STM32F417IGH6 - 168MHz Cortex-M4 MCU | STMicroelectronics
MPN: STM32F417IGH6 ✓ چالاکSTM32F417IGH6 گشتی
A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces into one component. The STM32F4 family sits within the hierarchy of embedded controller, 32-bit RISC microcontroller, Arm Cortex-M processor, and embedded semiconductor. It is used where deterministic control, real-time communication, graphical data handling, and multiple peripheral functions must operate within a compact device.
The STM32F417IGH6 provides up to 168 MHz processing performance, 1 MB of flash storage, and 192 KB of SRAM. Its 140 I/O pins provide access to communications, timing, debugging, and application-specific functions. Published specifications identify Ethernet MAC and camera-interface capabilities, making the device applicable to connected industrial equipment, imaging systems, and network-aware embedded controllers.
The Cortex-M4 processor core uses a 32-bit architecture and supports the Thumb instruction set. At its maximum 168 MHz operating frequency, the MCU is designed for computationally demanding control tasks that need more memory and peripheral capacity than entry-level Cortex-M devices. Flash memory retains firmware while SRAM supports working data, stack operations, buffers, and protocol stacks during execution.
Typical uses include Ethernet-connected industrial controls, camera-based monitoring equipment, data acquisition units, motion and automation controllers, and compact embedded gateways. The large pin count permits simultaneous use of several communications and peripheral functions, while the 1 MB flash capacity can accommodate networking firmware, application code, and configuration data.
PCB design must account for the 201-UFBGA footprint, high pin density, multilayer escape routing, power integrity, and thermal performance. Place decoupling capacitors close to supply pins, route high-speed signals with continuous reference planes, and follow the manufacturer's recommended land pattern and pin-definition tables. Confirm the exact pin functions and alternate-function assignments before finalizing the schematic and layout.
This product overview combines the verified electrical, memory, package, and interface characteristics with practical replacement guidance, application analysis, and design considerations. It helps engineers distinguish exact-ordering-code options from broader STM32F4 alternatives and identify whether a candidate is suitable for a new design or only for an existing board revision.
جێگرەوەکانی جێگۆڕکێ بۆ STM32F417IGH6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32F417IGH6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Flash Memory, Product Type, Core, Camera Interface.
STM32F407IGH6
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F407IGH7
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F427IGH6TR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32F417IGH6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 168 MHz |
| Program Memory Size | 1 MB (1M x 8) |
| RAM Size | 192 KB (192K x 8) |
| Number of I/O Pins | 140 pins |
| پاکێج | 201-UFBGA (10 mm x 10 mm) |
| Ethernet Interface | Ethernet MAC |
| Camera Interface | Supported |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| جۆری دامەزراندن | Surface mount |
| RoHS Compliance | Unknown |
| REACH Compliance | Unknown |
ڕێنمایی ڕێکخستنی پینی STM32F417IGH6 201-ufbga (10 mm x 10 mm)
ڕێکخستنی پین بۆ STM32F417IGH6 (پاکێجی 201-ufbga (10 mm x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32F417IGH6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32F417IGH6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Controller, Camera-Based Monitoring System, Industrial Automation Controller, High-Speed Data Acquisition Unit, Embedded Network Gateway, Test and Measurement Front End.
Industrial Ethernet Controller
The STM32F417IGH6 fits industrial Ethernet controllers because its Arm Cortex-M4 core operates up to 168 MHz and the device includes an Ethernet MAC alongside 1 MB of flash, 192 KB of SRAM, and 140 I/O pins. It can run a network protocol stack, coordinate real-time machine functions, and expose diagnostics through communications peripherals. A practical design uses the MCU with a compatible Ethernet PHY and suitable isolation or magnetic coupling where required. The large 201-UFBGA footprint provides extensive pin access but demands multilayer escape routing and careful power-plane design.
پێشنیارکراو
Camera-Based Monitoring System
The STM32F417IGH6 suits camera-based monitoring systems because it combines a 168 MHz Cortex-M4 processor, a camera interface, 140 I/O pins, and 192 KB of SRAM. It can coordinate sensor configuration, capture timing, image metadata, event handling, and network reporting while preserving space in the 1 MB flash partition for firmware and configuration. The practical benefit is consolidating control and communications in one device rather than using separate processors. Confirm the sensor's electrical interface, required pixel rate, DMA requirements, and exposure timing against the manufacturer specifications.
پێشنیارکراو
Industrial Automation Controller
The STM32F417IGH6 is well suited to industrial automation because its 168 MHz Cortex-M4 core supports responsive control logic, while 140 I/O pins expose multiple digital and peripheral connections. The 1 MB flash capacity accommodates control firmware, communication stacks, and configuration, and the 192 KB SRAM supports working buffers and real-time task data. It can coordinate sensors, actuators, motor-control signals, and supervisory communications in a compact control module. Design the PCB for clean separation of analog and digital paths, robust decoupling, and high-quality grounding under industrial noise conditions.
پێشنیارکراو
High-Speed Data Acquisition Unit
The STM32F417IGH6 fits high-speed data acquisition because its 168 MHz Cortex-M4 core can process samples and control peripherals while 192 KB of SRAM accommodates acquisition buffers. Its 12-bit ADC capability provides a defined conversion resolution, and the 140-pin package exposes the analog, digital, timing, and communication resources needed for a multichannel instrument. The 1 MB flash partition can hold acquisition software and configuration. Validate input bandwidth, trigger latency, DMA behavior, reference accuracy, and channel multiplexing against the manufacturer electrical specifications before setting the sampling architecture.
پێشنیارکراو
Embedded Network Gateway
The STM32F417IGH6 is appropriate for a compact embedded network gateway because it combines Ethernet MAC support with a 168 MHz Arm Cortex-M4 core, 1 MB of flash, and 192 KB of SRAM. It can terminate a local network connection, translate device data, maintain protocol state, and forward status information through another communications interface. Its 140 I/O pins allow connection of status signals, storage, and control peripherals without requiring a separate large microcontroller. Memory budgeting and protocol concurrency are the principal constraints, so confirm firmware growth and DMA requirements before finalizing gateway functions.
پێشنیارکراو
Test and Measurement Front End
The STM32F417IGH6 can serve as the control front end in compact test and measurement equipment because it combines a 168 MHz processor, 192 KB of SRAM, 140 I/O pins, and 12-bit conversion capability. The MCU can orchestrate instrument sequencing, acquire analog measurements, maintain calibration data, and communicate results to a host. Its 1 MB flash capacity is suitable for moderate firmware sizes but must be monitored when adding algorithms or interfaces. The dense UFBGA layout requires controlled impedance routing, solid ground planes, and carefully placed analog and digital decoupling.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32F417IGH6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32F407IGH6 | STM32F407IGH7 | STM32F427IGH6TR |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 201-UFBGA (10 mm x 10 mm) | 201-UFBGA (10 mm x 10 mm) | 201-UFBGA (10 mm x 10 mm) | 201-UFBGA (10 mm x 10 mm) |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
جیاکەرەوە سەرەکییەکان
- Specified combination of processor speed, memory, and I/O capacity (بەراورد بەSTM32F407IGH6)
- Network and imaging functions integrated in one controller (بەراورد بەSTM32F407IGH6)
- Large general-purpose memory allocation for embedded control (بەراورد بەSTM32F427IGH6TR)
تێبینییەکانی دیزاین
The 201-UFBGA footprint has 140 I/O positions and requires a multilayer board with short, controlled escape routing. Follow the manufacturer's land pattern, ball-pitch dimensions, and assembly guidelines exactly. Keep BGA escape tracks within the tolerance of the PCB and assembly process, use uninterrupted ground planes beneath signal escapes, and avoid long stubs between the MCU and supporting circuitry.
Place the required decoupling capacitors directly beside their associated power balls, with the shortest possible connection to the ground reference. Separate analog and digital supply paths where the design permits, and route high-current loads away from sensitive analog inputs. Confirm voltage limits, tolerance, startup sequencing, and capacitor stability requirements in the manufacturer electrical specifications before releasing the schematic.
The 201-UFBGA package concentrates heat dissipation through its underside and PCB copper. Use a multilayer board with a solid ground plane and thermal-via array beneath the device, then calculate the expected junction temperature from actual switching loss, ambient temperature, and the package's specified thermal resistance. Keep the MCU away from heat-generating components when enclosure temperature rises.
Clock, Ethernet, camera, and other high-speed interfaces require continuous reference planes, short return paths, and impedance-controlled PCB geometry. Use the manufacturer interface timing and layout guidance for each selected peripheral because signal integrity depends on actual trace lengths, load capacitance, edge rates, and board stack-up. Validate the finished layout with appropriate signal-integrity or compliance testing.
Do not treat a matching BGA outline as proof that an alternative MCU is a drop-in replacement. Check every ball assignment, power pin, ground pin, boot configuration, debug interface, clock pin, peripheral mapping, and exposed thermal requirement. Also compare the ordering suffix, temperature grade, flash size, SRAM capacity, and firmware support before changing the BOM.
زانیاری پابەندبوون
Compliance status cannot be confirmed from the listed technical information. Verify the current manufacturer declarations and product documentation before using the MCU in a regulated production design.