MaxLinear

SP3232EHET-L - 3.3V 460kbps RS-232 Transceiver | MaxLinear

N.º da peça: SP3232EHET-L ✓ Ativo
3.3 V Vdss 16-pin SOIC Package
MOQ: 1 |

SP3232EHET-L Visão geral

MaxLinear SP3232EHET-L is a 3.3 V dual RS-232 transceiver with two drivers and two receivers, supporting data rates up to 460 kbps in a 16-pin SOIC package. It combines bidirectional serial-interface conversion with low-voltage operation for portable and embedded systems. The -L suffix identifies the lead-free ordering configuration, while the -TR portion is used by tape-and-reel order codes.

An RS-232 transceiver is a level-shifting interface IC that converts logic-level signals from a host or controller into RS-232-compatible levels, while converting incoming RS-232 signals back into digital logic levels. In the interface hierarchy, SP3232EHET-L is a serial transceiver, an RS-232 transceiver, a line-driver and receiver pair, and ultimately a semiconductor interface device used between digital equipment and a cable-based serial port.

The SP3232EH is designed around a compact 2/2 transceiver arrangement. Its 3.3 V supply operation reduces the logic-side voltage required by portable electronics, and its 460 kbps maximum signaling rate is suitable for moderate-speed serial links. The 16-SOIC format supports conventional surface-mount assembly while keeping the interface small enough for embedded control boards. Charge-pump circuitry and internal voltage levels allow the device to implement RS-232 signaling from a low-voltage supply.

This transceiver architecture is intended for portable or hand-held equipment, including computers, terminals, and embedded serial-port systems. Two driver channels support two outgoing RS-232 signals, while two receiver channels accept two incoming signals. This arrangement suits equipment that needs more than one serial direction but does not require the channel count of larger multi-driver RS-232 families.

Typical uses include point-of-sale terminals, portable diagnostic equipment, industrial controllers, and peripheral connection systems. In these applications, the key design considerations are the 3.3 V supply requirement, the 460 kbps data-rate ceiling, the 16-pin SOIC footprint, and the proper implementation of RS-232 cable protection. External protection may be required when a connected cable is exposed to electrostatic discharge or other industrial transients.

Place bypass capacitors close to the supply and ground pins, route transceiver outputs and inputs away from sensitive clock or reference nets, and confirm that the host-side logic levels match the 3.3 V interface. Review the manufacturer pin-description and connection tables before assigning PCB tracks. Use the Request a Quote form on this page for current commercial availability, quantity requirements, and lead-time confirmation.

This product page combines the manufacturer family description with distributor package and interface information, a pin-compatible replacement comparison, and practical PCB and protection guidance. It is intended to help engineers qualify the SP3232EHET-L quickly while still checking the exact ordering suffix against their mechanical and production requirements.

Alternativas drop-in para SP3232EHET-L — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com SP3232EHET-L (mesmo formato e footprint) — diferindo em Package, Supply Voltage Range, Maximum Data Rate, Product Type.

MaxLinear
Supply Voltage Range: 3.0V to 5.5V
Maximum Data Rate: 250kbps
Product Type: RS-232 transceiver interface IC
MaxLinear
Package: 16-SSOP, 5.30 mm width
Supply Voltage Range: 3 V to 5.5 V
STMicroelectronics
Package: SOIC-16
Supply Voltage Range: 3.0 V to 5.5 V
Comparar com SP3232EHET-L →

SP3232EBEN-L/TR

✅ Drop-In
MaxLinear
📦 16-SOIC
RS-232 transceiver interface IC · 2 channels · 2 channels · 3.0V to 5.5V · 250kbps · 0.3mA · -40°C to +85°C · 16-pin SOIC

Consulte o preço

Ver ficha técnica →

SP3232EHCA-L/TR

✅ Drop-In
MaxLinear
📦 16-SOIC
RS-232 transceiver · 2 · 2 · 2/2 full-duplex · 3 V to 5.5 V · 2.7 V · 460 kbps · RS-232

Consulte o preço

Ver ficha técnica →

ST3232BDR

✅ Drop-In
STMicroelectronics
📦 16-SOIC
2 · 2 · 3.0 V to 5.5 V · 400 kbps · ±15 kV HBM · 10 kΩ · 1 µA · 0.1 µF

Consulte o preço

Ver ficha técnica →

SP3232EHET-L Especificações

Product Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Interface Standard RS-232
Tensão de alimentação 3.3 V
Maximum Data Rate 460 kbps
Encapsulamento 16-pin SOIC
Tipo de montagem Surface mount
Logic Direction Dual 2/2 transceiver

Guia de Configuração de Pinos do SP3232EHET-L 16-pin soic

Configuração de pinos para SP3232EHET-L (pacote 16-pin soic). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 16-pin soic para SP3232EHET-L

Nenhum dado detalhado de pinagem disponível para SP3232EHET-L.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SP3232EHET-L é adequado para 6 aplicaçãos: Portable RS-232 Serial Adapter, Point-of-Sale Terminal Interface, Industrial Diagnostic Equipment, Embedded Data Acquisition Controller, Printer and Peripheral Connectivity, Communication Adapter.

📱

Portable RS-232 Serial Adapter

The SP3232EHET-L fits portable serial adapters because it operates from 3.3 V and provides two transmitters and two receivers in a 16-pin SOIC package. It can convert a host UART's logic levels to RS-232 cable signals and return incoming data to the host without requiring a separate driver IC. Its maximum documented rate of 460 kbps is appropriate for configuration transfer, diagnostics, and short command exchanges. Designers should confirm the connector mapping and place cable-side transient protection between the external RS-232 lines and the transceiver pins.

🏭

Point-of-Sale Terminal Interface

The SP3232EHET-L provides a compact interface between a point-of-sale controller and RS-232 peripherals. Its two-driver and two-receiver arrangement supports bidirectional communication without requiring four separate line-interface components, while the 3.3 V supply matches low-voltage embedded controllers. The 460 kbps ceiling covers typical peripheral command and transaction traffic. Keep the ground return continuous, separate logic-side and cable-side return currents where practical, and verify the peripheral's connector pinout before energizing the adapter.

🔧

Industrial Diagnostic Equipment

The SP3232EHET-L is suitable for industrial diagnostic equipment that communicates through legacy RS-232 ports while operating from a 3.3 V control platform. Its 2/2 topology allows simultaneous command output and status reception, and the 460 kbps rate supports common service and diagnostic protocols. The primary design tradeoff is that a 16-pin SOIC does not eliminate the need for external ESD protection on externally accessible cable pins. Use short, well-routed traces and confirm receiver thresholds against the connected equipment.

📊

Embedded Data Acquisition Controller

The SP3232EHET-L can serve as the RS-232 communications section of an embedded data-acquisition controller. Two driver outputs can address equipment that accepts commands and requests, while two receiver inputs collect responses or status signals. The 3.3 V operation integrates cleanly with modern controller logic, and 460 kbps provides ample margin for ordinary measurement commands. Avoid routing the cable-side outputs next to high-impedance sensor inputs, and confirm that the host software expects the electrical and logical behavior of a standard RS-232 port.

🖨️

Printer and Peripheral Connectivity

The SP3232EHET-L can connect a compact embedded system to an RS-232 printer, scanner, or service peripheral. The two transmitters and two receivers provide useful channel flexibility for command, data, and status paths, while 3.3 V operation suits battery- and power-constrained equipment. The 460 kbps limit is well above the throughput of many legacy peripherals, making protocol overhead more likely to determine practical performance. Confirm that the host UART voltage, flow-control method, and connector wiring agree with the peripheral documentation.

🌐

Communication Adapter

The SP3232EHET-L is a practical building block for a communication adapter that bridges modern low-voltage logic and older RS-232 equipment. Its dual-driver and dual-receiver configuration allows two independent outbound signals and two inbound signals, while the 16-pin SOIC package supports automated board assembly. At 460 kbps, the interface handles moderate-rate control channels but does not target high-speed differential buses. Validate pin orientation, supply bypassing, and external protection before deploying the adapter in a field environment.

What are the key specifications of SP3232EHET-L that engineers should know?
The SP3232EHET-L is a 3.3 V, 460 kbps RS-232 transceiver with two drivers and two receivers in a 16-pin SOIC package. According to the MaxLinear SP3232EH family page, the device is intended for portable and hand-held equipment. Its four-channel 2/2 arrangement supports two outbound and two inbound serial signals, while its low-voltage operation is useful where the host logic operates from a 3.3 V rail. The package, channel count, and maximum data rate are the principal checks for PCB and firmware compatibility.
What is the operating voltage of SP3232EHET-L?
The SP3232EHET-L operates from a 3.3 V supply. Distributor product information identifies it as a 3.3 V RS-232 interface IC, while the MaxLinear family page describes the SP3232EH as a low-voltage transceiver for portable equipment. The supply rails and adjacent host devices should therefore share compatible logic levels. When replacing an older 5 V RS-232 implementation, verify that the host-side logic thresholds and serial transceiver input arrangement remain suitable.
How fast can SP3232EHET-L transmit RS-232 data?
The SP3232EHET-L supports RS-232 signaling up to 460 kbps. This figure comes from the MaxLinear distributor product listing for the exact device and provides the upper data-rate reference for cable and firmware design. The usable command throughput will also depend on the host UART, protocol overhead, character framing, and the cable. Operating close to the maximum rate can increase sensitivity to capacitance, reflections, and poor cable quality.
Where can I find the SP3232EHET-L pinout and datasheet?
The manufacturer SP3232EH product page is the starting point for the family datasheet and exact pin assignments. The product listing identifies the device as a 16-pin SOIC with two drivers and two receivers. Use the manufacturer pin-description table when assigning supply, ground, driver-output, receiver-input, and control connections. The package diagram on this page is useful for footprint orientation, but the manufacturer table remains the controlling source for each numbered pin.
What can replace SP3232EHET-L in an existing PCB design?
The SP3232EBEN-L/TR is a documented same-family comparison candidate for an SP3232EHET-L/TR board, while the SP3232EH family page identifies the base transceiver used by the target. Before selecting either part, verify its exact 16-SOIC pin assignment, supply range, and electrical ratings against the manufacturer datasheet. A replacement should match the PCB footprint and pin functions rather than merely share the RS-232 protocol and a 16-pin package designation.
Is SP3232EHET-L the same as SP3232EBEN-L/TR?
No exact electrical equivalence should be assumed. SP3232EBEN-L/TR is directly presented as a specification comparison against SP3232EHET-L/TR, making it a useful same-family replacement candidate, but the two suffixes may represent different qualification or feature options. Compare their pin descriptions, supply voltage, data rate, and protection ratings before substitution. For a production change, record the manufacturer comparison and approve the selected part through your normal qualification process.
SP3232EHET-L vs ST3232BDR - which is better for a 16-SOIC design?
The SP3232EHET-L is preferable when the design specifically requires its documented 3.3 V operation, 460 kbps rate, and two-driver/two-receiver configuration. The ST3232BDR is a separately documented RS-232 comparison candidate, but pin and parameter equivalence must be confirmed before using it as a drop-in substitute. Review both manufacturer pin tables and check the host logic levels. Do not select either solely from the shared RS-232 function.
When should I choose SP3232EHET-L over another RS-232 transceiver?
Choose SP3232EHET-L when the board needs two RS-232 transmitters, two receivers, a 3.3 V supply, and a 16-pin SOIC footprint. It is particularly suitable for portable or hand-held equipment that cannot conveniently use a 5 V-only interface. An alternative should be considered when its documented supply range, channel count, data rate, or pinout offers a clearer fit. The strongest replacement has matching pin functions and comparable operating limits.
Is SP3232EHET-L suitable for a portable serial adapter?
The SP3232EHET-L is suitable for a portable serial adapter because MaxLinear describes the SP3232EH family for portable and hand-held applications, and the device operates from 3.3 V. Its 460 kbps rate supports typical control and diagnostic links without requiring a high-speed line driver. The adapter should still include suitable cable-side transient protection and verify connector pin assignments before connecting it to an unprotected RS-232 port.
Where to buy SP3232EHET-L online?
Use the Request a Quote form on this page to request current SP3232EHET-L availability, quantity pricing, and lead time from XAIPART. The form allows buyers to specify the required -L ordering configuration and packaging format without relying on stale catalog pricing. When preparing a purchase, confirm whether the board requires the base SP3232EHET-L designation or a -TR tape-and-reel suffix and attach the required delivery date.
What is the price of SP3232EHET-L?
Current SP3232EHET-L pricing depends on quantity, exact suffix, and packaging, so buyers should use the Request a Quote form on this page for a current offer. The quote form is the appropriate route for checking unit breaks and production quantities without inserting a price that may have expired. Include the required reel or tray quantity, destination, target date, and any automotive or sourcing documentation requirements in the request.
What is the lead time for SP3232EHET-L?
Request the current SP3232EHET-L lead time through the Request a Quote form on this page. Lead time can change with the exact ordering suffix, package format, order quantity, and production schedule. For schedule planning, state the required delivery date and annual usage, and ask for confirmation of the package quantity per reel. This provides a traceable commercial response without relying on a static availability claim.
Is SP3232EHET-L in stock?
Use the Request a Quote form on this page to request current stock confirmation for SP3232EHET-L and the exact -L configuration needed for production. Availability should be confirmed against the requested quantity and packaging format. Distributor search pages may aggregate multiple ordering configurations, so a listing for a related suffix does not automatically establish stock for the target MPN.
What are the key RS-232 design considerations for SP3232EHET-L?
The main considerations are power integrity, signal routing, and cable-side protection. The 3.3 V supply needs local bypass capacitance, and the 16-SOIC footprint requires correct pin-one orientation. Keep receiver inputs and driver outputs away from sensitive analog or clock traces, provide a continuous ground reference, and follow the manufacturer connection guidance. Add suitable RS-232 transient protection when the cable can contact an unknown external system.
What does the SP3232EHET-L -L ordering suffix mean?
The -L designation identifies a lead-free ordering configuration for SP3232EHET-L, while the separately listed SP3232EHET-L/TR identifies the tape-and-reel form of that configuration. Ordering documents should retain the complete manufacturer suffix and confirm the assembly packaging required by the production line. Do not interchange the base MPN and -TR code without confirming reel orientation, quantity, and the manufacturer's approved ordering nomenclature.
How does SP3232EHET-L support low-voltage serial interfaces?
The SP3232EHET-L combines a 3.3 V supply requirement with RS-232 line-driver and receiver functions. MaxLinear positions the SP3232EH family for portable and hand-held systems, where lower-voltage logic reduces the burden on the host power budget. The chip still provides the bipolar voltage levels required by RS-232 through its internal interface architecture. The exact internal charge-pump and protection implementation should be confirmed from the manufacturer datasheet.

Dados de referência de engenharia para SP3232EHET-L — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose SP3232EHET-L when the board specifically uses a 3.3 V supply and requires two RS-232 transmitters and two receivers in a 16-pin SOIC footprint. Its documented 460 kbps rate is suitable for portable computers, terminals, diagnostic equipment, and peripheral adapters. Consider SP3232EBEN-L/TR when its comparison-specific electrical or qualification characteristics provide a better fit, but verify its pin functions and operating limits before releasing a PCB change. SP3232EH is appropriate when the base family ordering configuration satisfies the product's assembly requirements. ST3232BDR is a cross-brand candidate for evaluation when a second source is valuable, but confirm supply voltage, pin mapping, and timing rather than relying on package similarity alone. For every candidate, prioritize exact pin compatibility, supply range, channel behavior, and external cable-protection requirements.

Comparação com alternativas

Parâmetro Este produto SP3232EBEN-L/TR SP3232EH ST3232BDR
Brand MaxLinear MaxLinear MaxLinear STMicroelectronics
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Transmitter Count 2 2 2 2
Receiver Count 2 2 2 2
Interface RS-232 RS-232 RS-232 RS-232
Ordering Suffix -L -L/TR Base family designation BDR ordering suffix
Mounting Type Surface mount Surface mount Surface mount Surface mount

Principais diferenciais

  • Provides a two-driver and two-receiver RS-232 interface in one 16-pin SOIC device (vs ST3232BDR)
  • Operates from a 3.3 V supply for low-voltage embedded designs (vs SP3232EH)
  • Supports a 460 kbps maximum serial data rate (vs SP3232EBEN-L/TR)

Notas de projeto

Use the manufacturer pin-description table to assign the 16-SOIC footprint and confirm pin-one orientation against the package marking. Place the supply bypass capacitor adjacent to the power and ground pins, provide a low-impedance ground plane, and avoid routing receiver inputs beneath noisy RS-232 driver outputs. A solid ground reference is important because the transceiver converts cable-level signals into logic levels referenced to the board ground.

Do not assume that every 16-pin RS-232 IC is electrically or functionally identical. Confirm the driver outputs, receiver inputs, supply pins, enable functions, and voltage ratings against the manufacturer pin table before substituting SP3232EBEN-L/TR, SP3232EH, or ST3232BDR. The package match is necessary for assembly, but it does not by itself prove that the UART logic levels, shutdown behavior, and protection characteristics are unchanged.

Keep the 3.3 V supply loop compact and place the bypass capacitor at the transceiver rather than at a remote power entry point. Route RS-232 outputs and inputs as a compact signal group with an adjacent ground return where practical, and keep them separated from clocks, ADC inputs, and sensitive sensor nodes. For externally accessible cables, evaluate a dedicated transient-protection network so that ESD events are clamped before reaching the transceiver pins.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Yes
Sem halogênios
Unknown
Minerais de conflito
Unknown

The -L suffix denotes a lead-free ordering configuration. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from the manufacturer's current declaration for the exact ordering configuration.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

SP3232EHET-L datasheet SP3232EHET-L pinout SP3232EHET-L datasheet pdf SP3232EHET-L equivalent SP3232EHET-L replacement SP3232EHET-L cross reference SP3232EHET-L vs ST3232BDR SP3232EHET-L footprint SP3232EHET-L 3.3V SP3232EHET-L 460kbps SP3232EHET-L price SP3232EHET-L stock MaxLinear SP3232EHET-L SP3232EHET-L portable serial adapter SP3232EHET-L schematic

Componentes & termos relacionados

MaxLinear SP3232EHET-L SP3232EHET-L/TR SP3232EBEN-L/TR SP3232EH ST3232BDR MAX3221IPWR RS-232 RS-232 transceiver serial transceiver interface IC line driver line receiver semiconductor 3.3 V logic 460 kbps 16-pin SOIC SOIC family surface-mount technology UART electrostatic discharge protection point-of-sale terminal portable electronics industrial diagnostic equipment EMI
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ