STM32G491RET6 - 170MHz Cortex-M4F | STMicroelectronics
MPN: STM32G491RET6 ✓ چالاکSTM32G491RET6 گشتی
An Arm Cortex-M4F microcontroller combines a 32-bit reduced-instruction-computing core with single-precision floating-point hardware in a compact embedded processor. Within the STM32 product hierarchy, the STM32G4 family sits between general-purpose microcontrollers and specialized high-performance control devices. It is appropriate for applications involving real-time control, signal measurement, communication, and mixed analog-and-digital system management.
The STM32G491RET6 operates at up to 170 MHz and contains 512 KB of Flash memory. Its listed operating-voltage options include 1.8 V, 2.5 V, and 3.3 V, allowing the device to fit power architectures based on low-voltage digital systems. The 64-LQFP package provides 64 externally accessible leads and is suitable for automated assembly and designs that require a moderate number of general-purpose and peripheral connections.
The Cortex-M4F architecture supports floating-point calculations commonly needed in control loops, filtering, signal transformation, and instrumentation. Integrated analog functions make the device useful for data acquisition systems that must sample and process sensor signals locally. Flash memory provides on-device program storage, while the high clock rate supports responsive multitasking and real-time control without requiring an external processor.
Typical uses include industrial sensor controllers, motor-control subsystems, building equipment, power-conversion controllers, medical monitoring modules, and connected embedded products. The STM32G491 family can also support compact low-power-control designs when the MCU is placed in an appropriate sleep or standby mode during inactive intervals.
PCB implementation should follow the manufacturer pin-definition and land-pattern requirements exactly. Place decoupling capacitors close to the supply pins, preserve the recommended clock and reset layout, and program unused inputs to safe levels. Confirm the device's electrical, timing, and package details against the STMicroelectronics datasheet before releasing a production layout.
This product record combines the principal MCU specifications, sourcing guidance, application fit, package considerations, and replacement constraints into a design-focused reference. It helps engineers distinguish verified drop-in replacements from merely similar devices before committing a mixed-vendor BOM.
جێگرەوەکانی جێگۆڕکێ بۆ STM32G491RET6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32G491RET6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Core, Flash Memory, Package.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەSTM32G491RET6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit Arm Cortex-M4F microcontroller |
| Core | Arm Cortex-M4F |
| زۆرترین فرێکوێنسیی کاتژمێر | 170 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 |
| Architecture | 32-bit RISC |
| Supply Voltage Options | 1.8 V, 2.5 V, 3.3 V |
| پاکێج | 64-LQFP (10 mm x 10 mm) |
| جۆری دامەزراندن | Surface mount |
| Analog Resolution | 12-bit |
ڕێنمایی ڕێکخستنی پینی STM32G491RET6 64-lqfp (10 mm x 10 mm)
ڕێکخستنی پین بۆ STM32G491RET6 (پاکێجی 64-lqfp (10 mm x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32G491RET6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32G491RET6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Controller, Real-Time Motor and Power Control, Building Equipment Controller, Medical Monitoring Module, Connected IoT Edge Controller, Precision Data-Acquisition System.
Industrial Sensor Controller
The STM32G491RET6 fits industrial sensor-controller designs that require responsive sampling, local signal processing, and deterministic control. Its 170 MHz Arm Cortex-M4F core can process measurements and execute control logic, while the 512 KB of internal Flash provides room for application firmware, diagnostics, calibration data, and a bootloader. The 12-bit conversion capability supports sensor interfaces when the selected input range, source impedance, acquisition timing, and filtering satisfy the measurement requirements. Use the device in an environment with an industrial-rated power architecture and place local decoupling close to the supply pins. A key design trade-off is that performance and memory are fixed at procurement, so firmware partitioning and external expansion should be planned if future requirements exceed the 512 KB Flash allocation.
پێشنیارکراو
Real-Time Motor and Power Control
The STM32G491RET6 is suitable for compact real-time control subsystems where deterministic execution and mixed analog-and-digital processing are required. Its 170 MHz Cortex-M4F core includes hardware floating-point capability, which is useful for proportional-integral-derivative calculations, transforms, and filtering in power-conversion or actuator-control algorithms. The 512 KB of Flash accommodates control firmware, parameter tables, and fault-handling routines, while 12-bit conversion supports selected feedback measurements. Place external drivers, isolation components, and power stages outside the MCU package, and follow the manufacturer layout guidance for sensitive analog and switching nodes. Validate timing, update rates, thermal margins, and protection behavior in the complete power stage rather than relying on processor clock speed alone.
پێشنیارکراو
Building Equipment Controller
The STM32G491RET6 can serve as the central controller in building equipment such as environmental monitoring, access-control subsystems, actuators, and supervisory controllers. A 170 MHz Arm Cortex-M4F core provides ample control-loop and communication-processing capability, and the 512 KB internal Flash supports structured firmware with multiple operating modes. Its listed 1.8 V, 2.5 V, and 3.3 V supply options make it relevant to systems built around common low-voltage rails, although the exact operating range must be matched to the device configuration. The 64-LQFP package gives designers a practical number of external connections for sensors and discrete control signals. Use the manufacturer pin table to assign alternate functions and confirm timer, communication, and analog resources before committing the schematic.
پێشنیارکراو
Medical Monitoring Module
The STM32G491RET6 is applicable to compact medical monitoring modules that combine sensor conditioning, data processing, and supervisory control. The 170 MHz Cortex-M4F core can execute filtering and control functions, the 12-bit conversion capability can support selected analog measurements, and 512 KB of Flash provides storage for firmware and configuration data. The package's 64 leads provide a practical balance between peripheral access and board area for an embedded instrument. Medical use still requires system-level verification of electrical isolation, leakage, accuracy, alarm behavior, and applicable quality requirements; the MCU specification alone does not establish regulatory compliance. Keep sensitive analog paths short, provide stable references where required, and validate every measurement chain across its intended temperature and supply range.
پێشنیارکراو
Connected IoT Edge Controller
The STM32G491RET6 is well suited to an IoT edge controller that gathers local sensor information, applies filtering or control logic, and manages communications through external or integrated peripherals. Its 170 MHz Cortex-M4F core supports responsive protocol handling and concurrent embedded tasks, while 512 KB of Flash can hold networking, application, security, and update code. The available 1.8 V, 2.5 V, and 3.3 V supply options support common embedded power rails. Use low-power modes only after measuring the complete board's standby and wake behavior, because radio, sensors, regulators, and indicator circuits may dominate system consumption. PCB planning should separate radio or communications isolation from analog sensing areas and provide tested clock and reset circuits for reliable field operation.
پێشنیارکراو
Precision Data-Acquisition System
The STM32G491RET6 supports compact data-acquisition systems that need local conversion, filtering, and data preparation. Its 12-bit conversion capability provides a practical ADC resolution for many instrumentation tasks, and the 170 MHz Cortex-M4F core can execute averaging, calibration, filtering, and data-packet preparation. With 512 KB of Flash, the device can store a control application, acquisition routines, and calibration information. Signal quality depends on the selected ADC input, source impedance, reference quality, sampling strategy, and analog-layout implementation, so numerical performance must be established at the system level. Use the manufacturer analog recommendations, provide clean references and supply bypassing, and avoid routing high-speed switching signals beneath sensitive acquisition nodes.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32G491RET6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Product Type | 32-bit Arm Cortex-M4F microcontroller |
| Brand | STMicroelectronics |
| Package | 64-LQFP (10 mm x 10 mm) |
| Maximum Clock Frequency | 170 MHz |
| Flash Memory | 512 KB |
| Architecture | 32-bit RISC |
| Supply Voltage Options | 1.8 V, 2.5 V, 3.3 V |
| Analog Resolution | 12-bit |
| Mounting Type | Surface mount |
| Core | Arm Cortex-M4F |
جیاکەرەوە سەرەکییەکان
- Combines 170 MHz performance with 512 KB of internal Flash (بەراورد بەSTM32G491KEU6)
- Uses a 64-LQFP footprint for general embedded control (بەراورد بەSTM32G491KEU6)
- Provides a 170 MHz Cortex-M4F core with 12-bit conversion (بەراورد بەSTM32G491VET6)
تێبینییەکانی دیزاین
Place every supply-decoupling capacitor directly between the corresponding power pin and ground, using the minimum recommended loop area and the shortest possible traces. Follow the manufacturer reference schematic and layout guidance for capacitor values and placement. Separate analog input routing from switching-node and high-current return paths, and route the exposed system ground so sensor and communication return currents do not share unwanted paths through sensitive circuitry.
Design the supply network around the required 1.8 V, 2.5 V, or 3.3 V operating option and verify current limits, startup behavior, and tolerance in the final configuration. Confirm which supply pins belong to the selected core and I/O voltage domains before connecting external circuits. Do not assume that a rail label identifies a specific MCU domain; use the pin-description table and power-supply diagram to preserve sequencing and voltage relationships.
Keep clock routing short, continuous, and away from switching inputs and analog sources. Follow the manufacturer clock-source and bypass-component recommendations exactly, and provide a clean reset implementation with the specified pull-up or RC arrangement. If external memories or communication devices share the PCB, inspect their bus timing and return-current paths against the 170 MHz operating capability rather than assuming the MCU can compensate for poor signal conditioning.
Avoid treating related STM32G491 order codes as automatic drop-in replacements. Package pin count, Flash density, SRAM capacity, temperature grade, and peripheral configuration must be compared with the exact STM32G491RET6 ordering code. For a second source, request a quote for the exact MPN and require written confirmation of footprint and pin compatibility; otherwise include software, timing, and hardware requalification in the conversion plan.
زانیاری پابەندبوون
Compliance status must be confirmed for the exact STM32G491RET6 ordering code using the current STMicroelectronics product documentation and the manufacturer's material-declaration records.