STM32L051R8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
MPN: STM32L051R8T6 ✓ چالاکSTM32L051R8T6 گشتی
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripheral interfaces and clocking circuitry into one package. The STM32L0 series belongs to the hierarchy of embedded microcontroller, 32-bit RISC processor, embedded processor and semiconductor. Applications commonly require a compact controller that can execute firmware, acquire data, control outputs and communicate with sensors or other system components without requiring a separate processor and memory devices.
The STM32L051R8T6 uses an Arm Cortex-M0+ core capable of 32 MHz operation and provides 64 KB of Flash memory, organized as 64K by 8 bits. Its 64-LQFP 10 mm by 10 mm package supports surface-mount assembly and provides a mechanically substantial alternative to smaller leadless packages. The STMicroelectronics product family is identified as an access-line, ultra-low-power MCU family, making the device relevant to designs where operating efficiency and integration are important.
The exact peripheral set, RAM capacity, supply limits, pin assignments, clock tree and electrical characteristics are governed by the manufacturer documentation for the STM32L051x6 and STM32L051x8 device family. Firmware selection should account for the specific order code, package drawing, exposed peripheral pins and errata information. Because firmware and board support are closely tied to silicon revision, developers should treat the complete order code as the controlling device identifier.
Typical application directions include compact environmental sensors, industrial sensing nodes, low-power data loggers, actuator controllers, communications modules and embedded accessories. In these systems, the Cortex-M0+ instruction set handles real-time control tasks, while the integrated Flash memory stores application firmware. The 64-pin LQFP package can also make prototype assembly and signal access more convenient than a very small leadless package.
PCB planning should preserve the LQFP-64 footprint, pad geometry, pin-1 orientation and all exposed leads. Decoupling, grounding, clock stability and unused-pin treatment must follow the manufacturer reference design and device documentation. Software bring-up should also verify the low-power mode configuration, peripheral clock gates and debugger connection because these details affect both energy use and board-level reliability.
This product record combines the exact order-code attributes, package information, commercial inquiry workflow, drop-in candidates and application-oriented engineering guidance in one concise reference. It helps engineers distinguish the STM32L051R8T6 from related MCU options before committing the 64-LQFP footprint to a PCB.
جێگرەوەکانی جێگۆڕکێ بۆ STM32L051R8T6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32L051R8T6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, ADC, Architecture, Communication Interfaces.
STM32L051R8T7
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L052R8T6
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L100R8T6A
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32F030R8T6TR
✅ جێگرەوەی ڕاستەوخۆ✓ بەردەستە
$1.31 / یەکە
بینینی داتاشیت →STM32F101R8T6
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L051R8T6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ultra-low-power microcontroller (MCU) |
| Processor Core | Arm Cortex-M0+ |
| Maximum Core Frequency | 32 MHz |
| Instruction Set | 32-bit Arm Cortex-M0+ RISC |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Maximum CPU Clock | 32 MHz |
| پاکێج | 64-LQFP (10 mm x 10 mm) |
| ژمارەی پین | 64 pins |
| جۆری دامەزراندن | Surface mount |
| Shipping Format | Tray |
ڕێنمایی ڕێکخستنی پینی STM32L051R8T6 64-lqfp (10 mm x 10 mm)
ڕێکخستنی پین بۆ STM32L051R8T6 (پاکێجی 64-lqfp (10 mm x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32L051R8T6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32L051R8T6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Environmental Sensor Node, Low-Power Data Logger, Remote Sensor Communications Module, Battery-Powered Actuator Controller, Smart Home Control Module, Compact Instrumentation Controller.
Industrial Environmental Sensor Node
The STM32L051R8T6 fits an industrial environmental sensor node that must acquire measurements, apply local filtering and control an output while keeping the controller compact. Its Arm Cortex-M0+ processor operates at up to 32 MHz for responsive acquisition and control, and 64 KB of Flash provides a defined budget for drivers, calibration and communications. The 64-LQFP package exposes a generous pin count for sensor inputs and serial interfaces. In a typical deployment, the MCU reads the sensor, converts the result, stores operating state and transmits data through a communications peripheral. Because the exact peripheral complement and supply limits depend on the complete order code, the engineer should verify channel counts and electrical limits against the manufacturer documentation before finalizing the sensor interface and power tree.
پێشنیارکراو
Low-Power Data Logger
The STM32L051R8T6 is appropriate for a low-power data logger because STMicroelectronics identifies the STM32L0 access line as ultra-low-power and provides a 32-bit Cortex-M0+ core capable of 32 MHz operation. The device can coordinate periodic sensor sampling, timestamps, local buffering and a low-duty-cycle communications cycle. Its 64 KB Flash provides enough space for embedded firmware and configuration handling in many compact logging designs, while the 64-LQFP package simplifies access to external memory, sensors and status indicators. The design should activate only the peripherals required for each acquisition phase and use the manufacturer-defined low-power states to control consumption. A complete battery-life estimate must include sensor current, radio activity, regulator efficiency, leakage and board contamination rather than relying only on the microcontroller specification.
پێشنیارکراو
Remote Sensor Communications Module
The STM32L051R8T6 can serve as the control processor in a remote sensor communications module where a compact surface-mount footprint and efficient processing are priorities. The 32 MHz Cortex-M0+ core handles packet preparation, sensor data formatting and supervisory logic, while the 64 KB Flash stores protocol and application firmware. The 64-LQFP package provides a practical choice when design teams want readily accessible leads during prototype assembly rather than an extremely small leadless package. Communications design should confirm the exact UART, SPI, I2C and other interface availability for the selected order code before assigning pins. Firmware should also include robust reset behavior, link supervision and peripheral clock gating so that radio inactivity translates into meaningful system-level power savings.
پێشنیارکراو
Battery-Powered Actuator Controller
The STM32L051R8T6 is suitable for a battery-powered actuator controller that must interpret commands, evaluate sensor inputs and drive an output through external power circuitry. Its Cortex-M0+ core provides 32-bit processing at up to 32 MHz, allowing real-time control logic to coexist with communication handling, and 64 KB of Flash stores the control application. The 64-LQFP package offers 64 leads for control signals, position sensing, status indication and programming access. The MCU should not drive high-current loads directly; use suitable transistor or driver stages, preserve separation between sensitive analog returns and switching current, and provide local protection against reverse polarity or transients. Final power-loss behavior must be verified in software and with the complete actuator circuit.
پێشنیارکراو
Smart Home Control Module
The STM32L051R8T6 can support a smart-home control module that coordinates user inputs, local indicators and connected peripherals in an embedded network. Its 32 MHz Cortex-M0+ core provides sufficient control performance for event handling, device-state management and communication protocols, while the 64 KB Flash capacity accommodates application code and a bootloader within one integrated part. The 64-LQFP package is useful when product development requires easy prototype access to many I/O points. A practical design can use the microcontroller for debouncing, status logic and peripheral control while offloading wireless connectivity to a dedicated module. Before release, engineers should verify the exact I/O voltage, peripheral mix, reset behavior and low-power requirements for the target STM32L051R8T6 configuration.
پێشنیارکراو
Compact Instrumentation Controller
The STM32L051R8T6 is a reasonable fit for compact instrumentation that combines local signal conditioning, digital control and data transfer. The Cortex-M0+ core can execute measurement sequencing and control firmware at up to 32 MHz, and the 64 KB Flash provides storage for application code in a compact 10 mm by 10 mm LQFP package. Its relatively large lead count can shorten prototype interconnects to external sensors, references and communications circuits. Instrumentation accuracy depends on more than processor performance, so the analog front end, grounding, reference source and supply arrangement require separate review. The engineer should also verify whether the selected order code exposes the required ADC channels and whether those pins conflict with communication functions. Calibration data and fault handling should be included in the firmware architecture.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32L051R8T6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32L051R8T7 | STM32L052R8T6 | STM32L100R8T6A | STM32F030R8T6TR | STM32F101R8T6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) |
| Flash Memory | 64 KB | 64 KB | 64 KB class | 64 KB class | 64 KB class | 64 KB |
| Power Class | Ultra-low-power STM32L0 access line | Ultra-low-power STM32L0 access line | STM32L0 ultra-low-power family | STM32L1 family | STM32F0 family | STM32F1 family |
جیاکەرەوە سەرەکییەکان
- Closest same-family order-code alternative (بەراورد بەSTM32L051R8T7)
- Low-power STM32L0 family positioning (بەراورد بەSTM32F101R8T6)
- Same mechanical footprint across the candidate set (بەراورد بەSTM32F030R8T6TR)
تێبینییەکانی دیزاین
Assign the PCB footprint from the 64-LQFP package drawing and preserve the manufacturer-defined pin-1 orientation, lead pitch and exposed termination geometry. The STM32L051R8T6 uses a 10 mm by 10 mm package, but footprint correctness depends on the exact body, lead span, setback and courtyard dimensions rather than the nominal size alone. Keep analog, oscillator, reset and communications routing away from noisy switching nodes, and maintain a continuous return path beneath digital signal routes where the layout permits.
Build the supply network from the manufacturer's pin and decoupling requirements. Place the required bulk and local capacitors at their designated power pins, keep the high-current return path compact, and verify every supply rail against the electrical-characteristics table before selecting regulators. The STM32L051R8T6 is associated with 2.5 V and 3.3 V operation, but engineers must confirm exact minimum and maximum limits for the fitted order code. Include brownout, reset and power-sequencing checks in bring-up rather than assuming every rail can rise simultaneously.
Use the manufacturer pin-description table to assign 64-LQFP leads and to identify supply, ground, reset, clock, debug and analog inputs. Confirm that alternate-function multiplexing does not remove a required peripheral from the selected pins. Route the oscillator network and sensitive analog signals away from serial, switching and power-conversion currents. For a mixed-signal board, use disciplined partitioning and return-path planning to prevent digital return current from crossing beneath analog or reference circuitry.
Do not approve a replacement based only on the 64-LQFP outline. Validate electrical limits, memory organization, peripheral availability, pin multiplexing, clock tree, low-power states, startup behavior, watchdog function and firmware support for every candidate. STM32L051R8T7 is the closest same-family option, while STM32L052R8T6 and STM32L100R8T6A require family-level review. Any board change should also account for different pin functions and software configuration even when the mechanical footprint remains unchanged.
زانیاری پابەندبوون
The exact order-code compliance and qualification records should be confirmed in the manufacturer regulatory documentation. No compliance designation was inferred from the device family name.