PIC24HJ32GP302-E/MM - 16-Bit 40 MIPS Flash MCU | Microchip
MPN: PIC24HJ32GP302-E/MM ✓ چالاکPIC24HJ32GP302-E/MM گشتی
A high-performance microcontroller is a semiconductor that executes firmware and manages sensors, actuators, communications, and control loops in an embedded system. The PIC24H architecture combines a 16-bit instruction set with high-speed digital signal processing characteristics and is designed for applications involving repetitive calculations, motor control, power conversion, and industrial automation. PIC24H devices are also identified as pin compatible with compatible dsPIC33F family devices, allowing controlled reuse of board layouts when electrical and peripheral requirements match.
The PIC24HJ32GP302 combines a 40 MHz operating speed with 32 KB of Flash memory and up to 2 KB of SRAM. Its reported peripheral configuration includes three 16-bit timers or counters, with two timer pairs capable of forming 32-bit timers, plus two output-capture channels. These resources support time-based control, pulse measurement, frequency measurement, and periodic actuator drive without requiring a separate timing device.
The 21-I/O device provides 21 general-purpose I/O ports for digital interfaces and control signals. Its advanced analog capabilities make it suitable for systems that mix digital processing with measured analog inputs and controlled analog outputs. The 28-QFN-S surface-mount package supports compact, high-density PCB layouts, while the exposed thermal pad provides a practical path for heat transfer when the operating frequency and peripheral load are sustained.
Typical applications include industrial motor controllers, digital power converters, factory automation modules, medical instrumentation, audio and communications control, and general embedded control platforms. For these uses, the 40 MIPS processing rate allows timely execution of control algorithms, while the integrated timers reduce external component requirements.
PCB design should preserve the manufacturer's recommended decoupling and exposed-pad layout, connect all supply pins correctly, and route high-current returns away from sensitive analog inputs. Firmware and peripheral configuration must also be checked against the manufacturer pin-description and device-selection tables before assigning each pin to a final board function.
This product overview consolidates the key electrical, memory, timing, packaging, and application characteristics of the PIC24HJ32GP302-E/MM and provides practical guidance for evaluating the device, planning the PCB, and requesting a quotation for the exact ordered part.
جێگرەوەکانی جێگۆڕکێ بۆ PIC24HJ32GP302-E/MM — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC24HJ32GP302-E/MM (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Program Memory, Timer/Counter Count.
PIC24HJ32GP302-I/MM
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC24HJ32GP302-E/ML
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC24HJ32GP302-I/ML
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC24HJ32GP304-E/MM
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC24HJ32GP304-I/MM
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC24HJ32GP302-E/MM زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 16-bit high-performance Flash microcontroller |
| Architecture | PIC24H 16-bit architecture |
| Maximum CPU Speed | 40 MHz |
| Instruction Throughput | 40 MIPS |
| Program Memory | 32 KB Flash |
| Program Memory Organization | 11K x 24 words |
| SRAM | Up to 2 KB |
| Supply Voltage Range | 3.0 V to 3.6 V |
| General-Purpose I/O Ports | 21 |
| Timer/Counter Count | 3 timers/counters |
| Timer Configuration | Two pairs can form one 32-bit timer |
| Output Capture Channels | 2 |
| پاکێج | 28-QFN-S (6 x 6 mm) |
| جۆری دامەزراندن | Surface mount |
| Shipping Format | Tube |
| Lead-Free Status | Lead-free |
| Lifecycle Stage | Active |
ڕێنمایی ڕێکخستنی پینی PIC24HJ32GP302-E/MM 28-qfn-s (6 x 6 mm)
ڕێکخستنی پین بۆ PIC24HJ32GP302-E/MM (پاکێجی 28-qfn-s (6 x 6 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC24HJ32GP302-E/MM.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC24HJ32GP302-E/MM گونجاوە بۆ 6 بەکارھێنانs: Industrial Motor Control, Digital Power Conversion, Factory Automation Controller, Medical Instrumentation, Communications Control Module, Audio Processing Controller.
Industrial Motor Control
The PIC24HJ32GP302-E/MM fits real-time motor-control tasks because its 40 MIPS processing capability provides ample computation for duty-cycle calculation, current-command processing, and state-machine control. The three 16-bit timers can support PWM generation, input capture, or periodic control functions, while two timer pairs can be combined into a 32-bit timer for extended timing intervals. Its 21 I/O ports leave room for encoders, gate drivers, fault signals, and digital interlocks. The device operates from 3.0 V to 3.6 V, matching 3.3 V industrial controller architectures. Place input and output decoupling near the package, connect the exposed pad to the recommended thermal and ground structure, and preserve isolation spacing where the motor stage introduces high dV/dt events.
پێشنیارکراو
Digital Power Conversion
The PIC24HJ32GP302-E/MM is suitable for digital power converters where fast control-loop execution is needed to regulate an analog power stage. At 40 MIPS, the MCU can execute compensation and current-mode control routines while timers provide deterministic switching-frequency and dead-time-related functions. Its 32 KB Flash provides room for control code, fault handling, configuration data, and communication routines, while 21 I/O ports can support pulse-width-modulated commands, comparator outputs, current-sense signals, and supervisory functions. The 3.0 V to 3.6 V supply range suits a 3.3 V control domain. Keep high-current switching loops compact, route analog sense signals away from gate-drive traces, and use the manufacturer layout recommendations to minimize coupling into the controller.
پێشنیارکراو
Factory Automation Controller
The PIC24HJ32GP302-E/MM can serve as the central controller in a compact factory automation module because it combines a 40 MIPS control processor with 21 I/O ports and multiple timing peripherals. Firmware can coordinate sensor acquisition, actuator sequencing, interlocks, diagnostics, and a local communications interface within a 32 KB Flash budget. Two output-capture channels are useful for measuring pulse or timing inputs, and the three timers can support periodic tasks, input capture, or PWM outputs. The 28-QFN-S 6 x 6 mm package helps reduce board area in distributed control boxes. Design the PCB with a stable 3.3 V supply, protected I/O paths, direct copper access to the exposed pad, and separate analog and digital grounding strategies where the module includes sensitive measurement circuitry.
پێشنیارکراو
Medical Instrumentation
The PIC24HJ32GP302-E/MM is appropriate for compact medical-instrumentation modules that combine deterministic sampling control, local signal processing, and user or communications interfaces. The 40 MIPS execution rate allows the controller to process acquired measurements and execute control algorithms while maintaining predictable timing through its hardware timers. With 32 KB Flash and up to 2 KB SRAM, it suits focused embedded firmware rather than large data-storage applications. The 21 I/O ports can connect sensors, indicators, and communication transceivers, and the 3.0 V to 3.6 V operating range supports 3.3 V system rails. Medical-system designs must separately determine applicable electrical-safety, isolation, leakage-current, and electromagnetic-compatibility requirements; the MCU qualification alone does not establish compliance for the finished instrument.
پێشنیارکراو
Communications Control Module
The PIC24HJ32GP302-E/MM can be used as the host controller for a communications-oriented embedded module where fast protocol processing and deterministic timing are needed. Its 40 MIPS rate provides headroom for framing, buffering, error handling, and supervisory logic, while three timers support baud-rate generation, timeout management, or periodic synchronization. The 21 available I/O ports can support a serial interface, status indicators, configuration pins, and handshake signals. The 32 KB Flash limit requires careful code budgeting for large protocol stacks, but it remains practical for focused gateways or peripheral controllers. Keep interface routing away from analog timing circuits, follow the exposed-pad land pattern, and validate timing margin with the specific transceiver or network device used in the final design.
پێشنیارکراو
Audio Processing Controller
The PIC24HJ32GP302-E/MM can support audio control and signal-processing tasks where repeated calculations and multiple timers are more important than large storage capacity. Its 40 MIPS throughput can implement control loops, mixing logic, metering, and communication tasks, while three timers can generate sample-related timing or measure external pulse intervals. The 21 I/O ports provide access to audio-control signals, indicators, and serial configuration interfaces. The compact 28-QFN-S package helps fit the controller into a space-constrained audio module, although the target's 32 KB Flash and up to 2 KB SRAM require disciplined buffer management. Follow the manufacturer decoupling and grounding guidance, isolate high-level audio routing from sensitive digital timing, and verify thermal performance with the exposed pad connected to the recommended PCB copper structure.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC24HJ32GP302-E/MM — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC24HJ32GP302-I/MM | PIC24HJ32GP302-E/ML | PIC24HJ32GP302-I/ML | PIC24HJ32GP304-E/MM | PIC24HJ32GP304-I/MM |
|---|---|---|---|---|---|---|
| Package | 28-QFN-S (6 x 6 mm) | 28-QFN-S (6 x 6 mm) | 28-QFN-S (6 x 6 mm) | 28-QFN-S (6 x 6 mm) | 28-QFN-S (6 x 6 mm) | 28-QFN-S (6 x 6 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Instruction Throughput | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Architecture | PIC24H 16-bit | PIC24H 16-bit | PIC24H 16-bit | PIC24H 16-bit | PIC24H 16-bit | PIC24H 16-bit |
جیاکەرەوە سەرەکییەکان
- Compact high-performance control in a 6 x 6 mm package (بەراورد بەPIC16LC622T-04E/SO)
- Higher processing throughput for real-time control (بەراورد بەPIC16LC622T-04E/SO)
- Integrated timing resources reduce external component count (بەراورد بەPIC16LC622T-04E/SO)
تێبینییەکانی دیزاین
Follow the manufacturer's 28-QFN-S recommended land pattern and exposed-pad connection instructions exactly. Place the required input and output decoupling capacitors close to their associated package terminals, keep the exposed pad thermally and electrically connected as directed, and avoid placing high-current return paths beneath sensitive analog inputs. The package's 6 x 6 mm footprint offers little routing area, so component placement and via placement should be planned together rather than added after schematic completion.
Design the 3.3 V supply rail to remain within the 3.0 V to 3.6 V operating range under startup, transient, and full-load conditions. Account separately for the digital core, analog resources, I/O current, and any external loads connected through the MCU pins. Use the manufacturer input-voltage and decoupling requirements as the basis for capacitor selection, and verify the power source does not generate excursions that compromise controller timing or peripheral accuracy.
Separate high-speed or high-current digital paths from analog inputs wherever the board permits. Route oscillator and reference signals away from switching nodes and noisy inductors, use a continuous ground reference under the device where recommended, and assign unused pins according to the datasheet rather than leaving their disposition to assumption. For mixed-signal boards, establish the analog return path at the converter and connect it to the quiet ground region near the MCU's analog supply and bypass capacitor.
Do not assume that every PIC24H or dsPIC33F device with a related family name is interchangeable. Confirm the exact package pin count, exposed-pad requirements, Flash size, SRAM size, peripheral availability, voltage range, timing grade, and programming configuration. The family-level statement about dsPIC33F pin compatibility is not a blanket substitution rule, so verify each proposed cross reference against the specific Microchip device-selection and pin tables before releasing production artwork.
زانیاری پابەندبوون
The listed part is described as lead-free. RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification details were not established by the retrieved product information.