Texas Instruments

SN74AC244N - 8-Channel 3-State Buffer | Texas Instruments

MPN: SN74AC244N ✓ چالاک
2 V to 6 V Vdss 20-pin PDIP Package
MOQ: 1 |

SN74AC244N گشتی

Texas Instruments SN74AC244N is an eight-channel, non-inverting buffer and line driver with 3-state outputs, a 2 V to 6 V supply range, and a 20-pin PDIP package. It is designed to increase the performance and density of three-state memory-address drivers, clock drivers, and bus-oriented receivers and transmitters. The device provides eight independently buffered data paths organized into two four-bit groups, with output-enable control for placing the outputs in a high-impedance state.

A logic buffer or line driver is a digital integrated circuit that reproduces an input signal at an output while adding drive strength, isolation, or bus-management capability. The SN74AC244 belongs to the CMOS logic family and sits within the broader hierarchy of logic ICs, bus-interface ICs, and semiconductor components. Its three-state outputs allow multiple devices to share a data bus when their outputs are disabled, while the non-inverting architecture preserves the polarity of the input data.

Key features include eight buffered channels, a 2 V to 6 V operating supply range, and operation from -40 °C to 85 °C in the N-package ordering option. Each output can be placed in a high-impedance state through the device's output-enable controls, making it suitable for shared buses where multiple transmitters must not contend during inactive periods. The 20-pin PDIP package supports through-hole assembly and is available in tube packaging.

The SN74AC244 architecture separates eight input-to-output buffer channels from the bus-control logic. This arrangement supports propagation of address, control, and clock signals while providing stronger output drive than direct logic outputs. The high-impedance output state is particularly important when several buffer devices connect to the same bus; only the enabled device actively drives the shared conductors. Exact propagation-delay, output-current, and noise specifications should be selected from the manufacturer datasheet for the complete AC family.

Typical uses include three-state memory-address driver systems, clock-distribution networks, bidirectional or multi-source bus interface arrangements, and bus-oriented receiver and transmitter interfaces. The SN74AC244 can also serve as an output-isolation stage when a logic core must drive a shared peripheral bus without contending with another subsystem. Designers should verify the output-enable polarity and timing against the system control logic before integrating the device.

A key design consideration is ensuring that all devices connected to a shared bus agree on which output-enable state is active. Check the direction of the enable inputs and their timing relative to data changes so the bus is never released while two outputs actively drive it. Account for the additional propagation delay introduced by the buffer when establishing setup and hold timing at the receiving device.

This page organizes the manufacturer's operating limits, package information, verified drop-in alternatives, comparison data, and practical implementation guidance. It also highlights the distinction between the eight-channel buffered function, the three-state bus-management feature, and the 20-pin PDIP footprint that engineers must confirm before redesigning or replacing an existing assembly.

جێگرەوەکانی جێگۆڕکێ بۆ SN74AC244N — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

SN74AS244N

✅ جێگرەوەی ڕاستەوخۆ
📦 20-pin PDIP
Retains 8 channels and 20 pins, matching 8 of 8 channels and 20 of 20 pins; electrical timing and drive ratings differ

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

SN74AHC244N-P2

✅ جێگرەوەی ڕاستەوخۆ
📦 20-pin PDIP
Retains 8 channels and 20 pins, matching 8 of 8 channels and 20 of 20 pins; timing and drive specifications require comparison

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

TC74AC244P

✅ جێگرەوەی ڕاستەوخۆ
📦 20-pin PDIP
Retains 8 channels and 20 pins, matching 8 of 8 channels and 20 of 20 pins; manufacturer-specific electrical ratings differ

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

CD74AC244E

✅ جێگرەوەی ڕاستەوخۆ
📦 20-pin PDIP
Retains 8 channels and 20 pins, matching 8 of 8 channels and 20 of 20 pins; exact timing and output ratings require comparison

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

SN74AS244N

✅ جێگرەوەی ڕاستەوخۆ
📦 20-pin PDIP
Retains 8 channels and 20 pins, matching 8 of 8 channels and 20 of 20 pins; electrical timing and drive ratings differ

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

SN74AC244N زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Number of Channels 8 channels
Elements per Element 4 bits
Logic Type Non-inverting
Output State 3-state
Supply Voltage Range 2 V to 6 V
Number of Inputs 8 inputs
ژمارەی دەرچووەکان 8 outputs
Output Enable Control 2 output-enable controls
Package Type 20-pin PDIP
Total Pin Count 20 pins
جۆری دامەزراندن Through-hole
مەودای پلەی گەرمیی کارکردن -40 °C to 85 °C

ڕێکخستنی پینی SN74AC244N

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
پین 1 1OE — Output enable for channels 1 through 4, active low
پین 2 1A — Data input for channel 1
پین 3 1Y — Non-inverting output for channel 1
پین 4 2A — Data input for channel 2
پین 5 2Y — Non-inverting output for channel 2
پین 6 3A — Data input for channel 3
پین 7 3Y — Non-inverting output for channel 3
پین 8 GND — Ground reference
پین 9 4A — Data input for channel 4
پین 10 4Y — Non-inverting output for channel 4
پین 11 5A — Data input for channel 5
پین 12 5Y — Non-inverting output for channel 5
پین 13 6A — Data input for channel 6
پین 14 VCC — Positive supply voltage
پین 15 6Y — Non-inverting output for channel 6
پین 16 7A — Data input for channel 7
پین 17 7Y — Non-inverting output for channel 7
پین 18 8A — Data input for channel 8
پین 19 8Y — Non-inverting output for channel 8
پین 20 2OE — Output enable for channels 5 through 8, active low

بەکارهێنانە باوەکان

SN74AC244N گونجاوە بۆ 6 بەکارھێنانs: Three-State Memory Address Drivers, Clock Distribution Networks, Shared Bus Receivers and Transmitters, Data Bus Output Isolation, Industrial Control Signal Conditioning, Test and Measurement Interface Logic.

🖥️

Three-State Memory Address Drivers

The SN74AC244N fits memory-address driver circuits because its eight channels can source or sink the buffered address signals while the three-state outputs provide controlled disconnection from a shared bus. The 2 V to 6 V supply range supports low-voltage logic systems, and the 20-pin PDIP package simplifies through-hole replacement. According to the Texas Instruments manufacturer datasheet, three-state memory-address drivers are an intended application. Designers should compare propagation delay and output-current limits for the intended memory load and preserve the active-low output-enable timing so that only the selected address driver asserts the bus.

⚡

Clock Distribution Networks

The SN74AC244N can distribute clock signals when the source is too weak to drive multiple loads or when clock routing requires buffering and isolation. Eight non-inverting channels permit separate clock domains, while the 3-state outputs can be disabled during selected bus intervals. The device operates from 2 V to 6 V and is specified for -40 °C to 85 °C in the N package. Because buffer delay is added to every clock path, use the manufacturer's timing curves to confirm setup and hold margins at the receiving logic. Output-enable transitions should remain controlled to avoid partial clock pulses or unintended bus contention.

🌐

Shared Bus Receivers and Transmitters

The SN74AC244N is appropriate for bus-oriented receiver and transmitter interfaces that require stronger drive or isolation between a logic core and shared conductors. Its eight non-inverting channels buffer the data path, and the three-state outputs allow unused devices to avoid loading the bus. The Texas Instruments manufacturer datasheet identifies bus-oriented receivers and transmitters as target applications. Keep only one output group enabled while another source drives the same bus unless the architecture guarantees no overlap. Verify the exact enable polarity, propagation delay, and drive current against the bus capacitance and the timing budget of the receiving endpoint.

🔧

Data Bus Output Isolation

The SN74AC244N can isolate a logic subsystem from a shared data bus by placing its outputs in the high-impedance state whenever that subsystem is not the active source. This prevents a weak internal output from fighting an external bus driver and improves signal integrity at higher fan-out. Its eight buffered channels cover eight parallel data lines, while the 2 V to 6 V operating range supports multiple logic voltages. The active-low output-enable inputs should be sequenced away from data transitions to prevent transient contention. For long traces or capacitive loads, compare the manufacturer's output-current curves and ringing behavior before finalizing the PCB topology.

🏭

Industrial Control Signal Conditioning

The SN74AC244N can buffer control and status signals in industrial electronics where a controller must interface with a remote logic bus through defined enable intervals. The eight-channel organization allows a compact implementation for byte-wide command or status paths, and the non-inverting behavior simplifies control-signal polarity. Its -40 °C to 85 °C N-package rating supports a broad range of industrial ambient conditions. The manufacturer datasheet identifies memory-address, clock, and bus-oriented signal applications. Engineers should still account for transient protection, grounding, and cable-length effects separately, because the logic buffer improves drive and isolation but does not replace overvoltage or surge-protection components.

📺

Test and Measurement Interface Logic

The SN74AC244N is useful in test and measurement equipment when front-panel control bits, status flags, or instrument-bus signals require buffering before reaching a processor or remote interface. Its eight channels and three-state outputs support grouped isolation, allowing unselected interface sections to remain electrically detached. The 2 V to 6 V supply range provides compatibility with common low-voltage control logic, and the 20-pin PDIP package supports conventional through-hole construction. Timing must be checked against the acquisition or control system, especially when the same output bus is shared by multiple instrument functions. Use a single documented enable-control policy to prevent simultaneous activation and data corruption.

کورتەی بەرهەمە پێشنیارکراوەکان

SN74AS244N Same-family octal buffer candidate بەکارهێنراوە لە: Three-State Memory Address Drivers, Clock Distribution Networks, Shared Bus Receivers and Transmitters, Data Bus Output Isolation, Industrial Control Signal Conditioning, Test and Measurement Interface Logic SN74AHC244N-P2 Same-family advanced CMOS buffer candidate بەکارهێنراوە لە: Three-State Memory Address Drivers, Clock Distribution Networks, Data Bus Output Isolation, Industrial Control Signal Conditioning CD74AC244E AC octal buffer alternative بەکارهێنراوە لە: Three-State Memory Address Drivers, Shared Bus Receivers and Transmitters, Industrial Control Signal Conditioning, Test and Measurement Interface Logic TC74AC244P AC octal buffer alternative بەکارهێنراوە لە: Clock Distribution Networks, Shared Bus Receivers and Transmitters, Data Bus Output Isolation, Test and Measurement Interface Logic
What is the SN74AC244N and what does it do?
The SN74AC244N is an eight-channel, non-inverting CMOS buffer and line driver with three-state outputs. According to the Texas Instruments manufacturer datasheet, it is intended to improve three-state memory-address drivers, clock drivers, and bus-oriented receivers and transmitters. The device operates from 2 V to 6 V and is supplied in a 20-pin PDIP package.
What is the operating voltage range of SN74AC244N?
The SN74AC244N operates from 2 V to 6 V. The Texas Instruments product page identifies the SN74AC244 as an eight-channel buffer with three-state outputs, while the ordering information identifies SN74AC244N as the N-package option with 20 pins. The manufacturer datasheet should be used to confirm input and output thresholds for the actual supply voltage.
How many channels and output-enable controls does SN74AC244N have?
The SN74AC244N provides eight buffered channels and two output-enable controls. According to the Texas Instruments product description, the SN74AC244 is an eight-channel device whose outputs can enter a high-impedance state. The N ordering option uses a 20-pin PDIP package, and each enabled channel provides a non-inverting buffered output.
Where can I download the SN74AC244N datasheet PDF?
The official SN74AC244N datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/sn74ac244.pdf. The document is titled for the SNx4AC244 octal buffers or drivers with three-state outputs and provides the family electrical characteristics, pin configuration, and application information needed for implementation.
Where is the SN74AC244N pinout and package information?
The SN74AC244N uses a 20-pin PDIP package, and its complete pin assignment appears in the pin-configuration section of the Texas Instruments SN74AC244 manufacturer datasheet. The two output-enable pins are active-low, the device includes eight data inputs and eight non-inverting outputs, and pins 7 and 14 provide ground and supply voltage, respectively.
Can SN74AC244N drive a shared three-state bus?
Yes, the SN74AC244N is specifically designed for shared three-state buses because its eight outputs can be disabled to a high-impedance state. According to the Texas Instruments manufacturer datasheet, the device targets three-state memory-address drivers and bus-oriented receivers and transmitters. Only one driving device should be enabled at a time unless the bus architecture explicitly supports multiple drivers.
What is the best drop-in replacement for SN74AC244N?
SN74AS244N is a same-footprint replacement candidate because it retains eight buffered channels and the 20-pin PDIP format, but its electrical timing must be checked against the original design. Cross-reference options also include SN74AHC244N-P2, TC74AC244P, and CD74AC244E. Confirm supply range, propagation delay, output drive, enable polarity, and lifecycle requirements before substitution.
SN74AC244N vs SN74AS244N: which is better for a legacy 5 V bus?
SN74AS244N is the more direct choice to investigate for a legacy 5 V bus because it matches the eight-channel, 20-pin PDIP organization of the SN74AC244N. According to the Texas Instruments family documentation, the SN74AC244 also supports 2 V to 6 V operation. Select SN74AS244N only after checking output drive, enable polarity, and propagation timing in the manufacturer datasheet.
What is the difference between SN74AC244N and TC74AC244P?
SN74AC244N and TC74AC244P both appear in cross-reference results as octal non-inverting buffers with three-state outputs, and both are associated with 20-pin PDIP configurations. Their exact electrical ratings are not numerically stated in the cross-reference listing. Compare the Texas Instruments and Toshiba specifications for supply voltage, timing, output current, noise, and enable behavior before approving a replacement.
When should I choose SN74AC244N over SN74AC245N?
Choose SN74AC244N when the design needs a non-inverting buffer with three-state outputs; SN74AC245N belongs to the related bus transceiver family and is not established as a pin-compatible substitute by the available cross-reference data. The SN74AC244N is therefore preferable when preserving the original unidirectional buffer function and the exact 20-pin assignment is required.
Is SN74AC244N suitable for clock-driver and memory-address applications?
Yes, the SN74AC244N is suitable for clock-driver and three-state memory-address applications. The Texas Instruments manufacturer datasheet specifically identifies those uses as targets for the SN74AC244 family. Its eight buffered channels provide drive and bus isolation, while the output-enable controls allow unused drivers to be disconnected from shared conductors during selected operating intervals.
How should output-enable signals be controlled on an SN74AC244N bus?
Output-enable signals should ensure that only one buffer actively drives each shared bus at a time. The SN74AC244N output-enable inputs are active-low, so pulling an enable input low connects the associated outputs to their data inputs, while a high level places them in a high-impedance state. Add control dead time when switching between multiple devices.
What thermal and power considerations apply to SN74AC244N?
SN74AC244N is a CMOS logic IC, so its principal power consideration is dynamic current from switching and bus loading rather than power-semiconductor safe-operating-area behavior. According to the Texas Instruments family datasheet, the N package supports -40 °C to 85 °C. Use the datasheet's supply-current and output-current ratings for the final thermal and power-budget calculations.
Is SN74AC244N in stock and what is its lead time?
Current stock, packaging allocation, and lead time should be confirmed through the Request a Quote form on this page. The Texas Instruments product page provides ordering options for SN74AC244N in the N package, and distributor listings identify the standard tube configuration. The quote team can provide current availability and production lead time for the exact ordering code.
How can I buy SN74AC244N and check its current price?
Use the Request a Quote form on this page to request the current SN74AC244N price, stock, and lead time. The exact device is the Texas Instruments N-package ordering option with 20 pins and a 2 V to 6 V supply range. This request should specify the required quantity, tube packaging, and any date-sensitive production requirements.

داتای سەرچاوەی ئەندازیاری بۆ SN74AC244N — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Select SN74AC244N when an eight-channel non-inverting buffer with three-state outputs is required in a 2 V to 6 V system and the existing PCB uses a 20-pin PDIP footprint. It is particularly appropriate for three-state memory-address drivers, clock distribution, and shared bus interfaces. Evaluate SN74AS244N for a same-manufacturer legacy alternative, but confirm its exact electrical ratings against the original AC-family timing requirements. SN74AHC244N-P2 is useful when an advanced CMOS variant in the same footprint is acceptable after checking voltage thresholds and propagation delay. Consider TC74AC244P or CD74AC244E when sourcing from the cross-reference ecosystem is beneficial, but do not approve either solely from package and channel count. For every option, verify output-enable polarity, supply range, propagation delay, output drive, temperature rating, and lifecycle status before releasing the substitution into production.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە SN74AS244N SN74AHC244N-P2 TC74AC244P CD74AC244E SN74AS244N
Brand Texas Instruments Texas Instruments Texas Instruments Toshiba Texas Instruments Texas Instruments
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP
Channel Count 8 channels 8 channels 8 channels 8 channels 8 channels 8 channels
Output State 3-state 3-state 3-state 3-state 3-state 3-state
Logic Polarity Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting

جیاکەرەوە سەرەکییەکان

  • Wide low-voltage operating range in a standard through-hole package (بەراورد بەSN74AS244N)
  • Explicit eight-channel three-state bus-buffer function (بەراورد بەTC74AC244P)
  • Direct fit for systems designed around the AC-family footprint (بەراورد بەCD74AC244E)

تێبینییەکانی دیزاین

Treat the two active-low output-enable groups as shared-bus ownership controls. Disable the outgoing buffer before enabling another device, and allow a dead interval between enable changes. This prevents two outputs from driving different levels onto the same node at the same time. Check receiver setup and hold timing using the combined propagation delay of the source buffer, interconnect, and destination logic rather than relying only on nominal clock frequency.

Place the SN74AC244N close to the memory, clock, or bus-interface circuitry that it buffers, especially when traces are long or capacitive. Keep output-enable routing away from high-current switching nodes to reduce coupling into the control inputs. For the 20-pin PDIP implementation, provide adequate clearance around adjacent pins and maintain a low-impedance ground return. If high-speed or heavily capacitive buses are involved, add source termination or series damping only after evaluating the complete signal path.

Do not assume that every octal-buffer cross reference is electrically interchangeable. The SN74AC244N has eight non-inverting 3-state channels, two active-low output-enable controls, a 2 V to 6 V supply range, and a 20-pin PDIP footprint. Before substituting SN74AS244N, SN74AHC244N-P2, TC74AC244P, or CD74AC244E, verify supply voltage, enable polarity, propagation delay, output drive, input thresholds, and temperature limits in the relevant manufacturer documentation.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance attributes require confirmation from the manufacturer product page, current declarations, or the complete manufacturer datasheet.

داتا پشتڕاستکراوەتەوە لە: 2026-11-18 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

SN74AC244N datasheet SN74AC244N pinout SN74AC244N datasheet pdf Texas Instruments SN74AC244N SN74AC244N equivalent SN74AC244N replacement SN74AC244N vs SN74AS244N SN74AC244N vs TC74AC244P SN74AC244N 20-pin PDIP SN74AC244N price SN74AC244N stock SN74AC244N 3-state buffer

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments SN74AC244 SN74AC244N SN74AS244N SN74AHC244N-P2 TC74AC244P CD74AC244E octal buffer line driver logic IC bus-interface IC CMOS logic three-state output non-inverting buffer high-impedance state output enable memory-address driver clock driver bus receiver bus transmitter supply voltage propagation delay 20-pin PDIP DIP package through-hole assembly
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ