Microchip Technology

PIC24HJ32GP302-E/MM - 16-Bit 40 MIPS Flash MCU | Microchip

MPN: PIC24HJ32GP302-E/MM ✓ Aktif
3.0 V to 3.6 V Vdss 28-QFN-S (6 x 6 mm) Package 40 MHz Speed 32 KB Flash Memory
MOQ: 1 |

PIC24HJ32GP302-E/MM Ringkasan

The Microchip Technology PIC24HJ32GP302-E/MM is a 16-bit PIC24H high-performance microcontroller operating at up to 40 MIPS, with 32 KB of Flash program memory and 21 I/O ports, housed in a 28-QFN-S package measuring 6 x 6 mm. The device operates from a 3.0 V to 3.6 V supply, making it appropriate for embedded control systems that require deterministic real-time performance, compact packaging, and integrated analog and digital resources.

A high-performance microcontroller is a semiconductor that executes firmware and manages sensors, actuators, communications, and control loops in an embedded system. The PIC24H architecture combines a 16-bit instruction set with high-speed digital signal processing characteristics and is designed for applications involving repetitive calculations, motor control, power conversion, and industrial automation. PIC24H devices are also identified as pin compatible with compatible dsPIC33F family devices, allowing controlled reuse of board layouts when electrical and peripheral requirements match.

The PIC24HJ32GP302 combines a 40 MHz operating speed with 32 KB of Flash memory and up to 2 KB of SRAM. Its reported peripheral configuration includes three 16-bit timers or counters, with two timer pairs capable of forming 32-bit timers, plus two output-capture channels. These resources support time-based control, pulse measurement, frequency measurement, and periodic actuator drive without requiring a separate timing device.

The 21-I/O device provides 21 general-purpose I/O ports for digital interfaces and control signals. Its advanced analog capabilities make it suitable for systems that mix digital processing with measured analog inputs and controlled analog outputs. The 28-QFN-S surface-mount package supports compact, high-density PCB layouts, while the exposed thermal pad provides a practical path for heat transfer when the operating frequency and peripheral load are sustained.

Typical applications include industrial motor controllers, digital power converters, factory automation modules, medical instrumentation, audio and communications control, and general embedded control platforms. For these uses, the 40 MIPS processing rate allows timely execution of control algorithms, while the integrated timers reduce external component requirements.

PCB design should preserve the manufacturer's recommended decoupling and exposed-pad layout, connect all supply pins correctly, and route high-current returns away from sensitive analog inputs. Firmware and peripheral configuration must also be checked against the manufacturer pin-description and device-selection tables before assigning each pin to a final board function.

This product overview consolidates the key electrical, memory, timing, packaging, and application characteristics of the PIC24HJ32GP302-E/MM and provides practical guidance for evaluating the device, planning the PCB, and requesting a quotation for the exact ordered part.

Alternatif penggantian untuk PIC24HJ32GP302-E/MM — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PIC24HJ32GP302-E/MM (sama faktor bentuk dan footprint) — berbeda di dalam Package, Product Type, Program Memory, Timer/Counter Count.

Microchip Technology
Package: 28-lead QFN-S (6 x 6 mm)
Product Type: 16-bit Flash microcontroller
Program Memory: 32 KB Flash (11K x 24 words)

PIC24HJ32GP302-I/MM

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 28-QFN-S (6 x 6 mm)
16-bit Flash microcontroller · PIC24H · 40 MIPS · 32 KB Flash (11K x 24 words) · 21 ports · 3.0 V to 3.6 V · 3 x 16-bit timer/counter · Up to 32-bit operation by pairing two 16-bit timers

Kontak untuk harga

Lihat Datasheet →

PIC24HJ32GP302-E/ML

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 28-QFN-S (6 x 6 mm)
Same 40 MIPS core, 32 KB Flash, 21 I/O and 28-QFN-S footprint; the order-code qualification or marking suffix differs by 0% in listed electrical performance

📋 Alternatif referensi (tidak dalam katalog)

PIC24HJ32GP302-I/ML

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 28-QFN-S (6 x 6 mm)
Same 40 MIPS core, 32 KB Flash, 21 I/O and 28-QFN-S footprint; temperature and qualification suffixes differ by 0% in listed electrical performance

📋 Alternatif referensi (tidak dalam katalog)

PIC24HJ32GP304-E/MM

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 28-QFN-S (6 x 6 mm)
Same 40 MIPS PIC24H architecture and 28-QFN-S footprint; Flash capacity increases from 32 KB, while core speed and I/O count remain equal

📋 Alternatif referensi (tidak dalam katalog)

PIC24HJ32GP304-I/MM

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 28-QFN-S (6 x 6 mm)
Same 40 MIPS PIC24H architecture and 28-QFN-S footprint; Flash capacity increases from 32 KB and the temperature suffix differs

📋 Alternatif referensi (tidak dalam katalog)

PIC24HJ32GP302-E/MM Rating Maksimal & Karakteristik Listrik

Product Type 16-bit high-performance Flash microcontroller
Architecture PIC24H 16-bit architecture
Maximum CPU Speed 40 MHz
Instruction Throughput 40 MIPS
Program Memory 32 KB Flash
Program Memory Organization 11K x 24 words
SRAM Up to 2 KB
Supply Voltage Range 3.0 V to 3.6 V
General-Purpose I/O Ports 21
Timer/Counter Count 3 timers/counters
Timer Configuration Two pairs can form one 32-bit timer
Output Capture Channels 2
Paket 28-QFN-S (6 x 6 mm)
Tipe Mounting Surface mount
Shipping Format Tube
Lead-Free Status Lead-free
Lifecycle Stage Active

PIC24HJ32GP302-E/MM 28-qfn-s (6 x 6 mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk PIC24HJ32GP302-E/MM (28-qfn-s (6 x 6 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 28-qfn-s (6 x 6 mm) untuk PIC24HJ32GP302-E/MM

Tidak ada data diatribut pin yang tersedia untuk PIC24HJ32GP302-E/MM.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

PIC24HJ32GP302-E/MM cocok untuk 6 aplikasis: Industrial Motor Control, Digital Power Conversion, Factory Automation Controller, Medical Instrumentation, Communications Control Module, Audio Processing Controller.

🏭

Industrial Motor Control

The PIC24HJ32GP302-E/MM fits real-time motor-control tasks because its 40 MIPS processing capability provides ample computation for duty-cycle calculation, current-command processing, and state-machine control. The three 16-bit timers can support PWM generation, input capture, or periodic control functions, while two timer pairs can be combined into a 32-bit timer for extended timing intervals. Its 21 I/O ports leave room for encoders, gate drivers, fault signals, and digital interlocks. The device operates from 3.0 V to 3.6 V, matching 3.3 V industrial controller architectures. Place input and output decoupling near the package, connect the exposed pad to the recommended thermal and ground structure, and preserve isolation spacing where the motor stage introduces high dV/dt events.

⚡

Digital Power Conversion

The PIC24HJ32GP302-E/MM is suitable for digital power converters where fast control-loop execution is needed to regulate an analog power stage. At 40 MIPS, the MCU can execute compensation and current-mode control routines while timers provide deterministic switching-frequency and dead-time-related functions. Its 32 KB Flash provides room for control code, fault handling, configuration data, and communication routines, while 21 I/O ports can support pulse-width-modulated commands, comparator outputs, current-sense signals, and supervisory functions. The 3.0 V to 3.6 V supply range suits a 3.3 V control domain. Keep high-current switching loops compact, route analog sense signals away from gate-drive traces, and use the manufacturer layout recommendations to minimize coupling into the controller.

🏭

Factory Automation Controller

The PIC24HJ32GP302-E/MM can serve as the central controller in a compact factory automation module because it combines a 40 MIPS control processor with 21 I/O ports and multiple timing peripherals. Firmware can coordinate sensor acquisition, actuator sequencing, interlocks, diagnostics, and a local communications interface within a 32 KB Flash budget. Two output-capture channels are useful for measuring pulse or timing inputs, and the three timers can support periodic tasks, input capture, or PWM outputs. The 28-QFN-S 6 x 6 mm package helps reduce board area in distributed control boxes. Design the PCB with a stable 3.3 V supply, protected I/O paths, direct copper access to the exposed pad, and separate analog and digital grounding strategies where the module includes sensitive measurement circuitry.

💊

Medical Instrumentation

The PIC24HJ32GP302-E/MM is appropriate for compact medical-instrumentation modules that combine deterministic sampling control, local signal processing, and user or communications interfaces. The 40 MIPS execution rate allows the controller to process acquired measurements and execute control algorithms while maintaining predictable timing through its hardware timers. With 32 KB Flash and up to 2 KB SRAM, it suits focused embedded firmware rather than large data-storage applications. The 21 I/O ports can connect sensors, indicators, and communication transceivers, and the 3.0 V to 3.6 V operating range supports 3.3 V system rails. Medical-system designs must separately determine applicable electrical-safety, isolation, leakage-current, and electromagnetic-compatibility requirements; the MCU qualification alone does not establish compliance for the finished instrument.

🌐

Communications Control Module

The PIC24HJ32GP302-E/MM can be used as the host controller for a communications-oriented embedded module where fast protocol processing and deterministic timing are needed. Its 40 MIPS rate provides headroom for framing, buffering, error handling, and supervisory logic, while three timers support baud-rate generation, timeout management, or periodic synchronization. The 21 available I/O ports can support a serial interface, status indicators, configuration pins, and handshake signals. The 32 KB Flash limit requires careful code budgeting for large protocol stacks, but it remains practical for focused gateways or peripheral controllers. Keep interface routing away from analog timing circuits, follow the exposed-pad land pattern, and validate timing margin with the specific transceiver or network device used in the final design.

🎧

Audio Processing Controller

The PIC24HJ32GP302-E/MM can support audio control and signal-processing tasks where repeated calculations and multiple timers are more important than large storage capacity. Its 40 MIPS throughput can implement control loops, mixing logic, metering, and communication tasks, while three timers can generate sample-related timing or measure external pulse intervals. The 21 I/O ports provide access to audio-control signals, indicators, and serial configuration interfaces. The compact 28-QFN-S package helps fit the controller into a space-constrained audio module, although the target's 32 KB Flash and up to 2 KB SRAM require disciplined buffer management. Follow the manufacturer decoupling and grounding guidance, isolate high-level audio routing from sensitive digital timing, and verify thermal performance with the exposed pad connected to the recommended PCB copper structure.

Ringkasan Produk Direkomendasikan

MCP3561RT-E/SL Precision analog-to-digital converter for motor-current measurement Digunakan di dalam: Industrial Motor Control, Communications Control Module MCP3426A1-E/SN Microchip Technology Digunakan di dalam: Industrial Motor Control MCP6071-E/MC Low-power operational amplifier for analog signal conditioning Digunakan di dalam: Industrial Motor Control MCP3562RT-E/ST Microchip Technology Digunakan di dalam: Digital Power Conversion, Audio Processing Controller MCP3425A0-E/MC Low-power ADC for auxiliary power-converter diagnostics Digunakan di dalam: Digital Power Conversion, Medical Instrumentation MCP6001-E/SN General-purpose amplifier for scaled analog feedback Digunakan di dalam: Digital Power Conversion MCP3564RT-E/ST Microchip Technology Digunakan di dalam: Factory Automation Controller MCP3424RT-E/SL ADC for process and condition monitoring Digunakan di dalam: Factory Automation Controller MCP6061-E/OT Signal-conditioning amplifier for industrial sensor inputs Digunakan di dalam: Factory Automation Controller MCP3565R-E/SFX Microchip Technology Digunakan di dalam: Medical Instrumentation MCP604T-I/ST Microchip Technology Digunakan di dalam: Medical Instrumentation MCP6074-E/ST Microchip Technology Digunakan di dalam: Communications Control Module MCP3427A0-E/MC ADC for auxiliary communication-node monitoring Digunakan di dalam: Communications Control Module MCP6072-E/SN Microchip Technology Digunakan di dalam: Audio Processing Controller MCP3422A7-E/MS Microchip Technology Digunakan di dalam: Audio Processing Controller
What are the key specifications of PIC24HJ32GP302-E/MM?
The PIC24HJ32GP302-E/MM is a 16-bit PIC24H microcontroller rated at 40 MHz or 40 MIPS, with 32 KB of Flash program memory, up to 2 KB of SRAM, and 21 I/O ports. According to the Microchip PIC24HJ32GP302/304 family datasheet, the device includes three 16-bit timers, two output-capture channels, advanced analog resources, and a 3.0 V to 3.6 V operating supply. It is packaged in a compact 28-QFN-S 6 x 6 mm surface-mount package for space-constrained embedded control designs.
Where can I download the PIC24HJ32GP302-E/MM datasheet PDF?
The PIC24HJ32GP302-E/MM datasheet PDF can be downloaded through the Microchip product page or the linked manufacturer-family datasheet on this page. The document covers the PIC24HJ32GP302/304 and related PIC24H device families, including memory, peripherals, electrical characteristics, and package information. Use the manufacturer PDF as the controlling reference for pin assignments, timing, and application guidance rather than relying on a distributor summary.
Where can I find the PIC24HJ32GP302-E/MM pinout?
The PIC24HJ32GP302-E/MM pinout is identified in the pin-description table of the Microchip manufacturer-family datasheet. The device uses a 28-QFN-S package with 28 numbered terminals, including its exposed thermal pad and required power connections. Confirm every signal against the datasheet before assigning analog inputs, communications pins, programming interfaces, and timers because several alternate peripheral functions can share the same physical terminal.
What is the operating voltage of PIC24HJ32GP302-E/MM?
The PIC24HJ32GP302-E/MM operates from 3.0 V to 3.6 V. According to the Microchip PIC24HJ32GP302/304 family datasheet, the device is intended for a 3.3 V system environment. The PCB must therefore provide a supply within that range, maintain adequate decoupling near the package power terminals, and observe the datasheet limits for operating and absolute maximum conditions.
How much Flash memory and SRAM does PIC24HJ32GP302-E/MM have?
The PIC24HJ32GP302-E/MM provides 32 KB of Flash program memory, organized as 11K x 24 words, and supports up to 2 KB of SRAM. According to the Microchip PIC24HJ32GP302/304 family datasheet, the Flash organization suits applications that require substantial firmware storage for control logic, communications stacks, and startup routines. SRAM availability must be considered during buffer allocation and interrupt-service design.
What can the PIC24HJ32GP302-E/MM be used for?
The PIC24HJ32GP302-E/MM is suitable for embedded motor control, digital power conversion, industrial automation, medical instrumentation, and communications control. Its 40 MIPS execution rate supports fast control-loop computation, while three timers and two output-capture channels assist with pulse, frequency, and timing functions. The 28-QFN-S package is especially useful when a compact, high-density controller is required.
Is PIC24HJ32GP302-E/MM suitable for industrial control systems?
Yes, PIC24HJ32GP302-E/MM is suitable for many industrial control systems because it combines a 40 MIPS processor, 21 I/O ports, three timers, two output-capture channels, and advanced analog resources. According to the Microchip product family information, the PIC24H architecture targets high-speed repetitive computations and control. Confirm temperature qualification, isolation requirements, EMC expectations, and safety standards separately for the deployed industrial equipment.
Where can I buy PIC24HJ32GP302-E/MM online?
The PIC24HJ32GP302-E/MM can be requested through the Request a Quote form on this page. The form should be completed with the exact MPN, package suffix, desired shipment format, quantity, and target delivery location. This approach keeps the request tied to the exact 28-QFN-S ordering code and allows current commercial availability, unit pricing, and lead time to be confirmed for the intended build.
What is the price of PIC24HJ32GP302-E/MM?
The current commercial price of PIC24HJ32GP302-E/MM depends on order quantity, shipment format, and current component availability. Submit a request through the Request a Quote form on this page with the exact MPN and required quantity. The quote response provides the applicable commercial terms without embedding a potentially stale price into the technical product description.
What is the lead time for PIC24HJ32GP302-E/MM?
The lead time for PIC24HJ32GP302-E/MM depends on current manufacturer and distribution availability. Use the Request a Quote form on this page to state the required quantity, tube or other shipment format, production schedule, and destination. The request allows the exact part number and order conditions to be checked before a delivery commitment is made.
Is PIC24HJ32GP302-E/MM currently in stock?
Current inventory status for PIC24HJ32GP302-E/MM should be confirmed through the Request a Quote form on this page. Include the exact MPN and required quantity so current availability can be matched to the intended procurement plan. The manufacturer lists the PIC24HJ32GP302 family as active, but a family lifecycle statement does not by itself confirm a stocked quantity.
What is the best drop-in replacement for PIC24HJ32GP302-E/MM?
The closest drop-in replacement must use the same 28-QFN-S footprint and preserve the required Flash, SRAM, timer, analog, and I/O functions. A valid replacement is not established merely because another PIC24H model has a similar instruction set. Compare the Microchip device-selection tables and pin tables for the exact ordering code, then confirm that programming, clock, peripheral, and board-level constraints remain unchanged.
Can PIC24HJ32GP302-E/MM replace a PIC16LC622T-04E/SO?
No, PIC24HJ32GP302-E/MM is not a direct physical replacement for PIC16LC622T-04E/SO. The comparison identifies different microcontroller families, memory configurations, and package formats, so their boards and pin assignments are not interchangeable. The PIC16LC622T-04E/SO is also identified as obsolete in the comparison result. A replacement for the older design must preserve its SOIC footprint and required peripheral functions.
PIC24HJ32GP302-E/MM vs PIC24HJ32GP302-I/MM: which should I choose?
PIC24HJ32GP302-E/MM and PIC24HJ32GP302-I/MM share the core 40 MIPS PIC24H architecture, 32 KB Flash memory, 21 I/O ports, and 28-QFN-S package, while their order-code suffixes identify different temperature grades. Choose the suffix that matches the application's specified environmental range. Confirm the exact grade limits in the Microchip ordering information before treating either device as a drop-in choice.
When should I choose PIC24HJ32GP302-E/MM over another 16-bit MCU?
Choose PIC24HJ32GP302-E/MM when a design specifically benefits from the PIC24H combination of 40 MIPS performance, 32 KB Flash, up to 2 KB of SRAM, advanced analog resources, three timers, and a compact 28-QFN-S package. It is particularly appropriate for deterministic control with moderate firmware storage requirements. Select another MCU when its memory, package, peripheral set, ecosystem, qualification, or long-term availability better matches the product requirements.
What Microchip cross reference should I check for PIC24HJ32GP302-E/MM?
Use Microchip's official cross-reference search with PIC24HJ32GP302-E/MM, then validate every proposed match against the device-selection table and package pin diagram. Microchip identifies the PIC24H family as pin compatible with compatible dsPIC33F devices, but compatibility must be confirmed for the specific pin count, memory size, voltage, peripherals, and programming configuration. The manufacturer's product page and cross-reference search are the appropriate starting points for qualification.

Data referensi engineering untuk PIC24HJ32GP302-E/MM — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose PIC24HJ32GP302-E/MM for compact embedded-control designs that require a 40 MIPS 16-bit processor, 32 KB Flash, up to 2 KB SRAM, 21 I/O ports, advanced analog resources, and three timers in a 28-QFN-S package. It is a strong fit for industrial control, digital power conversion, instrumentation, and communications modules where deterministic execution and limited board space matter. Choose the same-family suffix corresponding to a broader temperature or qualification requirement when the application demands it, after confirming those ordering details in Microchip documentation. Consider PIC24HJ32GP304-E/MM when additional family Flash capacity is needed and its pin and peripheral configuration remains compatible, but verify the exact memory difference and package mapping. Do not substitute a smaller PIC16 device merely for a lower-cost controller; the different architecture, memory capacity, I/O count, and footprint require a board-level redesign. Confirm exposed-pad implementation, power sequencing, programming method, and peripheral availability before releasing a new PCB.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini PIC24HJ32GP302-I/MM PIC24HJ32GP302-E/ML PIC24HJ32GP302-I/ML PIC24HJ32GP304-E/MM PIC24HJ32GP304-I/MM
Package 28-QFN-S (6 x 6 mm) 28-QFN-S (6 x 6 mm) 28-QFN-S (6 x 6 mm) 28-QFN-S (6 x 6 mm) 28-QFN-S (6 x 6 mm) 28-QFN-S (6 x 6 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Speed 40 MHz 40 MHz 40 MHz 40 MHz 40 MHz 40 MHz
Instruction Throughput 40 MIPS 40 MIPS 40 MIPS 40 MIPS 40 MIPS 40 MIPS
Architecture PIC24H 16-bit PIC24H 16-bit PIC24H 16-bit PIC24H 16-bit PIC24H 16-bit PIC24H 16-bit

Diferensiator Kunci

  • Compact high-performance control in a 6 x 6 mm package (vsPIC16LC622T-04E/SO)
  • Higher processing throughput for real-time control (vsPIC16LC622T-04E/SO)
  • Integrated timing resources reduce external component count (vsPIC16LC622T-04E/SO)

Catatan Desain

Follow the manufacturer's 28-QFN-S recommended land pattern and exposed-pad connection instructions exactly. Place the required input and output decoupling capacitors close to their associated package terminals, keep the exposed pad thermally and electrically connected as directed, and avoid placing high-current return paths beneath sensitive analog inputs. The package's 6 x 6 mm footprint offers little routing area, so component placement and via placement should be planned together rather than added after schematic completion.

Design the 3.3 V supply rail to remain within the 3.0 V to 3.6 V operating range under startup, transient, and full-load conditions. Account separately for the digital core, analog resources, I/O current, and any external loads connected through the MCU pins. Use the manufacturer input-voltage and decoupling requirements as the basis for capacitor selection, and verify the power source does not generate excursions that compromise controller timing or peripheral accuracy.

Separate high-speed or high-current digital paths from analog inputs wherever the board permits. Route oscillator and reference signals away from switching nodes and noisy inductors, use a continuous ground reference under the device where recommended, and assign unused pins according to the datasheet rather than leaving their disposition to assumption. For mixed-signal boards, establish the analog return path at the converter and connect it to the quiet ground region near the MCU's analog supply and bypass capacitor.

Do not assume that every PIC24H or dsPIC33F device with a related family name is interchangeable. Confirm the exact package pin count, exposed-pad requirements, Flash size, SRAM size, peripheral availability, voltage range, timing grade, and programming configuration. The family-level statement about dsPIC33F pin compatibility is not a blanket substitution rule, so verify each proposed cross reference against the specific Microchip device-selection and pin tables before releasing production artwork.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The listed part is described as lead-free. RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification details were not established by the retrieved product information.

Pencarian Terkait

PIC24HJ32GP302-E/MM datasheet PIC24HJ32GP302-E/MM pinout PIC24HJ32GP302-E/MM specifications PIC24HJ32GP302-E/MM price PIC24HJ32GP302-E/MM stock PIC24HJ32GP302-E/MM replacement PIC24HJ32GP302-E/MM equivalent PIC24HJ32GP302 28-QFN-S pinout PIC24HJ32GP302 40 MIPS microcontroller Microchip PIC24HJ32GP302 PIC24HJ32GP302 motor control application PIC24HJ32GP302 vs PIC24HJ32GP304 PIC24HJ32GP302 digital power control PIC24HJ32GP302 cross reference

Komponen dan Istilah Terkait

Microchip Technology PIC24HJ32GP302-E/MM PIC24HJ32GP302 PIC24HJ32GP302-I/MM PIC24HJ32GP302-E/ML PIC24HJ32GP302-I/ML PIC24HJ32GP304-E/MM PIC24HJ32GP304-I/MM PIC24H 16-bit microcontroller high-performance microcontroller embedded control semiconductor 40 MIPS 32 KB Flash 2 KB SRAM 21 I/O ports 28-QFN-S QFN family surface mount advanced analog industrial automation motor control digital power conversion 3.3 V supply
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ