Skyworks Solutions

SI3210-E-FM - 3.3V/5V ProSLIC Codec | Skyworks Solutions

N.º de pieza: SI3210-E-FM ✓ Activo
3.3 V or 5 V Vdss 88 mA Id 38-QFN, 5 mm x 7 mm Package
MOQ: 1 |

SI3210-E-FM Descripción general

Skyworks Solutions SI3210-E-FM is a single-channel ProSLIC Subscriber Line Interface Concept and codec with integrated ringing and battery-voltage generation, operating from a 3.3 V or 5 V supply and drawing 88 mA typical current. The device is packaged in a 38-QFN package measuring 5 mm by 7 mm. PCM and SPI interfaces allow it to connect a telephone line front end to a digital communications system.

A ProSLIC is a programmable CMOS Subscriber Line Interface Circuit that replaces many discrete functions associated with an analog telephone line. Within the telecommunications hierarchy, the SI3210-E-FM combines a SLIC, codec, ringing generator, and battery supply into one integrated interface. This consolidation reduces the number of external line-driver and codec functions required in a voice-access design while retaining software control over line behavior.

Key capabilities include software-configurable internal ringing with up to 5 REN and support for ringing voltage as high as 90 VPK. The integrated signaling support includes DTMF generation and decoding and Caller ID generation. These functions make the device suitable for analog telephone endpoints, voice-over-Packet systems, embedded voice processors, and other equipment that must connect a copper subscriber line to a digital voice path.

The SI3210-E-FM combines a low-voltage CMOS analog front end with a digital signaling and control architecture. Its PCM interface supports connection to a communications processor, while the SPI interface supports configuration and control. The manufacturer family documentation describes DC-DC controller capability that can generate a tracking battery voltage from a 3.3 V to 35 V input, reducing the external power-conversion burden in a line interface design.

Typical uses include voice-over-IP terminal equipment, embedded PBX interfaces, digital loop terminals, analog adapters, and industrial voice modules. The 5 mm by 7 mm QFN package also supports compact board layouts, although careful external-network and line-interface layout remains essential because the device controls high-voltage ringing and battery functions.

A key implementation consideration is the separation between the low-voltage digital interfaces and the telephone-line network. Use the manufacturer application information to select the external protection, transformer or coupling components, ringing components, and bypass capacitors. Keep switching and high-energy ringing loops away from sensitive PCM and SPI routing, and verify all telephone-network voltage and current conditions against the manufacturer limits.

This product page combines the verified package, interface, voltage, current, ringing, and signaling information with application guidance, drop-in alternatives, and design considerations for engineers evaluating the SI3210-E-FM in single-channel voice-access equipment.

Alternativas directas para SI3210-E-FM — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con SI3210-E-FM (mismo factor de forma y huella) — difiere en Digital Interface, Package.

Skyworks Solutions
Digital Interface: PCM and SPI
Package: 38-QFN exposed-pad package, 5 mm x 7 mm
Comparar con SI3210-E-FM →

SI3210M-E-FM

✅ Sustitución directa
📦 38-QFN (5x7)
Same SI3210 ProSLIC family and 38-QFN 5 mm x 7 mm package; the M suffix changes ordering attributes, while core electrical ratings remain aligned within 0%.

📋 Alternativa de referencia (no en el catálogo)

SI3210-E-GM

✅ Sustitución directa
Skyworks Solutions
📦 38-QFN (5x7)
Single-channel Subscriber Line Interface Concept (SLIC)/CODEC · 1 channel · 3.3 V or 5 V · PCM and SPI · 38-QFN exposed-pad package, 5 mm x 7 mm · Surface mount · Software-configurable up to 5 REN, up to 90 VPK · DTMF generation and decoding

Consulte el precio

Ver hoja de datos →

SI3210-E-FM Especificaciones

Product Type Single-channel Subscriber Line Interface Concept (SLIC) and codec
Architecture Programmable CMOS ProSLIC
Channel Count 1 channel
Tensión de alimentación 3.3 V or 5 V
Typical Supply Current 88 mA
Digital Interface PCM
Control Interface SPI
Integrated Functions SLIC, codec, ringing generation, and battery-voltage generation
Internal Ringing Support Up to 5 REN
Maximum Ringing Voltage 90 VPK
DTMF Support Generation and decoding
Caller ID Support Generation
Encapsulado 38-QFN, 5 mm x 7 mm
Tipo de montaje Surface mount
DC-DC Tracking Battery Input 3.3 V to 35 V

Guía de configuración de pines de SI3210-E-FM 38-qfn, 5 mm x 7 mm

Configuración de pines para SI3210-E-FM (encapsulado 38-qfn, 5 mm x 7 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 38-qfn, 5 mm x 7 mm para SI3210-E-FM

No hay datos detallados de patillaje disponibles para SI3210-E-FM.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

SI3210-E-FM es adecuado para 6 aplicacións: Voice-over-IP Telephone Endpoint, Embedded PBX Line Card, Analog-to-Digital Voice Gateway, Analog Telephone Adapter, Digital Loop Terminal, Industrial Voice Communication Module.

📱

Voice-over-IP Telephone Endpoint

The SI3210-E-FM fits a Voice-over-IP endpoint because it places the copper-line interface, voice codec, ringing generator, and battery function in one 38-QFN device. Its PCM interface carries the voice path to a communications processor, while SPI supports configuration of the ProSLIC. The integrated circuit supports software-configurable ringing up to 5 REN and 90 VPK, which can reduce the external line-interface component count. The 3.3 V or 5 V supply operation and 88 mA typical current suit compact consumer and enterprise terminals, although the telephone-network protection and transformer or coupling network must be designed according to the manufacturer application guidance.

🌐

Embedded PBX Line Card

An embedded PBX line card can use the SI3210-E-FM to terminate one analog subscriber line while retaining a digital voice path through its PCM interface. The ProSLIC architecture consolidates the SLIC, codec, ringing generation, and battery-voltage generation into a single programmable CMOS component. Its 5 REN and 90 VPK internal-ringing capabilities support programmable line behavior, while DTMF and Caller ID generation add services without separate signaling converters. The 38-QFN 5 mm by 7 mm package helps conserve board area in dense line cards, but designers should provide the recommended line protection and keep high-energy ringing paths isolated from sensitive digital routes.

🔧

Analog-to-Digital Voice Gateway

The SI3210-E-FM is appropriate for a gateway that must bridge an analog subscriber line to a digital transport. Its PCM interface provides the gateway-facing voice path, while SPI allows a host processor to configure line parameters and signaling. The integrated DTMF generation and decoding support dialing and control functions, and Caller ID generation supports identity signaling. With operation from either a 3.3 V or 5 V supply, the device can fit gateways built around either supply rail. Its 38-QFN footprint requires careful grounding and thermal-pad layout, while the external telephone network requires the protection and isolation components specified by the manufacturer.

☎️

Analog Telephone Adapter

A compact analog telephone adapter benefits from the SI3210-E-FM because one component integrates the line interface, codec, ringing, and battery functions required by a subscriber line. The device supports up to 5 REN of software-configurable ringing and a 90 VPK ringing output, allowing the adapter to implement ringing behavior in firmware rather than with a separate fixed control circuit. Its 88 mA typical current and choice of 3.3 V or 5 V operation suit power-constrained portable designs when combined with an appropriate system supply. The key layout requirement is to keep telephone-network and ringing-current paths separated from PCM, SPI, and sensitive analog circuitry.

🖥️

Digital Loop Terminal

The SI3210-E-FM can serve as the analog line endpoint of a digital loop terminal, where a network processor communicates with the subscriber-line circuit over PCM and configures the ProSLIC through SPI. Its integrated codec supports digital voice transfer, and the integrated ringing and battery functions reduce the number of discrete telephone-front-end components. DTMF generation and decoding make the endpoint suitable for interactive telephone services. Because the device controls a high-voltage telephone environment, use the manufacturer’s recommended protection network, maintain the specified creepage and clearance, and validate ringing and fault behavior against the applicable system requirements.

🏭

Industrial Voice Communication Module

The SI3210-E-FM can serve in industrial voice modules that connect legacy telephone equipment to a modern digital control network. Programmable ringing, DTMF signaling, Caller ID generation, and PCM/SPI control allow the module to support established telephone behavior while using embedded firmware for configuration. The 3.3 V or 5 V operating range and 88 mA typical current support efficient system architecture, and the compact 38-QFN package limits board consumption. For industrial environments, confirm the exact SI3210-E-FM temperature grade, isolate the line interface as required, and test ringing, surge, and off-hook behavior across the complete operating specification.

Resumen de productos recomendados

SI3210PPQX-EVB ProSLIC analog front-end evaluation board Se usa en: Voice-over-IP Telephone Endpoint, Embedded PBX Line Card, Analog Telephone Adapter, Industrial Voice Communication Module SI3210M-E-FM Same-family single-channel ProSLIC Se usa en: Voice-over-IP Telephone Endpoint, Embedded PBX Line Card, Analog-to-Digital Voice Gateway, Analog Telephone Adapter, Digital Loop Terminal, Industrial Voice Communication Module SI3210-E-GM Skyworks Solutions Se usa en: Analog-to-Digital Voice Gateway, Digital Loop Terminal
What is the SI3210-E-FM?
The SI3210-E-FM is a single-channel programmable CMOS ProSLIC that integrates a Subscriber Line Interface Concept, codec, ringing generation, and battery-voltage generation. According to the Skyworks Solutions manufacturer datasheet, it operates from a 3.3 V or 5 V supply, draws 88 mA typical current, and uses PCM and SPI interfaces in a 38-QFN package measuring 5 mm by 7 mm.
Where can I download the SI3210-E-FM datasheet PDF?
The SI3210-E-FM datasheet PDF is available from the manufacturer document titled Si3210/Si3211 Data Sheet. It describes the ProSLIC programmable CMOS SLIC and codec, including the 5 REN internal-ringing capability, 90 VPK ringing operation, DTMF generation and decoding, Caller ID generation, PCM interface, and SPI interface. Use the manufacturer datasheet for the authoritative pin descriptions and application circuitry.
Where can I find the SI3210-E-FM pinout and package details?
The SI3210-E-FM uses a 38-QFN package with a 5 mm by 7 mm body, and the authoritative pin numbering appears in the manufacturer pin-description table. The public catalog information confirms the package and pin count, while a machine-readable 38-pin package drawing is not available in the package library. Request the manufacturer datasheet and use its pin-description table when assigning PCB tracks.
What are the key specifications of SI3210-E-FM that engineers should know?
The principal SI3210-E-FM specifications are a 3.3 V or 5 V supply, 88 mA typical current, one telephone channel, PCM and SPI interfaces, and a 38-QFN 5 mm by 7 mm package. The integrated ProSLIC also supports up to 5 REN of software-configurable ringing, 90 VPK ringing voltage, DTMF generation and decoding, Caller ID generation, ringing generation, and battery-voltage generation.
What telephone-line functions are integrated into the SI3210-E-FM?
The SI3210-E-FM integrates the SLIC, codec, ringing generation, and battery-voltage generation into one programmable CMOS device. According to the manufacturer datasheet, software-configurable internal ringing supports up to 5 REN and 90 VPK, while the signaling functions include DTMF generation and decoding and Caller ID generation. These functions reduce the external circuitry required for a complete analog telephone interface.
Is the SI3210-E-FM suitable for a Voice-over-IP telephone endpoint?
Yes, the SI3210-E-FM is suitable for a Voice-over-IP endpoint because it combines the copper-line interface, voice codec, programmable ringing, and digital control functions in one package. Its PCM interface connects the voice path to a digital processor, while SPI supports device configuration. The design must also include the manufacturer-recommended line-network protection and passive components.
Where can I buy the SI3210-E-FM online?
Use the Request a Quote form on this page to ask for SI3210-E-FM availability, commercial terms, and a current delivered quotation. The form is the appropriate route for a programmed telecom-interface component because quantity, delivery schedule, and contract conditions can affect the final supply arrangement. No fixed commercial figure is published here because such terms change by order and time.
What is the current price of the SI3210-E-FM?
The current commercial terms for the SI3210-E-FM are handled through the Request a Quote form on this page. Submit the required quantity, target delivery date, and shipment location to obtain an up-to-date quotation. The page intentionally avoids presenting a static price because programmable telecom-interface supply and order terms can vary with quantity and purchasing conditions.
What is the lead time and stock status for SI3210-E-FM?
Request the current lead time and stock allocation through the Request a Quote form on this page. Include the required quantity, reel or tray format, and target delivery date so the supplier can confirm the appropriate manufacturing and fulfillment plan. The device is identified as an active catalog part, but a guaranteed quantity and delivery schedule require current order confirmation.
SI3210-E-FM vs SI3210M-E-FM — which is the better choice?
Both SI3210-E-FM and SI3210M-E-FM are listed in the same 38-QFN 5 mm by 7 mm ProSLIC family, but the exact ordering-code distinction must be confirmed before substitution. The SI3210M-E-FM appears as a related catalog variant in the manufacturer family documentation. Review the manufacturer ordering table and pin-description table to determine whether the M suffix affects temperature, packing, or another ordering attribute.
When should I choose SI3210-E-FM instead of SI3210-E-GM?
Choose the SI3210-E-FM when the project requires the exact E-FM ordering configuration and the SI3210-E-GM does not meet its environmental or ordering requirements. The G-M variant is documented within the same ProSLIC family, but its suffix-specific attributes must be checked against the manufacturer ordering information. The deciding factors should include temperature grade, lifecycle status, qualification, and assembly packing rather than package name alone.
What is the best drop-in replacement for SI3210-E-FM?
The SI3210M-E-FM is the closest verified same-brand drop-in candidate because it is listed in the same 38-QFN 5 mm by 7 mm ProSLIC family. The SI3210-E-GM is another family candidate, but its suffix-specific characteristics must be reviewed before a production substitution. Confirm pinout, electrical limits, temperature grade, qualification, and lifecycle status against the manufacturer datasheet.
Can another manufacturer replace the SI3210-E-FM without PCB changes?
No verified cross-brand, pin-compatible drop-in replacement is established for the SI3210-E-FM. The available cross-reference information does not identify a competing device with the same 38-pin footprint, PCM and SPI interfaces, ringing functions, and complete pin assignments. Treat any cross-brand proposal as a new design comparison rather than a drop-in replacement until pin-level and electrical compatibility have been independently demonstrated.
What can replace the SI3210-E-FM?
The closest supported replacement path is the SI3210M-E-FM, subject to confirmation of the ordering-code differences and operating limits in the manufacturer documentation. The SI3210-E-GM may also be considered within the same ProSLIC family. Neither should be installed solely because the names are similar; compare the complete pin list, supply requirements, ringing limits, temperature range, and qualification records first.
Does the SI3210-E-FM require a heatsink?
The SI3210-E-FM is specified for 3.3 V or 5 V operation with 88 mA typical current, so its normal low-voltage dissipation is generally modest compared with a power-switching device. The 38-QFN package nevertheless requires an exposed-pad-aware PCB layout and adequate copper for heat spreading. Actual junction temperature depends on supply voltage, load, ambient temperature, and PCB thermal resistance, so high-temperature systems should follow the manufacturer thermal guidance.

Datos de referencia de ingeniería para SI3210-E-FM — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the SI3210-E-FM when designing a single-channel copper telephone-line interface that requires an integrated codec, programmable ringing, DTMF, Caller ID generation, and compact 38-QFN packaging. It is particularly suitable for Voice-over-IP terminals, embedded PBX line cards, digital loop terminals, and analog telephone adapters operating from a 3.3 V or 5 V rail. The SI3210M-E-FM is the closest verified family alternative when its ordering-code attributes meet the project requirements. Consider the SI3210-E-GM when its specific suffix, environmental grade, qualification, or lifecycle characteristics provide a better fit. Neither same-brand alternative should be treated as automatically interchangeable until the manufacturer ordering table and 38-pin assignments are checked. No verified cross-brand drop-in replacement was identified; changing manufacturers therefore requires a new footprint, electrical, firmware, and telephone-network design review rather than a simple PCB substitution.

Comparación con alternativas

Parámetro Este producto SI3210M-E-FM SI3210-E-GM
Package 38-QFN (5 mm x 7 mm) 38-QFN (5 mm x 7 mm) 38-QFN (5 mm x 7 mm)
Brand Skyworks Solutions Skyworks Solutions Skyworks Solutions
Device Type Single-channel ProSLIC, SLIC and codec Single-channel ProSLIC, SLIC and codec ProSLIC, SLIC and codec

Diferenciadores clave

  • High integration in a compact line-interface package (frente a SI3210-E-GM)
  • Complete programmable telephone signaling in one device (frente a SI3210M-E-FM)
  • Flexible low-voltage system integration (frente a SI3210M-E-FM)

Notas de diseño

Separate the telephone-network path from PCM, SPI, and sensitive analog traces. High-voltage ringing and battery-current loops can create large transient currents, so route them directly through the recommended protection and coupling network with short return paths. Place the manufacturer-specified bypass capacitors at the device supply pins and use the exposed thermal pad as both a ground reference and heat-spreading area.

Design the 3.3 V or 5 V rail for both average and ringing-operation current transients. The SI3210-E-FM is specified at 88 mA typical current, but line-interface load transients and external ringing components must be evaluated separately. Follow the manufacturer application circuit for supply decoupling and avoid sharing narrow high-current paths between the ProSLIC and unrelated analog loads.

Use the exposed-pad land pattern and maximize nearby ground-plane copper to keep junction temperature controlled. The QFN package has a compact 5 mm by 7 mm body, and thermal performance depends strongly on the PCB copper available for heat spreading. Validate the final assembly at the maximum ambient temperature and highest expected line activity rather than relying only on nominal supply-current figures.

Do not substitute the SI3210M-E-FM or SI3210-E-GM based only on the family name. Compare the manufacturer ordering table, complete 38-pin assignment, operating-temperature grade, qualification status, and lifecycle status before treating either candidate as a drop-in replacement. Telephone-line designs must also include the prescribed protection network and must never rely on SPI or PCM pins as surge-current paths.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The available manufacturer-family information does not provide explicit compliance statements for the SI3210-E-FM. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering code before production release.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

si3210 datasheet silabs si3210 SI3210-E-FM datasheet SI3210-E-FM datasheet pdf SI3210-E-FM pinout SI3210-E-FM specifications SI3210-E-FM equivalent SI3210-E-FM replacement SI3210-E-FM cross reference SI3210-E-FM vs SI3210M-E-FM SI3210-E-FM footprint SI3210-E-FM application circuit SI3210-E-FM price SI3210-E-FM stock Skyworks Solutions SI3210-E-FM

Componentes & términos relacionados

Skyworks Solutions Silicon Laboratories SI3210-E-FM SI3210M-E-FM SI3210-E-GM SI3210PPQX-EVB ProSLIC Subscriber Line Interface Concept SLIC codec programmable CMOS PCM interface SPI interface telephone line interface ringing generator battery-voltage generation DTMF Caller ID 38-QFN QFN package family surface-mount package Voice-over-IP embedded PBX digital loop terminal power management IC
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ