SI3210-E-FM - 3.3V/5V ProSLIC Codec | Skyworks Solutions
MPN: SI3210-E-FM ✓ چالاکSI3210-E-FM گشتی
A ProSLIC is a programmable CMOS Subscriber Line Interface Circuit that replaces many discrete functions associated with an analog telephone line. Within the telecommunications hierarchy, the SI3210-E-FM combines a SLIC, codec, ringing generator, and battery supply into one integrated interface. This consolidation reduces the number of external line-driver and codec functions required in a voice-access design while retaining software control over line behavior.
Key capabilities include software-configurable internal ringing with up to 5 REN and support for ringing voltage as high as 90 VPK. The integrated signaling support includes DTMF generation and decoding and Caller ID generation. These functions make the device suitable for analog telephone endpoints, voice-over-Packet systems, embedded voice processors, and other equipment that must connect a copper subscriber line to a digital voice path.
The SI3210-E-FM combines a low-voltage CMOS analog front end with a digital signaling and control architecture. Its PCM interface supports connection to a communications processor, while the SPI interface supports configuration and control. The manufacturer family documentation describes DC-DC controller capability that can generate a tracking battery voltage from a 3.3 V to 35 V input, reducing the external power-conversion burden in a line interface design.
Typical uses include voice-over-IP terminal equipment, embedded PBX interfaces, digital loop terminals, analog adapters, and industrial voice modules. The 5 mm by 7 mm QFN package also supports compact board layouts, although careful external-network and line-interface layout remains essential because the device controls high-voltage ringing and battery functions.
A key implementation consideration is the separation between the low-voltage digital interfaces and the telephone-line network. Use the manufacturer application information to select the external protection, transformer or coupling components, ringing components, and bypass capacitors. Keep switching and high-energy ringing loops away from sensitive PCM and SPI routing, and verify all telephone-network voltage and current conditions against the manufacturer limits.
This product page combines the verified package, interface, voltage, current, ringing, and signaling information with application guidance, drop-in alternatives, and design considerations for engineers evaluating the SI3210-E-FM in single-channel voice-access equipment.
جێگرەوەکانی جێگۆڕکێ بۆ SI3210-E-FM — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ SI3210-E-FM (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Digital Interface, Package.
SI3210M-E-FM
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
SI3210-E-GM
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →SI3210-E-FM تایبەتمەندییەکان
| Product Type | Single-channel Subscriber Line Interface Concept (SLIC) and codec |
| Architecture | Programmable CMOS ProSLIC |
| Channel Count | 1 channel |
| ڤۆڵتیەی دابینکردن | 3.3 V or 5 V |
| Typical Supply Current | 88 mA |
| Digital Interface | PCM |
| Control Interface | SPI |
| Integrated Functions | SLIC, codec, ringing generation, and battery-voltage generation |
| Internal Ringing Support | Up to 5 REN |
| Maximum Ringing Voltage | 90 VPK |
| DTMF Support | Generation and decoding |
| Caller ID Support | Generation |
| پاکێج | 38-QFN, 5 mm x 7 mm |
| جۆری دامەزراندن | Surface mount |
| DC-DC Tracking Battery Input | 3.3 V to 35 V |
ڕێنمایی ڕێکخستنی پینی SI3210-E-FM 38-qfn, 5 mm x 7 mm
ڕێکخستنی پین بۆ SI3210-E-FM (پاکێجی 38-qfn, 5 mm x 7 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ SI3210-E-FM.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
SI3210-E-FM گونجاوە بۆ 6 بەکارھێنانs: Voice-over-IP Telephone Endpoint, Embedded PBX Line Card, Analog-to-Digital Voice Gateway, Analog Telephone Adapter, Digital Loop Terminal, Industrial Voice Communication Module.
Voice-over-IP Telephone Endpoint
The SI3210-E-FM fits a Voice-over-IP endpoint because it places the copper-line interface, voice codec, ringing generator, and battery function in one 38-QFN device. Its PCM interface carries the voice path to a communications processor, while SPI supports configuration of the ProSLIC. The integrated circuit supports software-configurable ringing up to 5 REN and 90 VPK, which can reduce the external line-interface component count. The 3.3 V or 5 V supply operation and 88 mA typical current suit compact consumer and enterprise terminals, although the telephone-network protection and transformer or coupling network must be designed according to the manufacturer application guidance.
پێشنیارکراو
Embedded PBX Line Card
An embedded PBX line card can use the SI3210-E-FM to terminate one analog subscriber line while retaining a digital voice path through its PCM interface. The ProSLIC architecture consolidates the SLIC, codec, ringing generation, and battery-voltage generation into a single programmable CMOS component. Its 5 REN and 90 VPK internal-ringing capabilities support programmable line behavior, while DTMF and Caller ID generation add services without separate signaling converters. The 38-QFN 5 mm by 7 mm package helps conserve board area in dense line cards, but designers should provide the recommended line protection and keep high-energy ringing paths isolated from sensitive digital routes.
پێشنیارکراو
Analog-to-Digital Voice Gateway
The SI3210-E-FM is appropriate for a gateway that must bridge an analog subscriber line to a digital transport. Its PCM interface provides the gateway-facing voice path, while SPI allows a host processor to configure line parameters and signaling. The integrated DTMF generation and decoding support dialing and control functions, and Caller ID generation supports identity signaling. With operation from either a 3.3 V or 5 V supply, the device can fit gateways built around either supply rail. Its 38-QFN footprint requires careful grounding and thermal-pad layout, while the external telephone network requires the protection and isolation components specified by the manufacturer.
پێشنیارکراو
Analog Telephone Adapter
A compact analog telephone adapter benefits from the SI3210-E-FM because one component integrates the line interface, codec, ringing, and battery functions required by a subscriber line. The device supports up to 5 REN of software-configurable ringing and a 90 VPK ringing output, allowing the adapter to implement ringing behavior in firmware rather than with a separate fixed control circuit. Its 88 mA typical current and choice of 3.3 V or 5 V operation suit power-constrained portable designs when combined with an appropriate system supply. The key layout requirement is to keep telephone-network and ringing-current paths separated from PCM, SPI, and sensitive analog circuitry.
پێشنیارکراو
Digital Loop Terminal
The SI3210-E-FM can serve as the analog line endpoint of a digital loop terminal, where a network processor communicates with the subscriber-line circuit over PCM and configures the ProSLIC through SPI. Its integrated codec supports digital voice transfer, and the integrated ringing and battery functions reduce the number of discrete telephone-front-end components. DTMF generation and decoding make the endpoint suitable for interactive telephone services. Because the device controls a high-voltage telephone environment, use the manufacturer’s recommended protection network, maintain the specified creepage and clearance, and validate ringing and fault behavior against the applicable system requirements.
پێشنیارکراو
Industrial Voice Communication Module
The SI3210-E-FM can serve in industrial voice modules that connect legacy telephone equipment to a modern digital control network. Programmable ringing, DTMF signaling, Caller ID generation, and PCM/SPI control allow the module to support established telephone behavior while using embedded firmware for configuration. The 3.3 V or 5 V operating range and 88 mA typical current support efficient system architecture, and the compact 38-QFN package limits board consumption. For industrial environments, confirm the exact SI3210-E-FM temperature grade, isolate the line interface as required, and test ringing, surge, and off-hook behavior across the complete operating specification.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ SI3210-E-FM — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | SI3210M-E-FM | SI3210-E-GM |
|---|---|---|---|
| Package | 38-QFN (5 mm x 7 mm) | 38-QFN (5 mm x 7 mm) | 38-QFN (5 mm x 7 mm) |
| Brand | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions |
| Device Type | Single-channel ProSLIC, SLIC and codec | Single-channel ProSLIC, SLIC and codec | ProSLIC, SLIC and codec |
جیاکەرەوە سەرەکییەکان
- High integration in a compact line-interface package (بەراورد بەSI3210-E-GM)
- Complete programmable telephone signaling in one device (بەراورد بەSI3210M-E-FM)
- Flexible low-voltage system integration (بەراورد بەSI3210M-E-FM)
تێبینییەکانی دیزاین
Separate the telephone-network path from PCM, SPI, and sensitive analog traces. High-voltage ringing and battery-current loops can create large transient currents, so route them directly through the recommended protection and coupling network with short return paths. Place the manufacturer-specified bypass capacitors at the device supply pins and use the exposed thermal pad as both a ground reference and heat-spreading area.
Design the 3.3 V or 5 V rail for both average and ringing-operation current transients. The SI3210-E-FM is specified at 88 mA typical current, but line-interface load transients and external ringing components must be evaluated separately. Follow the manufacturer application circuit for supply decoupling and avoid sharing narrow high-current paths between the ProSLIC and unrelated analog loads.
Use the exposed-pad land pattern and maximize nearby ground-plane copper to keep junction temperature controlled. The QFN package has a compact 5 mm by 7 mm body, and thermal performance depends strongly on the PCB copper available for heat spreading. Validate the final assembly at the maximum ambient temperature and highest expected line activity rather than relying only on nominal supply-current figures.
Do not substitute the SI3210M-E-FM or SI3210-E-GM based only on the family name. Compare the manufacturer ordering table, complete 38-pin assignment, operating-temperature grade, qualification status, and lifecycle status before treating either candidate as a drop-in replacement. Telephone-line designs must also include the prescribed protection network and must never rely on SPI or PCM pins as surge-current paths.
زانیاری پابەندبوون
The available manufacturer-family information does not provide explicit compliance statements for the SI3210-E-FM. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering code before production release.