R5F211B2NP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics
MPN: R5F211B2NP#U0 ✗ کۆتایی ژیانR5F211B2NP#U0 گشتی
An R8C microcontroller is a 16-bit embedded processing device within the broader semiconductor and microcontroller hierarchy. It integrates CPU execution, flash program memory, data memory, timers, serial interfaces, analog functions, and interrupt-controlled I/O into one package. The R8C core is designed around efficient C-language instruction execution, allowing compact firmware to control motors, sensors, communications links, and user-interface peripherals without requiring a separate processor.
Key characteristics include a 16-bit R8C CPU core, a maximum listed clock frequency of 20 MHz, and 8 KB of flash memory organized as 8K by 8 bits. The controller supports 3.3 V and 5 V operation and is offered in a Pb-free 28-pin HWQFN package. These parameters position it for embedded industrial controls, compact instruments, consumer peripherals, and low-to-medium-complexity control products where a small package and established R8C software ecosystem are important.
Technically, the device belongs to the R8C/1B group and uses a high-performance silicon-gate CMOS process. Its flash-based program memory supports in-system firmware storage, while the R8C CPU core provides 16-bit processing without the pin count of larger general-purpose packages. Peripheral requirements and detailed electrical limits should be confirmed against the pin assignment table and electrical characteristics in the R8C/1A, R8C/1B Group Datasheet before a production design is released.
Typical applications include compact motor controllers, temperature-measurement instruments, programmable control panels, sensor-interface nodes, and communication modules. The 20 MHz clock is suitable for time-based control tasks, and the 8 KB flash budget favors focused firmware with concise interrupt handlers and compact application logic. Designers should allocate flash for boot, communication, and application routines without assuming capacity equivalent to larger general-purpose MCUs.
The most important layout consideration is the 5 mm by 5 mm HWQFN land pattern. Follow the manufacturer pin-assignment figure for the PWQN0028KA-B package, expose the thermal pad according to the recommended land pattern, and route sensitive analog or timing signals away from switching nodes. Confirm operating voltage, peripheral availability, and startup behavior against the device-specific datasheet before adding external components.
This product summary consolidates the verified R8C/1B identity, memory capacity, clock rate, supply options, package details, sourcing information, and same-package family comparison into a design-focused reference. The manufacturer datasheet remains the controlling document for pinout, electrical limits, timing, peripheral functions, and programming details.
جێگرەوەکانی جێگۆڕکێ بۆ R5F211B2NP#U0 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ R5F211B2NP#U0 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package Type.
R5F211A2NP#U0
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →R5F211B2NP#U0 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 16-bit R8C/1B-series microcontroller |
| CPU Architecture | R8C 16-bit CISC core |
| زۆرترین فرێکوێنسیی کاتژمێر | 20 MHz |
| Flash Memory Capacity | 8 KB |
| Flash Memory Organization | 8K x 8 bits |
| ڤۆڵتاژی دابینکردنی کارکردن | 3.3 V or 5 V |
| Package Type | 28-pin HWQFN |
| Package Dimensions | 5 mm x 5 mm |
| Manufacturer Package Designation | PWQN0028KA-B |
| جۆری دامەزراندن | Surface mount |
| Shipping Format | Tube |
| Lead-Free Status | Pb-free |
| Programming Memory | 8 KB flash |
ڕێنمایی ڕێکخستنی پینی R5F211B2NP#U0 pwqn0028ka-b
ڕێکخستنی پین بۆ R5F211B2NP#U0 (پاکێجی pwqn0028ka-b). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ R5F211B2NP#U0.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
R5F211B2NP#U0 گونجاوە بۆ 6 بەکارھێنانs: Compact Temperature-Control Instruments, Compact Motor-Control Modules, Industrial Sensor-Interface Nodes, Programmable Control Panels, Consumer Appliance Controls, Communication-Assist Modules.
Compact Temperature-Control Instruments
The R5F211B2NP#U0 suits compact temperature-control instruments because its 16-bit R8C core runs at up to 20 MHz and provides 8 KB of flash for sensor acquisition, filtering, display control, and alarm logic. The 28-pin HWQFN footprint reduces board area compared with a larger leaded package, which is useful in handheld probes and panel-mounted process controllers. Firmware can use periodic timer interrupts for stable sampling while keeping the control task responsive. Before finalizing the design, confirm the required ADC channels, timer resources, operating-temperature limits, and sensor-interface electrical characteristics in the manufacturer datasheet. The 8 KB memory budget should also be checked against bootloader, calibration, communications, and safety-function requirements.
پێشنیارکراو
Compact Motor-Control Modules
The R5F211B2NP#U0 can serve as the control processor in a compact brushless-motor or stepper-control module. Its 20 MHz R8C core is suitable for interpreting position commands, sequencing commutation states, and coordinating protection timers, while 8 KB of flash is appropriate for focused embedded control code rather than a large graphical interface. The 5 mm by 5 mm HWQFN package allows the controller to sit close to the motor driver and power stage. Designers should use PWM and general-purpose timer outputs only if they are available on the required package pins. Gate-drive timing, current sensing, fault handling, and thermal conditions must be verified against the manufacturer pin assignment and electrical characteristics before connecting a power stage.
پێشنیارکراو
Industrial Sensor-Interface Nodes
The R5F211B2NP#U0 is appropriate for compact industrial sensor nodes that convert measurements from resistive, digital, or simple analog sensors into a higher-level status signal. Its 16-bit architecture supports signed arithmetic and control logic, and the 20 MHz clock provides practical headroom for debouncing, filtering, diagnostics, and communication framing. With only 8 KB of flash, the firmware should be organized around the node's core measurement and reporting functions instead of broad application middleware. The 28-pin HWQFN also supports compact PCB layouts near the sensor connector. Validate the available I/O, analog input count, serial interface selection, supply tolerances, and industrial temperature requirements in the R8C/1A, R8C/1B Group Datasheet before production release.
پێشنیارکراو
Programmable Control Panels
The R5F211B2NP#U0 is well matched to small programmable control panels that coordinate switch inputs, status lamps, a display, and a serial host connection. The 16-bit R8C core can execute event handling and menu-state logic at up to 20 MHz, while 8 KB flash constrains the application to a focused user interface and configuration model. Its 28-pin 5 mm by 5 mm HWQFN package helps preserve panel space for the display and connector. The design should confirm whether the exposed package pad requires specific thermal-via and copper guidance and whether all required display, communication, and indicator pins are accessible. Use the manufacturer pin-assignment figure as the basis for the schematic symbol and PCB footprint.
پێشنیارکراو
Consumer Appliance Controls
The R5F211B2NP#U0 can coordinate compact consumer-appliance functions such as button input, timing, motor or heater commands, and status reporting. Its 16-bit R8C architecture is suited to responsive embedded control, and the 20 MHz operating frequency allows deterministic interrupt-driven sequencing without an external processor. The Pb-free 28-pin HWQFN package supports dense board layouts, while the 8 KB flash capacity favors a simple, dedicated firmware image. Designers should avoid adding large protocol stacks unless the application, linker map, and boot requirements have been reviewed. Confirm the usable I/O count, reset behavior, watchdog availability, supply conditions, and operating-temperature limits from the device datasheet before adapting an existing appliance architecture.
پێشنیارکراو
Communication-Assist Modules
The R5F211B2NP#U0 can be used in a communication-assist module that frames sensor data, handles simple protocol commands, and supervises a serial link. The 16-bit R8C core running at up to 20 MHz is capable of supporting interrupt-driven byte or packet processing, while the 8 KB flash budget is best suited to a focused protocol stack and application-specific state machine. The small 28-pin HWQFN allows placement beside the communications connector or transceiver. Designers must confirm the exact serial peripheral, available port multiplexing, baud-rate support, and pin assignments for the selected 3.3 V or 5 V configuration. Also review electrical limits and external-interface timing in the manufacturer datasheet rather than assuming compatibility with another R8C member.
پێشنیارکراو
داتای سەرچاوەی ئەندازیاری بۆ R5F211B2NP#U0 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | R5F211A2NP#U0 |
|---|---|---|
| Manufacturer | Renesas Electronics | Renesas Electronics |
| Package | 28-pin HWQFN (5x5 mm) | 28-pin HWQFN (5x5 mm) |
| CPU Architecture | 16-bit R8C CISC | 16-bit R8C CISC |
| R8C Family | R8C/1B | R8C/1A |
| Maximum Clock Frequency | 20 MHz | 20 MHz |
| Flash Memory Capacity | 8 KB | 8 KB |
| Flash Memory Organization | 8K x 8 bits | 8K x 8 bits |
| Operating Supply Voltage | 3.3 V or 5 V | 3.3 V or 5 V |
| Shipping Format | Tube | Tube |
| Lead-Free Status | Pb-free | Pb-free |
جیاکەرەوە سەرەکییەکان
- Uses the R8C/1B rather than R8C/1A family (بەراورد بەR5F211A2NP#U0)
- Same compact 28-pin HWQFN footprint (بەراورد بەR5F211A2NP#U0)
- 20 MHz processing with 8 KB flash (بەراورد بەR5F211A2NP#U0)
تێبینییەکانی دیزاین
Create the PCB land pattern from the Renesas PWQN0028KA-B package drawing rather than from a generic 28-pin QFN library. Confirm pin-one orientation, exposed-pad dimensions, solder-mask clearance, and copper treatment against the manufacturer figure. Place the device close to decoupling and the protected pad connected to the recommended ground-copper arrangement to minimize loop area and support heat transfer.
Separate the MCU's 3.3 V or 5 V supply requirement from the chosen operating configuration and verify every rail against the electrical characteristics table. Place local high-frequency bypass capacitance at the supply pins and keep the return path short. Confirm startup, reset, and input-level requirements for connected sensors or communication transceivers so that logic thresholds remain compatible with the selected supply voltage.
Assign external crystals, timers, serial signals, and programming or debug functions only after checking the PWQN0028KA-B pin-assignment figure. Keep oscillator routing compact and away from high-current switching nodes. For mixed-signal designs, separate analog inputs and their return paths from digital clocks and switching-node copper, and follow the exposed-pad grounding pattern shown in the manufacturer package documentation.
Do not assume that another R8C MCU with the same flash size and package is firmware- or pin-compatible. The R5F211A2NP#U0 is an R8C/1A device, whereas the target is an R8C/1B device. Before substitution, compare pin names, peripheral channels, interrupt vectors, registers, timing values, startup behavior, and development-tool support. Also budget the 8 KB flash carefully before adding libraries or communication stacks.
زانیاری پابەندبوون
The distributor listing identifies R5F211B2NP#U0 as Pb-free. No separate RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was stated in the product records.