SP3232EBEA-L/TR - 2/2 RS-232 Transceiver | MaxLinear
MPN: SP3232EBEA-L/TR ✓ چالاکSP3232EBEA-L/TR گشتی
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic levels. It belongs to the interface IC hierarchy, which includes serial interface transceivers, line drivers, receivers, and multi-protocol interface controllers. Such devices provide electrical conversion and level translation between modern digital systems and older RS-232 equipment.
The SP3232EB series combines two transmit channels and two receive channels in one package. Its 3 V to 5.5 V operating range permits use with both 3.3 V and 5 V systems. The integrated high-efficiency charge pump eliminates the need for an external RS-232 line-power supply, while 0.1 µF charge-pump capacitors simplify PCB implementation. The series also provides 15 kV ESD protection according to the manufacturer cross-reference information.
Operationally, the transmitters drive RS-232 signals onto cable or connector networks, while the receivers provide thresholded inputs for the host UART or logic interface. This division of functions allows a compact port to support both command output and status or data input. The 250 kbps under-load capability is suitable for conventional RS-232 links, including point-of-sale equipment, industrial controllers, data-acquisition systems, and portable or handheld equipment.
Typical implementations place the transceiver between a host controller and an external DB9 or other RS-232 connector. Signal routing should account for the logical relationship between driver outputs and receiver inputs, as well as the protection network required by the target connector and cable environment. The device can also be used where a legacy RS-232 interface must coexist with a modern low-voltage embedded processor.
The principal design consideration is the relationship between supply voltage, charge-pump capacitors, UART logic levels, and connector protection. Place the required capacitors close to their associated pins and keep the high-voltage RS-232 node physically separated from sensitive logic traces. Confirm the exact pin assignment and recommended external components in the manufacturer datasheet before releasing a PCB layout.
This product page combines the verified electrical and package attributes with pin-compatible family options, application guidance, comparison parameters, and practical PCB considerations. It is intended to help engineers identify the correct 16-SSOP RS-232 transceiver and plan the surrounding interface circuit efficiently.
جێگرەوەکانی جێگۆڕکێ بۆ SP3232EBEA-L/TR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ SP3232EBEA-L/TR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Interface Standard, Transceiver Configuration, Maximum Data Rate.
SP3232EET-L/TR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →SP3232EEA-L/TR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →SP3232ECN-L/TR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →SP3232EHCY-L
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3232CAE
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
SP3232EBEA-L/TR تایبەتمەندییەکان
| Product Type | RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps under load |
| RS-232 Standard | EIA/TIA-232-F |
| Charge-Pump Capacitance | 0.1 µF in 3.3 V operation |
| ESD Protection | 15 kV |
| پاکێج | 16-SSOP, 5.30 mm width |
| جۆری دامەزراندن | Surface mount |
| Packaging | Tape and reel |
| Interface Standard | RS-232 |
ڕێنمایی ڕێکخستنی پینی SP3232EBEA-L/TR 16-ssop, 5.30 mm width
ڕێکخستنی پین بۆ SP3232EBEA-L/TR (پاکێجی 16-ssop, 5.30 mm width). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ SP3232EBEA-L/TR.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
SP3232EBEA-L/TR گونجاوە بۆ 6 بەکارھێنانs: Industrial Controller RS-232 Port, Point-of-Sale Terminal Interface, Portable Equipment Serial Link, Data Acquisition Equipment, Embedded Service and Debug Interface, Networking and Telemetry Interface.
Industrial Controller RS-232 Port
The SP3232EBEA-L/TR is suitable for adding a legacy RS-232 port to a 3.3 V industrial controller because it combines two drivers and two receivers with a 3 V to 5.5 V supply range. Its 250 kbps under-load rate accommodates conventional serial-control links, while the integrated charge pump requires only 0.1 µF capacitors in 3.3 V operation. Place the device between the controller UART and a protected RS-232 connector, and verify the logic thresholds against the host processor. The 16-SSOP footprint supports compact assembly, and 15 kV ESD protection strengthens the interface against electrostatic discharge encountered on industrial connection cables.
پێشنیارکراو
Point-of-Sale Terminal Interface
The SP3232EBEA-L/TR can support bidirectional communication between a point-of-sale terminal and a legacy printer, scanner, or customer-facing display. Two driver and two receiver channels provide useful flexibility for command and data paths, while operation from 3 V to 5.5 V lets the interface coexist with either 3.3 V or 5 V system electronics. The 250 kbps rate is suitable for standard RS-232 transaction traffic. Its integrated charge pump reduces external component count by using 0.1 µF capacitors in 3.3 V operation, but connector-side surge and ESD protection must still be considered because those functions are not implied by the internal 15 kV ESD rating alone.
پێشنیارکراو
Portable Equipment Serial Link
The SP3232EBEA-L/TR is well suited to portable or handheld equipment that must communicate with RS-232 accessories over a 3.3 V supply. The low-voltage operating range, integrated charge-pump supply, and 0.1 µF charge-pump capacitors support compact board layouts, while the 250 kbps under-load capability covers many short-distance serial links. Use the two receive channels for status or control signals and the two driver channels for command or data transmission. Keep the RS-232 traces away from sensitive analog and high-speed digital paths, and confirm whether a cable-connected design requires additional connector protection beyond the device's specified 15 kV ESD capability.
پێشنیارکراو
Data Acquisition Equipment
The SP3232EBEA-L/TR can serve as the host-side RS-232 interface in a data-acquisition instrument that exchanges commands and measurement data with a computer or controller. A 250 kbps under-load rate is appropriate for many instrument-control protocols, and the integrated 2/2 channel arrangement permits more flexible point-to-point signaling than a single-driver, single-receiver solution. Operating from 3 V to 5.5 V helps align the interface with embedded processors and modern measurement hardware. Route the bidirectional lines according to the pin-description table, place charge-pump capacitors close to the IC, and isolate the exposed RS-232 node from precision measurement circuitry to minimize coupling.
پێشنیارکراو
Embedded Service and Debug Interface
The SP3232EBEA-L/TR is appropriate for an embedded platform that needs an RS-232 service port for legacy programming, diagnostic, or configuration equipment. The 3 V to 5.5 V supply range supports modern system rails, and the 16-SSOP package avoids the larger footprint of many older RS-232 transceivers. A 250 kbps link is normally sufficient for console traffic, while the 2/2 architecture can support more than one RS-232 signal relationship. Because service ports are often connected to unknown external cables, place the IC according to the manufacturer's reference layout and use the appropriate connector protection strategy without defeating the device's internal 15 kV ESD capability.
پێشنیارکراو
Networking and Telemetry Interface
The SP3232EBEA-L/TR can bridge a low-voltage network processor or telemetry controller to an RS-232 modem, radio interface, or diagnostic terminal. The two transmitters and two receivers support command, status, and data paths when the application requires more than a single serial function. With a 3 V to 5.5 V operating range and a 250 kbps maximum rate, the device fits many short-range telemetry links using standard RS-232 electrical levels. Maintain separation between the RS-232 side and sensitive RF, clock, or Ethernet circuitry, and use short, controlled routing between the transceiver and connector. The integrated charge pump simplifies the power section, but external ESD or surge protection may still be required near an exposed connector.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ SP3232EBEA-L/TR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | SP3232EET-L/TR | SP3232EEA-L/TR | SP3232ECN-L/TR | SP3232EHCY-L | MAX3232CAE |
|---|---|---|---|---|---|---|
| Brand | MaxLinear | MaxLinear | MaxLinear | MaxLinear | MaxLinear | Analog Devices |
| Package | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP |
جیاکەرەوە سەرەکییەکان
- High under-load data rate (بەراورد بەMAX3232CAE)
- Single-rail low-voltage operation (بەراورد بەMAX232AEPE)
- Integrated electrostatic-discharge protection (بەراورد بەSP3232EET-L/TR)
تێبینییەکانی دیزاین
Place the charge-pump capacitors directly beside the SP3232EBEA-L/TR pins identified in the manufacturer pin-description table and minimize the loop area between each capacitor and its associated device pin. The SP3232EB series requires only 0.1 µF capacitors in 3.3 V operation. Keep the RS-232 driver and receiver routes away from clocks, ADC inputs, and other high-impedance analog nodes to prevent charge-pump and cable transients from coupling into sensitive circuitry.
Treat the RS-232 connector side as a high-voltage, high-impedance environment even though the logic side operates from 3 V to 5.5 V. Route the driver outputs and receiver inputs according to the datasheet's reference layout, avoid long parallel runs with sensitive signals, and provide a clear return path. Place any connector protection network close to the connector so surge current is shunted before it propagates into the transceiver.
Do not treat the internal 15 kV ESD rating as a complete cable-surge protection strategy. Verify whether the external connector can encounter ±15 kV contact discharge, ±8 kV air discharge, or other system-level threats, and add protection when required. Also confirm UART logic levels, receiver thresholds, driver slew behavior, charge-pump capacitor type, and package orientation against the datasheet before production release.
Use short, controlled routing for the 250 kbps-capable RS-232 links and avoid unnecessary stubs, vias, and long parallel copper. RS-232 is a single-ended, unbalanced interface, so connector grounding and cable routing can influence noise immunity more than logic timing alone. If the board combines RS-232 with switching supplies or high-speed digital traffic, separate the connector-side current paths and verify signal integrity with the intended cable and enclosure arrangement.
زانیاری پابەندبوون
The -L ordering suffix is present in the MPN, but no specific compliance declaration was identified. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current manufacturer product documentation or the supplier's certificate for the purchased lot.