SP3232EHET-L - 3.3V 460kbps RS-232 Transceiver | MaxLinear
MPN: SP3232EHET-L ✓ چالاکSP3232EHET-L گشتی
An RS-232 transceiver is a level-shifting interface IC that converts logic-level signals from a host or controller into RS-232-compatible levels, while converting incoming RS-232 signals back into digital logic levels. In the interface hierarchy, SP3232EHET-L is a serial transceiver, an RS-232 transceiver, a line-driver and receiver pair, and ultimately a semiconductor interface device used between digital equipment and a cable-based serial port.
The SP3232EH is designed around a compact 2/2 transceiver arrangement. Its 3.3 V supply operation reduces the logic-side voltage required by portable electronics, and its 460 kbps maximum signaling rate is suitable for moderate-speed serial links. The 16-SOIC format supports conventional surface-mount assembly while keeping the interface small enough for embedded control boards. Charge-pump circuitry and internal voltage levels allow the device to implement RS-232 signaling from a low-voltage supply.
This transceiver architecture is intended for portable or hand-held equipment, including computers, terminals, and embedded serial-port systems. Two driver channels support two outgoing RS-232 signals, while two receiver channels accept two incoming signals. This arrangement suits equipment that needs more than one serial direction but does not require the channel count of larger multi-driver RS-232 families.
Typical uses include point-of-sale terminals, portable diagnostic equipment, industrial controllers, and peripheral connection systems. In these applications, the key design considerations are the 3.3 V supply requirement, the 460 kbps data-rate ceiling, the 16-pin SOIC footprint, and the proper implementation of RS-232 cable protection. External protection may be required when a connected cable is exposed to electrostatic discharge or other industrial transients.
Place bypass capacitors close to the supply and ground pins, route transceiver outputs and inputs away from sensitive clock or reference nets, and confirm that the host-side logic levels match the 3.3 V interface. Review the manufacturer pin-description and connection tables before assigning PCB tracks. Use the Request a Quote form on this page for current commercial availability, quantity requirements, and lead-time confirmation.
This product page combines the manufacturer family description with distributor package and interface information, a pin-compatible replacement comparison, and practical PCB and protection guidance. It is intended to help engineers qualify the SP3232EHET-L quickly while still checking the exact ordering suffix against their mechanical and production requirements.
جێگرەوەکانی جێگۆڕکێ بۆ SP3232EHET-L — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ SP3232EHET-L (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Voltage Range, Maximum Data Rate, Product Type.
SP3232EBEN-L/TR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →SP3232EHCA-L/TR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ST3232BDR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →SP3232EHET-L تایبەتمەندییەکان
| Product Type | RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Interface Standard | RS-232 |
| ڤۆڵتیەی دابینکردن | 3.3 V |
| Maximum Data Rate | 460 kbps |
| پاکێج | 16-pin SOIC |
| جۆری دامەزراندن | Surface mount |
| Logic Direction | Dual 2/2 transceiver |
ڕێنمایی ڕێکخستنی پینی SP3232EHET-L 16-pin soic
ڕێکخستنی پین بۆ SP3232EHET-L (پاکێجی 16-pin soic). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ SP3232EHET-L.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
SP3232EHET-L گونجاوە بۆ 6 بەکارھێنانs: Portable RS-232 Serial Adapter, Point-of-Sale Terminal Interface, Industrial Diagnostic Equipment, Embedded Data Acquisition Controller, Printer and Peripheral Connectivity, Communication Adapter.
Portable RS-232 Serial Adapter
The SP3232EHET-L fits portable serial adapters because it operates from 3.3 V and provides two transmitters and two receivers in a 16-pin SOIC package. It can convert a host UART's logic levels to RS-232 cable signals and return incoming data to the host without requiring a separate driver IC. Its maximum documented rate of 460 kbps is appropriate for configuration transfer, diagnostics, and short command exchanges. Designers should confirm the connector mapping and place cable-side transient protection between the external RS-232 lines and the transceiver pins.
پێشنیارکراو
Point-of-Sale Terminal Interface
The SP3232EHET-L provides a compact interface between a point-of-sale controller and RS-232 peripherals. Its two-driver and two-receiver arrangement supports bidirectional communication without requiring four separate line-interface components, while the 3.3 V supply matches low-voltage embedded controllers. The 460 kbps ceiling covers typical peripheral command and transaction traffic. Keep the ground return continuous, separate logic-side and cable-side return currents where practical, and verify the peripheral's connector pinout before energizing the adapter.
پێشنیارکراو
Industrial Diagnostic Equipment
The SP3232EHET-L is suitable for industrial diagnostic equipment that communicates through legacy RS-232 ports while operating from a 3.3 V control platform. Its 2/2 topology allows simultaneous command output and status reception, and the 460 kbps rate supports common service and diagnostic protocols. The primary design tradeoff is that a 16-pin SOIC does not eliminate the need for external ESD protection on externally accessible cable pins. Use short, well-routed traces and confirm receiver thresholds against the connected equipment.
پێشنیارکراو
Embedded Data Acquisition Controller
The SP3232EHET-L can serve as the RS-232 communications section of an embedded data-acquisition controller. Two driver outputs can address equipment that accepts commands and requests, while two receiver inputs collect responses or status signals. The 3.3 V operation integrates cleanly with modern controller logic, and 460 kbps provides ample margin for ordinary measurement commands. Avoid routing the cable-side outputs next to high-impedance sensor inputs, and confirm that the host software expects the electrical and logical behavior of a standard RS-232 port.
پێشنیارکراو
Printer and Peripheral Connectivity
The SP3232EHET-L can connect a compact embedded system to an RS-232 printer, scanner, or service peripheral. The two transmitters and two receivers provide useful channel flexibility for command, data, and status paths, while 3.3 V operation suits battery- and power-constrained equipment. The 460 kbps limit is well above the throughput of many legacy peripherals, making protocol overhead more likely to determine practical performance. Confirm that the host UART voltage, flow-control method, and connector wiring agree with the peripheral documentation.
پێشنیارکراو
Communication Adapter
The SP3232EHET-L is a practical building block for a communication adapter that bridges modern low-voltage logic and older RS-232 equipment. Its dual-driver and dual-receiver configuration allows two independent outbound signals and two inbound signals, while the 16-pin SOIC package supports automated board assembly. At 460 kbps, the interface handles moderate-rate control channels but does not target high-speed differential buses. Validate pin orientation, supply bypassing, and external protection before deploying the adapter in a field environment.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ SP3232EHET-L — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | SP3232EBEN-L/TR | SP3232EH | ST3232BDR |
|---|---|---|---|---|
| Brand | MaxLinear | MaxLinear | MaxLinear | STMicroelectronics |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Transmitter Count | 2 | 2 | 2 | 2 |
| Receiver Count | 2 | 2 | 2 | 2 |
| Interface | RS-232 | RS-232 | RS-232 | RS-232 |
| Ordering Suffix | -L | -L/TR | Base family designation | BDR ordering suffix |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
جیاکەرەوە سەرەکییەکان
- Provides a two-driver and two-receiver RS-232 interface in one 16-pin SOIC device (بەراورد بەST3232BDR)
- Operates from a 3.3 V supply for low-voltage embedded designs (بەراورد بەSP3232EH)
- Supports a 460 kbps maximum serial data rate (بەراورد بەSP3232EBEN-L/TR)
تێبینییەکانی دیزاین
Use the manufacturer pin-description table to assign the 16-SOIC footprint and confirm pin-one orientation against the package marking. Place the supply bypass capacitor adjacent to the power and ground pins, provide a low-impedance ground plane, and avoid routing receiver inputs beneath noisy RS-232 driver outputs. A solid ground reference is important because the transceiver converts cable-level signals into logic levels referenced to the board ground.
Do not assume that every 16-pin RS-232 IC is electrically or functionally identical. Confirm the driver outputs, receiver inputs, supply pins, enable functions, and voltage ratings against the manufacturer pin table before substituting SP3232EBEN-L/TR, SP3232EH, or ST3232BDR. The package match is necessary for assembly, but it does not by itself prove that the UART logic levels, shutdown behavior, and protection characteristics are unchanged.
Keep the 3.3 V supply loop compact and place the bypass capacitor at the transceiver rather than at a remote power entry point. Route RS-232 outputs and inputs as a compact signal group with an adjacent ground return where practical, and keep them separated from clocks, ADC inputs, and sensitive sensor nodes. For externally accessible cables, evaluate a dedicated transient-protection network so that ESD events are clamped before reaching the transceiver pins.
زانیاری پابەندبوون
The -L suffix denotes a lead-free ordering configuration. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from the manufacturer's current declaration for the exact ordering configuration.