STM32G431C6T6 - 170MHz Cortex-M4 MCU | STMicroelectronics
MPN: STM32G431C6T6 ✓ چالاکSTM32G431C6T6 گشتی
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and interfaces into one component. The STM32G4 family belongs to the hierarchy of Cortex-M MCUs, embedded processors, and general-purpose semiconductors. Its Cortex-M4F core adds floating-point instruction support, while the math accelerator accelerates suitable mathematical operations so the main CPU can handle control and communications tasks more efficiently.
Key device characteristics include 170 MHz processing performance, 213 DMIPS as stated by STMicroelectronics, 32 KB of Flash program memory, 32 KB of SRAM, and a dedicated math accelerator. The device is identified in the 48-LQFP 7 x 7 mm package. Operating-voltage descriptions for this ordered part include 1.8 V, 2.5 V, and 3.3 V operation, allowing integration with common embedded power rails.
The STM32G431x6 platform is based on the high-performance 32-bit Arm Cortex-M4 RISC architecture with floating-point capability. Its memory configuration is tailored for control firmware, boot logic, parameter storage, communications handling, and signal-processing routines. The combination of 170 MHz clocking, 32 KB SRAM, and the math accelerator supports responsive mixed-signal and real-time control workloads without moving routine calculations to an external processor.
Typical applications include digital power conversion, motor-control systems, industrial automation, measurement and test equipment, sensor conditioning, and compact embedded platforms. Its rich analog feature set is particularly useful when a control system must operate analog inputs, perform signal acquisition, and execute deterministic control algorithms within one microcontroller package.
Designers should verify the exact peripheral pin assignments, electrical limits, clock configuration, and startup sequence in the manufacturer datasheet before layout is released. Firmware should also be checked for the complete STM32CubeG4 peripheral set, interrupt requirements, analog-reference handling, and board-level decoupling rather than assuming that every STM32G4 member has identical behavior.
This product page organizes the key technical facts, practical application guidance, design cautions, and order-code alternatives for STM32G431C6T6. It also distinguishes physical pin compatibility from memory and temperature-grade differences so engineers can assess a replacement against both PCB and firmware requirements.
جێگرەوەکانی جێگۆڕکێ بۆ STM32G431C6T6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32G431C6T6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Flash Memory, SRAM, Math Accelerator, Communication Interfaces.
STM32G431C6T7
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G431CBU6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32G431CBT6
✅ جێگرەوەی ڕاستەوخۆ✓ بەردەستە
$3.9773 / یەکە
بینینی داتاشیت →STM32G431C8T6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32G431C8T7
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G431C6T6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit Arm Cortex-M4F microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| زۆرترین فرێکوێنسیی کاتژمێر | 170 MHz |
| Peak Performance | 213 DMIPS |
| Architecture | 32-bit RISC |
| Flash Memory | 32 KB |
| SRAM | 32 KB |
| Math Accelerator | Present |
| Operating Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| پاکێج | 48-LQFP (7 x 7 mm) |
| ژمارەی پین | 48 pins |
| جۆری دامەزراندن | Surface mount |
| Program Memory Organization | 32K x 8 bits |
| Analog Resources | Rich analog feature set |
ڕێنمایی ڕێکخستنی پینی STM32G431C6T6 48-lqfp (7 x 7 mm)
ڕێکخستنی پین بۆ STM32G431C6T6 (پاکێجی 48-lqfp (7 x 7 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32G431C6T6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32G431C6T6 گونجاوە بۆ 6 بەکارھێنانs: Digital Power Conversion, Industrial Motor Control, Precision Measurement and Test, Sensor Conditioning and IoT Edge Control, Communication Equipment, Embedded Control and Automation.
Digital Power Conversion
The STM32G431C6T6 fits closed-loop digital power controllers because its 170 MHz Arm Cortex-M4F core executes control algorithms quickly, while 32 KB of SRAM supports working data, state variables, and communication buffers. The dedicated math accelerator improves throughput for suitable arithmetic operations without requiring an external accelerator. Its rich analog resources also support sensing from power-stage voltages and currents. Place the device in the 48-LQFP 7 x 7 mm footprint and follow the manufacturer datasheet for PWM routing, analog filtering, reference layout, and decoupling.
پێشنیارکراو
Industrial Motor Control
The STM32G431C6T6 supports industrial motor-control architectures where rapid control-loop execution and mixed-signal measurement are required. Its 170 MHz Cortex-M4F processor and math accelerator can handle suitable control mathematics, while the rich analog feature set provides a path to current, voltage, and position sensing. The 48-LQFP package keeps the controller compact enough for multi-axis or distributed equipment. Designers should validate timer channels, encoder interfaces, ADC timing, protective shutdown paths, and thermal performance against the exact application requirements.
پێشنیارکراو
Precision Measurement and Test
The STM32G431C6T6 is appropriate for compact measurement instruments that combine analog acquisition, calibration, and real-time data processing. Its 170 MHz Cortex-M4F core can process sampled values and communicate results, while 32 KB of SRAM accommodates measurement buffers and working state. The math accelerator can improve throughput for suitable filtering or numerical operations. For laboratory or industrial test equipment, follow the datasheet’s analog-reference and decoupling guidance, isolate sensitive analog paths, and verify ADC performance under the intended clock and operating voltage.
پێشنیارکراو
Sensor Conditioning and IoT Edge Control
The STM32G431C6T6 suits edge-control nodes that must acquire sensor inputs and run local logic before forwarding results. Its 32 KB Flash provides space for control firmware, while 32 KB SRAM supports protocol buffers and application state. The Cortex-M4F floating-point capability is useful for sensor filtering and unit conversion, and the math accelerator can assist selected arithmetic routines. The 48-LQFP package simplifies assembly where analog and digital components share a compact board. Verify low-power mode behavior, peripheral clock requirements, and analog-channel multiplexing before deployment.
پێشنیارکراو
Communication Equipment
The STM32G431C6T6 can serve as the embedded controller in compact communication equipment where protocol handling, analog monitoring, and real-time housekeeping share one processor. Its 170 MHz Cortex-M4F core provides sufficient throughput for stack processing and control tasks, while the math accelerator can assist data-formatting or signal-processing workloads. The rich analog feature set supports supervision of supply rails or external sensors. A designer should allocate Flash carefully for networking stacks, review SRAM headroom, and confirm peripheral multiplexing and pin assignment in the manufacturer package tables.
پێشنیارکراو
Embedded Control and Automation
The STM32G431C6T6 is well suited to industrial automation modules that monitor inputs and execute deterministic control functions. Its 170 MHz Cortex-M4F processor handles protocol and control tasks, while the dedicated math accelerator can improve arithmetic throughput. Thirty-two kilobytes of SRAM gives embedded designers room for buffers, state machines, and diagnostic data without immediately requiring an external memory device. For deployment, follow the datasheet for clock-tree setup, supply sequencing, watchdog configuration, I/O levels, and thermal derating so the control module remains reliable in its enclosure.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32G431C6T6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32G431C6T7 | STM32G431CBU6 | STM32G431CBT6 | STM32G431C8T6 | STM32G431C8T7 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Processor Core | Arm Cortex-M4F | Arm Cortex-M4F | Arm Cortex-M4F | Arm Cortex-M4F | Arm Cortex-M4F | Arm Cortex-M4F |
| Maximum Clock Frequency | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz |
| Peak Performance | 213 DMIPS | 213 DMIPS | 213 DMIPS | 213 DMIPS | 213 DMIPS | 213 DMIPS |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Math Accelerator | Present | Present | Present | Present | Present | Present |
| Temperature-Grade Code | T6 | T7 | U6 | T6 | T6 | T7 |
جیاکەرەوە سەرەکییەکان
- Matches the target core, clock, memory, and package without changing the PCB footprint (بەراورد بەSTM32G431C6T7)
- Same physical footprint with additional Flash headroom for revised firmware (بەراورد بەSTM32G431CBT6)
- Broader software and boot-code flexibility without a package change (بەراورد بەSTM32G431C8T6)
- Combines 170 MHz processing with an integrated math accelerator (بەراورد بەSTM32G431C8T7)
تێبینییەکانی دیزاین
Route analog inputs, voltage references, and high-speed clock signals away from digital return currents and switching nodes. Place input and output bypass capacitors close to their associated pins, use a short ground return, and follow the package-specific land pattern in the manufacturer datasheet. For mixed-signal boards, reserve a quiet analog region and connect analog and digital ground planes at a controlled location rather than allowing high-current paths to flow beneath the MCU.
Select the supply architecture for the required 1.8 V, 2.5 V, or 3.3 V operating condition and verify each internal regulator, analog-supply, and external operating mode against the datasheet. Decouple each supply domain near the device, control supply ramp rates where required, and account for startup current as well as steady-state current. Do not assume that a rail supporting the digital core also satisfies the analog and external-access requirements without checking the electrical-characteristics tables.
Changing from the C6 density code to C8 or CB is a physical LQFP match but not necessarily a transparent firmware match. Review linker placement, fixed-address constants, bootloader assumptions, Flash wait-state configuration, peripheral availability, and calibration data before substitution. Likewise, a T6-to-T7 or U6 ordering-code change alters environmental qualification. Verify the complete ordering code, temperature range, and production firmware against the manufacturer documentation.
Estimate worst-case junction temperature from the processor activity, analog conversion rate, operating voltage, and ambient temperature using the manufacturer’s current and thermal data. The 48-LQFP 7 x 7 mm package benefits from continuous copper beneath and around the device, but copper area alone may not be sufficient for sustained maximum-frequency workloads. Check the package thermal metrics against the board construction and enclosure, and reduce clock or peripheral activity when the thermal design cannot meet the required temperature margin.
زانیاری پابەندبوون
The manufacturer product and datasheet pages were used for technical identification; explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the retrieved excerpts. Confirm current declarations for the exact ordering code before production release.