operate alarms or sleep between measurements to extend battery life. Its 36 I/O lines allow several monitored channels and status signals to share a compact controller design, while the 20 MHz class provides ample timing margin for periodic conversions and communications. A reliable implementation requires careful ADC or sensor conditioning, reference stability, and calibration storage. Validate battery behavior across the full input-voltage range and include firmware checks for undervoltage conditions, sensor faults, and unexpected resets.

अनुशंसित उत्पादों का सारांश

PIC16F722A-E/MV Same-family revision candidate for firmware and board evaluation उपयोग में: Battery-Powered Environmental Sensors, Low-Power Data-Acquisition Module, Smart Appliance Controller, LED Lighting Controller PIC16F722-I/MV Microchip Technology उपयोग में: Battery-Powered Environmental Sensors, Battery Management and Monitoring PIC16F723A-E/MV Microchip Technology उपयोग में: Low-Power Data-Acquisition Module, LED Lighting Controller PIC16F722A-I/MV Same-family MV option for industrial temperature-grade evaluation उपयोग में: Industrial Control Board, Battery Management and Monitoring PIC16F723A-I/MV Microchip Technology उपयोग में: Industrial Control Board PIC16F722-E/MV Microchip Technology उपयोग में: Smart Appliance Controller
What is the PIC16F722-E/MV?
The PIC16F722-E/MV is a Microchip Technology 8-bit PIC16 flash microcontroller with 3.5 KB of program memory, a 1.8 V to 5.5 V operating range, and a maximum clock speed of 20 MHz. It is packaged in a 40-pin UQFN package measuring 5 mm by 5 mm with 0.50 mm pitch. According to the Microchip PIC16(L)F722/3/4/6/7 Data Sheet, the device also includes an internal low-dropout regulator requiring an external VCAP capacitor.
Where can I download the PIC16F722 datasheet PDF?
The official PIC16F722 datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/40001341F.pdf. The document covers the PIC16F722, PIC16F723, PIC16F724, PIC16F726, and PIC16F727 family and includes electrical characteristics, package information, and device-specific guidance. Use the manufacturer document when defining the VCAP network, programming connections, decoupling, and package footprint.
What is the operating voltage of PIC16F722-E/MV?
The PIC16F722-E/MV operates from 1.8 V to 5.5 V according to the Microchip product and distributor listings for this exact ordering code. This range supports low-voltage battery-powered designs as well as conventional 3.3 V and 5 V systems. The internal low-dropout regulator also requires an external capacitor on a VCAP pin, as specified in the manufacturer PIC16(L)F722/3/4/6/7 Data Sheet.
How much flash memory does PIC16F722-E/MV contain?
The PIC16F722-E/MV contains 3.5 KB of flash program memory, organized as 2K by 14 words. The exact figure appears in the Microchip family datasheet and the exact-part distributor listing. Flash memory supports field reprogramming when suitable programming, reset, and interface circuitry are included, although a complete firmware image must also fit within the available program-memory capacity.
What package and pin count are used by PIC16F722-E/MV?
The PIC16F722-E/MV uses a 40-pin UQFN package measuring 5 mm by 5 mm with a 0.50 mm pitch. The MV ordering code identifies the compact surface-mount package, while the part-specific technical listing identifies 40 package positions and 36 general-purpose I/O lines. Because the footprint has a fine pitch, PCB assembly and inspection processes must be capable of handling 0.50 mm lead spacing.
What is the maximum clock speed of PIC16F722-E/MV?
The maximum clock speed of the PIC16F722-E/MV is 20 MHz. A distributor listing for the exact part identifies a 16 MHz internal oscillator, while the family datasheet specifies operation up to 20 MHz. The selected clock source, fuse configuration, voltage, and peripheral timing must be evaluated together rather than assuming every operating mode supports the maximum frequency.
Can PIC16F722-E/MV operate at 3.3 V?
Yes, 3.3 V falls within the PIC16F722-E/MV operating range of 1.8 V to 5.5 V. The device can therefore be used in 3.3 V industrial, consumer, and sensor modules without changing the controller supply family. Confirm the external VCAP capacitor, decoupling network, I/O levels, and reset configuration in the circuit against the Microchip family datasheet.
Where can I buy PIC16F722-E/MV and check current availability?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and delivery schedule for PIC16F722-E/MV. The exact part is identified as active in part-specific technical information. A complete procurement response should also confirm the MV package, reel or tray format, and any date-code or traceability requirements needed for production.
What is the lead time for PIC16F722-E/MV?
The current lead time for PIC16F722-E/MV should be requested through the Request a Quote form on this page. Lead time can change with supplier inventory, package format, order quantity, and manufacturing schedules, so a production commitment should use the quote response rather than a generic estimate. Include the required order quantity and desired delivery date in the request.
Is PIC16F722-E/MV in stock?
Stock status for PIC16F722-E/MV should be confirmed through the Request a Quote form on this page. The manufacturer lists the PIC16F722 family as active, but active lifecycle status alone does not guarantee a specific package code is immediately available. Ask the supplier to confirm exact MPN, package, quantity, lot traceability, and the expected ship date.
What is the difference between PIC16F722-E/MV and PIC16F722A-E/MV?
The PIC16F722-E/MV and PIC16F722A-E/MV share the Microchip PIC16F722 identity, 3.5 KB flash class, 1.8 V to 5.5 V operating range, and MV package family. The A revision represents a later device revision, so firmware should be checked for revision-specific errata and qualification changes rather than assuming every internal detail is unchanged. Both are potential 40-pin drop-in options, subject to package and firmware verification.
When should I choose PIC16F722-E/MV over PIC16F722-I/MV?
Choose PIC16F722-E/MV when the design requires the E temperature-grade option and is qualified for its specified operating-temperature limits; choose PIC16F722-I/MV when the I grade is appropriate for the intended temperature range and qualification policy. Both use the MV package and retain the same core 3.5 KB flash and 20 MHz maximum clock positioning. The temperature-grade suffix must be checked against the final environmental requirements.
Is PIC16F723A-E/MV a drop-in replacement for PIC16F722-E/MV?
PIC16F723A-E/MV is a same-package candidate for PIC16F722-E/MV, but it is a different PIC16F72x family member and should not be treated as automatically interchangeable. The package designation is MV, while peripheral availability, memory details, pin functions, and firmware behavior can differ between PIC16F722 and PIC16F723A. Compare the Microchip pin and device tables before approving it as a drop-in replacement.
What can replace PIC16F722-E/MV on the same PCB?
PIC16F722A-E/MV, PIC16F722A-I/MV, PIC16F722-I/MV, PIC16F723A-E/MV, and PIC16F723A-I/MV are the closest same-brand MV-package candidates identified for PIC16F722-E/MV. A true drop-in decision requires matching land pattern, pin functions, voltage limits, timing, memory, peripherals, and qualification. Do not rely on package code alone, because a family member can use the same footprint while changing pin multiplexing or peripheral behavior.
What is the best cross-brand equivalent for PIC16F722-E/MV?
No cross-brand drop-in equivalent is established for the PIC16F722-E/MV in the available compatibility information. PIC16 firmware, pin multiplexing, oscillator configuration, and peripheral architecture are device-specific, so another manufacturer's MCU with similar flash memory or clock speed is not automatically pin-compatible. Use Microchip's cross-reference process and compare the exact 40-pin MV land pattern and every connected signal before considering a cross-brand substitution.
What are the key specifications of PIC16F722-E/MV that engineers should know?
The key PIC16F722-E/MV specifications are an 8-bit PIC16 architecture, 3.5 KB of flash memory organized as 2K by 14 words, a 1.8 V to 5.5 V supply range, a 20 MHz maximum clock speed, 36 general-purpose I/O lines, and a 40-pin 5 mm by 5 mm UQFN package with 0.50 mm pitch. The device also uses an internal low-dropout regulator that requires an external VCAP stabilization capacitor.

के लिए इंजीनियरिंग संदर्भ डेटा PIC16F722-E/MV — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Select PIC16F722-E/MV for a compact 8-bit embedded-control design that requires 3.5 KB of flash, a 1.8 V to 5.5 V supply range, 20 MHz maximum clock operation, and a 40-pin 5 mm by 5 mm UQFN footprint. Choose PIC16F722A-E/MV when a later A revision is preferred for maintenance or product updates, after checking revision errata and qualification requirements. Use PIC16F722-I/MV or PIC16F722A-I/MV when the I temperature grade better matches the product environment. PIC16F723A-E/MV and PIC16F723A-I/MV can support same-package redesign studies, but they belong to a different family member and require detailed review of memory, peripherals, pin multiplexing, and firmware behavior. No cross-brand part should be treated as a drop-in replacement without an independently verified land pattern and complete pin-level compatibility review.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद PIC16F722A-E/MV PIC16F722A-I/MV PIC16F722-I/MV PIC16F723A-E/MV PIC16F723A-I/MV
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 40-pin UQFN (MV), 5 mm x 5 mm 40-pin UQFN (MV) 40-pin UQFN (MV) 40-pin UQFN (MV) 40-pin UQFN (MV) 40-pin UQFN (MV)
Product Family PIC16F722 PIC16F722A PIC16F722A PIC16F722 PIC16F723A PIC16F723A
Device Revision Base PIC16F722 revision A revision A revision Base revision A revision A revision
Temperature Grade E grade E grade I grade I grade E grade I grade
Maximum Clock Speed 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Operating Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V
Internal Voltage Regulator Low-dropout regulator with external VCAP capacitor Low-dropout regulator with external VCAP capacitor Low-dropout regulator with external VCAP capacitor Low-dropout regulator with external VCAP capacitor Low-dropout regulator with external VCAP capacitor Low-dropout regulator with external VCAP capacitor

मुख्य विशेषताएँ

  • Direct base-family option when exact suffix interchangeability is preferred (बनामPIC16F722-I/MV)
  • Later revision option for product maintenance (बनामPIC16F722A-E/MV)
  • Same-package PIC16F72x expansion path (बनामPIC16F723A-E/MV)

डिज़ाइन नोट्स

The 40-pin MV package uses a 0.50 mm pitch in a 5 mm by 5 mm footprint. Assign the PCB land pattern from the manufacturer package drawing, confirm exposed-pad requirements, and design the assembly process for fine-pitch solder bridging risk. Keep analog and high-current switching paths away from MCU supply and sensing pins, and route VCAP as a short, quiet connection directly to its recommended stabilization capacitor.

Follow the Microchip PIC16(L)F722/3/4/6/7 Data Sheet for the VCAP capacitor, supply decoupling, brownout behavior, and power-up sequencing. The internal low-dropout regulator is not a substitute for proper board-level bypassing. Place the specified input and output capacitors close to their pins, provide a low-impedance ground return, and verify operation across the intended 1.8 V to 5.5 V supply range.

Do not approve a replacement solely because its ordering code ends in MV. Compare every physical pin, alternate-function mapping, power pin, programming connection, oscillator option, peripheral feature, memory map, and interrupt vector with the original design. The PIC16F723A family can share the package family while differing in device-specific behavior, so use the manufacturer pin and cross-reference tables before releasing a substitution to production.

Separate clock, programming, and switching paths from sensitive measurement inputs. Use a continuous ground reference where practical, place bulk and ceramic decoupling according to the reference circuit, and keep antenna-like traces short. If the device controls relays, motors, or LED drivers, route high-current paths directly between the driver and load rather than through the MCU area, and account for ground bounce when setting input thresholds.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Yes
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The exact-part package information identifies the MV package as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.

डेटा सत्यापन तिथि: 2026-11-19 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

pic16f722 datasheet pic16f722 datasheet pdf PIC16F722-E/MV specifications PIC16F722-E/MV pinout PIC16F722-E/MV UQFN footprint PIC16F722-E/MV replacement PIC16F722-E/MV equivalent PIC16F722-E/MV cross reference PIC16F722-E/MV vs PIC16F722A-E/MV PIC16F722-E/MV price PIC16F722-E/MV stock Microchip PIC16F722-E/MV

संबंधित कंपोनेंट्स और शब्द

Microchip Technology PIC16F722-E/MV PIC16F722A-E/MV PIC16F722A-I/MV PIC16F722-I/MV PIC16F723A-E/MV PIC16F723A-I/MV PIC16 8-bit microcontroller flash microcontroller embedded controller MCU nanoWatt XLP 1.8 V to 5.5 V 20 MHz 3.5 KB flash memory internal low-dropout regulator VCAP capacitor 40-pin UQFN MV package QFN package family surface-mount package 0.50 mm pitch battery-powered embedded control
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें