MAX3232EIDBG4 - Dual RS-232 Transceiver | Texas Instruments
MPN: MAX3232EIDBG4 ✓ چالاکMAX3232EIDBG4 گشتی
An RS-232 transceiver is an interface IC within the broader semiconductor and interface-controller hierarchy. It converts logic-level signals from an asynchronous communication controller into RS-232 line levels, while receiving and translating remote RS-232 signals back into logic levels. The MAX3232EIDBG4 supports both directions on one compact package, reducing board area compared with separate driver and receiver ICs.
The device operates from 3 V to 5.5 V, so it can be powered directly from common 3.3 V or 5 V systems. Its two line drivers and two receivers suit point-to-point serial links, including industrial controllers, POS terminals, data-acquisition equipment, and service interfaces. The integrated dual charge-pump generates the positive and negative voltage levels required by RS-232 without a separate supply.
The MAX3232E family is designed to meet TIA/EIA-232-F requirements. According to the manufacturer datasheet, the serial-port pins, including ground, provide ±15 kV IEC ESD protection pin to pin. This protection is valuable when cables connect the board to external equipment through uncontrolled connector environments. The improved MAX3232E is also described by Texas Instruments as a direct drop-in replacement for the original MAX3232.
Typical uses include RS-232 adapters for embedded processors, configuration links on industrial automation equipment, instrument-control ports, and legacy peripheral connections. The 3 V to 5.5 V operating range makes the interface suitable for both 5 V industrial systems and modern 3.3 V controller platforms.
Place the charge-pump capacitors and the interface bypass capacitor close to their designated pins, and route the exposed connector-side signals away from sensitive clock and analog traces. Confirm polarity and signal direction at the RS-232 connector because the logic-side and line-side pin functions are not interchangeable.
This page organizes the electrical limits, package information, replacement options, comparison parameters, and practical layout guidance needed to evaluate the MAX3232EIDBG4 before integrating it into an RS-232 interface design.
جێگرەوەکانی جێگۆڕکێ بۆ MAX3232EIDBG4 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3232EIDBG4 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە ESD Protection, Package, Interface Standard, Product Type.
MAX3232EIDBR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3223EIDBG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX3232EIDBG4 تایبەتمەندییەکان
| Product Type | RS-232 line driver/receiver transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | 3 V to 5.5 V |
| Interface Standard | TIA/EIA-232-F |
| ESD Protection | ±15 kV IEC on serial-port pins, including GND |
| Charge-Pump Architecture | Dual charge pump |
| پاکێج | 16-SSOP, 5.30 mm width |
| جۆری دامەزراندن | Surface mount |
| Shipping Packaging | Tube |
| Lead-Free Status | Lead free |
ڕێنمایی ڕێکخستنی پینی MAX3232EIDBG4 16-ssop, 5.30 mm width
ڕێکخستنی پین بۆ MAX3232EIDBG4 (پاکێجی 16-ssop, 5.30 mm width). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3232EIDBG4.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX3232EIDBG4 گونجاوە بۆ 6 بەکارھێنانs: Industrial Controller Serial Interface, Point-of-Sale Terminal Connection, Data-Acquisition Instrument Port, Embedded Service and Configuration Port, Legacy Peripheral Retrofit, Communication Port with Cable Exposure.
Industrial Controller Serial Interface
The MAX3232EIDBG4 fits a controller board that must communicate through an RS-232 port while operating from a 3.3 V or 5 V rail. Its two drivers and two receivers provide two bidirectional RS-232 channels, and the integrated dual charge pump generates the required positive and negative line voltages. The ±15 kV IEC protection on serial-port pins is particularly useful where the connector is cable-accessible. Placement close to the RS-232 connector can reduce susceptibility to external noise, although the charge-pump and bypass capacitors still need short, direct return paths.
پێشنیارکراو
Point-of-Sale Terminal Connection
A point-of-sale terminal or peripheral can use the MAX3232EIDBG4 to bridge a low-voltage processor to a legacy RS-232 equipment port. The 3 V to 5.5 V supply range supports modern embedded platforms, while two drivers and two receivers suit equipment with more than one RS-232 signal path. The compact 16-SSOP footprint saves board area, and the integrated charge pump eliminates a separate bipolar voltage source. Designers should place the interface IC near the connector and provide chassis or signal-ground strategy appropriate to the installation.
پێشنیارکراو
Data-Acquisition Instrument Port
The MAX3232EIDBG4 is appropriate for laboratory and industrial data-acquisition equipment that must exchange serial commands with a computer or controller. Two receivers allow two incoming RS-232 signals to be monitored, and two drivers support command and control transmission. Operating from 3.3 V simplifies integration with modern instrument processors, and the specified ±15 kV IEC protection improves robustness at an exposed connector. Layout should keep line-side traces short and separate from sensitive sensor or reference circuitry to minimize coupling.
پێشنیارکراو
Embedded Service and Configuration Port
The MAX3232EIDBG4 can provide a service or configuration channel on embedded industrial equipment without requiring a separate RS-232 transceiver. A system processor operating at 3.3 V can communicate through the device without generating RS-232 voltages externally. Two drivers and receivers provide flexible signal allocation for configuration, diagnostics, or dual-port equipment. Because a service connector is often connected by long or field-installed cables, maintain the specified ESD-protection connection and consider a protective network coordinated with the enclosure and ground system.
پێشنیارکراو
Legacy Peripheral Retrofit
The MAX3232EIDBG4 allows a modern control board to retain compatibility with older RS-232 peripherals that still use conventional TIA/EIA-232 signal levels. Its 3 V to 5.5 V operation bridges the supply-voltage gap between a new controller and a legacy port, while the internal charge pump provides the required bipolar line voltages. The 16-SSOP package simplifies board-space constraints. Before retrofitting, verify connector pin numbering, signal direction, ground reference, and whether the peripheral uses hardware handshaking or only transmit and receive signals.
پێشنیارکراو
Communication Port with Cable Exposure
A communications board with a user-accessible RS-232 connector can benefit from the MAX3232EIDBG4 because its serial-port pins provide ±15 kV IEC ESD protection. The protection is intended for connector-facing connections, including the ground path, and is valuable in industrial and commercial environments where cables may be inserted or removed during service. The device still requires careful charge-pump capacitor placement and a low-impedance supply return. Additional system-level grounding and enclosure design may be needed for severe industrial environments.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX3232EIDBG4 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX3232EIDBR | MAX3223EIDBG4 |
|---|---|---|---|
| Package | 16-SSOP, 5.30 mm width | 16-SSOP | 16-SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | RS-232 transceiver | RS-232 transceiver | Multichannel line driver/receiver |
| ESD Protection | ±15 kV IEC pin to pin | ±15 kV IEC pin to pin | ESD-protected RS-232 interface |
| Orderable Configuration | MAX3232EIDBG4 | MAX3232EIDBR | MAX3223EIDBG4 |
جیاکەرەوە سەرەکییەکان
- Integrated dual-channel RS-232 interface (بەراورد بەMAX3223EIDBG4)
- Single-supply 3.3 V operation (بەراورد بەMAX3232EIDBR)
- Connector-side ESD protection (بەراورد بەMAX3232EIDBR)
تێبینییەکانی دیزاین
Place the charge-pump capacitors and supply-bypass capacitor directly beside their associated MAX3232EIDBG4 pins, using the shortest possible traces and solid ground-plane connections. Keep the RS-232 connector-side traces away from sensitive clock, ADC, and reference paths. The charge-pump node can couple energy into nearby circuitry, so avoid routing it beneath sensitive traces where practical and preserve the component placement shown in the manufacturer application diagram.
Do not interchange logic-side pins with RS-232 line-side pins during PCB design. A line-driver output connects to the external driver input, while a receiver input accepts an external RS-232 signal. Verify connector DTE/DCE orientation, TX and RX mapping, ground selection, and any hardware handshake lines before fabrication. Also confirm that the selected 16-SSOP footprint uses the correct 5.30 mm body width and lead pitch.
RS-232 cables can conduct external noise and ESD events into the board. Keep connector-side routing compact, provide a direct return path, and coordinate the interface protection with the connector and chassis strategy. The specified ±15 kV IEC protection covers the relevant serial-port pins, but it does not replace proper signal-grounding, enclosure design, or validation of the completed cable interface.
زانیاری پابەندبوون
The component listing identifies the MAX3232EIDBG4 as lead-free. No definitive RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was identified in the available technical information.