STM32G041K8T6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics
MPN: STM32G041K8T6 ✓ چالاکSTM32G041K8T6 گشتی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32G0 family sits within the broader hierarchy of embedded processor, microcontroller, and semiconductor products. Instead of relying on a discrete processor and separate interface chips, an STM32 device executes firmware, measures analog signals, controls timers and PWM outputs, and manages communications on a single integrated platform.
The STM32G041K8T6 features a 32-bit Arm Cortex-M0+ core, 64 KB of Flash for program storage, and 8 KB of RAM for runtime data. Its mixed-signal and timer-driven control positioning supports applications that need both digital processing and peripheral control. The 12-bit ADC capability and 30-channel indication associated with this device family suit sensor acquisition, while timer and PWM resources support motor, valve, lighting, and industrial actuator tasks.
The 64 MHz operating frequency provides a practical balance between processing throughput and power-conscious embedded control. Firmware can combine communication handling, control-loop execution, and peripheral servicing in one MCU. The 32-LQFP package provides 32 accessible peripheral pins and supports conventional surface-mount assembly, making the device practical for designs that need substantial I/O without moving to a very fine-pitch package.
Typical uses include compact motor controllers, digital potentiometer and dimming systems, sensor-interface nodes, small appliances, and embedded control boards. In a motor-control design, the MCU can evaluate sensor inputs, execute a control algorithm, and generate timer-controlled PWM outputs. In a sensor node, it can acquire analog measurements, condition the data in firmware, and forward results through an available serial interface.
When laying out a board, place decoupling capacitors close to the supply pins and reserve programming and debug access for the Cortex-M0+ ecosystem. Confirm every peripheral pin assignment against the manufacturer pin table before routing the PCB, especially because firmware configuration, alternate functions, and board-level signal integrity determine real-world performance.
This page combines the confirmed STM32G041K8T6 specifications, same-footprint family alternatives, application guidance, and engineering checks that support faster component selection and board design. Each replacement still requires firmware, peripheral, timing, and lifecycle review before production use.
جێگرەوەکانی جێگۆڕکێ بۆ STM32G041K8T6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32G041K8T6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, CPU Core, Communication Interfaces, Flash Organization.
STM32G031K8T6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32G041K8T7
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G041K8T8
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G051K8T6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32G061K8T6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G041K8T6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Manufacturer | STMicroelectronics |
| Maximum CPU Frequency | 64 MHz |
| CPU Core | Arm Cortex-M0+ |
| Architecture | 32-bit RISC |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| RAM | 8 KB |
| ADC Resolution | 12-bit |
| ADC Channel Count | 30 channels |
| پاکێج | 32-LQFP, 7 x 7 mm |
| Total Pin Count | 32 pins |
| جۆری دامەزراندن | Surface mount |
| Product Series | STM32G0 |
| Device Variant | STM32G041x6/x8 |
| Control Peripherals | ADC, timers, and PWM |
| Product Type | Mixed-signal and timer-driven microcontroller |
ڕێنمایی ڕێکخستنی پینی STM32G041K8T6 32-lqfp, 7 x 7 mm
ڕێکخستنی پین بۆ STM32G041K8T6 (پاکێجی 32-lqfp, 7 x 7 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32G041K8T6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32G041K8T6 گونجاوە بۆ 6 بەکارھێنانs: Compact Motor Controllers, Sensor and Measurement Nodes, LED Lighting and Dimming, Industrial Automation and Control, Small Appliance Control, Communication Gateway and HMI Controller.
Compact Motor Controllers
The STM32G041K8T6 fits compact motor-control boards because its 64 MHz Arm Cortex-M0+ core can run a real-time control loop while timer and PWM resources generate drive commands. The 12-bit ADC can sample current, position, or speed feedback with 30 channels indicated for the device family. A practical implementation places the MCU between the feedback interface and an external bridge driver, computes demanded duty cycle in firmware, and updates PWM through hardware timers. Validate stall recovery, overcurrent response, and thermal behavior at the system level, because MCU suitability alone does not replace motor-driver protection.
پێشنیارکراو
Sensor and Measurement Nodes
The STM32G041K8T6 is appropriate for distributed sensor nodes that must acquire analog measurements and perform local processing. Its 12-bit ADC, 64 KB Flash, and 8 KB RAM provide enough memory for calibration, filtering, diagnostics, and communication routines, while the 64 MHz Cortex-M0+ core supports responsive acquisition and data preparation. The node can sample inputs through the ADC, apply digital filtering and scaling, then transmit results over a configured serial interface. Design the analog front end separately for sensor excitation, buffering, filtering, grounding, and reference accuracy so the converter operates within its intended input range.
پێشنیارکراو
LED Lighting and Dimming
The STM32G041K8T6 can implement intelligent LED dimming and lighting controls using timer-generated PWM and a 64 MHz Cortex-M0+ processing core. Firmware can apply user commands, dimming curves, thermal compensation, and fault handling while the ADC monitors a light-level or current signal. The 32-LQFP package also leaves access to multiple control and communication functions around a compact controller board. Choose external MOSFETs and a constant-current driver for the LED power stage, maintain short high-current switching paths, and include open-load and over-temperature recovery in the firmware.
پێشنیارکراو
Industrial Automation and Control
The STM32G041K8T6 supports compact industrial automation modules that must coordinate sensors, timers, communications, and discrete outputs. Its 64 MHz Arm Cortex-M0+ core can execute deterministic control tasks, while 64 KB Flash and 8 KB RAM accommodate protocol handling and working state. The 12-bit ADC enables process or condition monitoring, and PWM-capable timers can drive indicators, valves, or actuator commands. For factory equipment, add input conditioning and surge protection, implement watchdog recovery, and validate timing under electrical noise and temperature extremes before deployment.
پێشنیارکراو
Small Appliance Control
The STM32G041K8T6 is well matched to small appliances that combine user controls, motor or heater sequencing, sensing, and simple status feedback. Its 64 MHz Cortex-M0+ core can coordinate timers and events, the 64 KB Flash can store application and diagnostic firmware, and the 8 KB RAM is suitable for compact working-state requirements. PWM outputs can represent motor speed, valve position, or heating levels, while the ADC can monitor temperature or load information. Production designs should add safe shutdown paths, debounced inputs, brownout-aware firmware, and heater or motor interlocks.
پێشنیارکراو
Communication Gateway and HMI Controller
The STM32G041K8T6 can serve as the local controller in a compact gateway, keypad, or human-machine interface where serial data must be converted into control actions. Its 64 MHz Cortex-M0+ core supports protocol handling alongside timer-based control, and the 8 KB RAM accommodates working buffers for common serial tasks. The 32-LQFP package provides a useful mix of GPIO and alternate-function pins for display keys, indicators, and serial links. Use the manufacturer pin and alternate-function tables to avoid conflicts, and validate baud-rate tolerance, idle levels, and peripheral multiplexing on the final board.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32G041K8T6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32G031K8T6 | STM32G041K8T7 | STM32G041K8T8 | STM32G051K8T6 | STM32G061K8T6 |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Temperature-Grade Suffix | T6 | T6 | T7 | T8 | T6 | T6 |
| Cross-Manufacturer Replacement | Not established | Not established | Not established | Not established | Not established | Not established |
جیاکەرەوە سەرەکییەکان
- Mainstream 64 MHz Cortex-M0+ performance (بەراورد بەSTM32L051K8T6)
- Same-footprint temperature-grade flexibility (بەراورد بەSTM32G041K8T6)
- 64 KB Flash and 8 KB RAM configuration (بەراورد بەSTM32G031K8T6)
- Dedicated mixed-signal control positioning (بەراورد بەSTM32G031K8T6)
تێبینییەکانی دیزاین
Place the required supply-decoupling capacitors directly beside the STM32G041K8T6 power and ground pins, following the capacitor values and placement specified in the manufacturer hardware guidance. Keep the 32-LQFP escape routes short, maintain a continuous ground reference beneath and around the device, and avoid routing high-current switching paths through analog input areas. Because several pins can serve multiple alternate functions, freeze the pin plan after reviewing the peripheral requirements and preserve access to programming and debug signals.
Treat analog inputs as precision signal paths even though the converter is a 12-bit ADC. Use a defined reference arrangement, local input filtering, and a return path that does not share switching-current loops. Place analog circuitry near the MCU pins, keep digital and PWM routing away from sensitive sensor nets, and test settling time before sampling each channel. The 30-channel indication does not remove the need to verify which pins are analog-capable, their alternate functions, and their grouping in the manufacturer pin table.
Do not assume that another STM32G0 device in the same 32-LQFP package is firmware-compatible. Before replacing STM32G041K8T6, compare startup files, linker memory definitions, clock-tree settings, Flash and RAM requirements, ADC channels, timer mappings, serial peripherals, debug support, bootloader behavior, and every pin used by the board. Build and test the replacement firmware on the exact hardware revision, including motor start, sensor acquisition, communications, brownout recovery, and watchdog behavior.
Size the board power rail for both average processor demand and startup transients rather than relying only on a steady-state current estimate. Validate clock settings, peripheral load, and regulator operating region across the intended input-voltage range. Include brownout-safe firmware so the controller does not attempt unsafe actuator operations during rail collapse. If the design uses analog measurements or communications, separate noisy switching current paths from sensitive supply routing and verify the converter performance at the actual board loading.
زانیاری پابەندبوون
No explicit compliance declarations were identified for STM32G041K8T6. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering code through STMicroelectronics before production release.