STM32L053C6T6 - 32MHz Ultra-Low-Power MCU | STMicroelectronics
MPN: STM32L053C6T6 ✓ چالاکSTM32L053C6T6 گشتی
An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption while retaining the processing, memory, and peripheral capabilities needed for embedded control. The STM32L0 series belongs to the ARM Cortex-M0+ microcontroller hierarchy and combines a compact general-purpose processor with energy-saving modes, making it suitable for battery-operated, portable, and connected devices.
The STM32L053C6T6 includes 32 KB of Flash, a 32 MHz ARM Cortex-M0+ core, USB 2.0 crystal-less connectivity, and an LCD-capable feature set. Its 1.8 V to 3.6 V operating supply supports low-energy embedded systems. A broad temperature option from -40°C to +125°C supports industrial and extended-temperature environments when the appropriate ordering variant is specified.
The device's low-power architecture includes multiple power-saving modes for designs that spend substantial time idle. USB connectivity adds a practical interface for configuration, data exchange, and firmware update workflows, while the Cortex-M0+ core provides a 32-bit execution environment suitable for control logic, communications, and compact user interfaces.
Typical applications include USB-connected sensors, low-power data loggers, compact industrial controllers, wearable and portable devices, and USB-to-LCD interface equipment. In each case, the combination of 32 KB Flash, a 32 MHz core, USB 2.0, and low-power operating modes supports a useful balance of capability, board area, and energy efficiency.
Designers should verify the exact pin functions, peripheral availability, memory map, and exposed-pin configuration against the manufacturer datasheet before layout. USB signal routing, crystal-less operation, decoupling, and low-power mode entry are especially important because they affect firmware scheduling, EMI performance, and reliable peripheral communication.
This page combines manufacturer specifications, distributor pricing, pin-compatible alternatives, comparison parameters, and practical design guidance. It also distinguishes verified facts from parameters requiring direct review of the STM32L053x6/8 datasheet, helping engineers source the device without relying on unverified substitutions.
جێگرەوەکانی جێگۆڕکێ بۆ STM32L053C6T6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32L053C6T6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, Communication Interfaces, Comparators, Low-Power Modes.
STM32L053C6T7
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L052C6T6
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L152C6T6
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L053C6T3
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L053C8T6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L053C6T6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ultra-low-power microcontroller |
| CPU Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Supply Voltage Range with BOR | 1.8 V to 3.6 V |
| Power-Down Supply Voltage | Down to 1.65 V |
| Supply Voltage Range without BOR Option | 1.65 V to 3.6 V |
| مەودای پلەی گەرمیی کارکردن | -40°C to +125°C |
| USB Interface | USB 2.0 crystal-less |
| LCD Support | LCD controller capability |
| پاکێج | 48-LQFP (7 x 7 mm) |
| جۆری دامەزراندن | Surface mount |
| Low-Power Modes | Comprehensive power-saving modes |
| Maximum Package Pin Count | 48 pins |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
ڕێنمایی ڕێکخستنی پینی STM32L053C6T6 48 pins
ڕێکخستنی پین بۆ STM32L053C6T6 (پاکێجی 48 pins). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32L053C6T6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32L053C6T6 گونجاوە بۆ 6 بەکارھێنانs: USB-connected sensor node, Battery-powered data logger, Compact industrial controller, USB audio interface, Portable medical monitor, Wearable accessory.
USB-connected sensor node
The STM32L053C6T6 fits a USB-connected environmental or industrial sensor because its 32 MHz ARM Cortex-M0+ core can manage sampling and control logic while its 32 KB of Flash stores firmware. USB 2.0 crystal-less connectivity supports data transfer, configuration, or firmware update without requiring a separate USB bridge in the final product. The 1.8 V to 3.6 V operating range is suitable for low-energy 3.3 V systems. Engineering attention is still required for USB signal routing, power-state transitions, and the current draw of the attached sensor.
پێشنیارکراو
Battery-powered data logger
The STM32L053C6T6 is appropriate for a battery-powered data logger where the 32 KB Flash and ultra-low-power operating modes help balance stored data capacity with energy use. The Cortex-M0+ core can timestamp samples, manage local storage, and control a sensor while the device spends most of its time in a low-power state. Its supply range extends down to 1.65 V in power-down mode, although battery life must be calculated using the actual sleep current, wake-up behavior, sensor load, and write endurance.
پێشنیارکراو
Compact industrial controller
The STM32L053C6T6 can serve as a compact industrial controller when the design needs local logic, USB maintenance connectivity, and operation across the STM32 family's extended -40°C to +125°C temperature range. Its 32 MHz Cortex-M0+ core provides deterministic control for basic sequencing, status monitoring, and communication handling, while the 48-LQFP package remains easy to inspect and assemble. The exact temperature grade and peripheral set must match the product's environmental requirements, and industrial protection circuitry remains separate from the MCU.
پێشنیارکراو
USB audio interface
The STM32L053C6T6 is suitable for a control-oriented USB audio interface because USB 2.0 crystal-less connectivity and the 32 MHz Cortex-M0+ core can support configuration, monitoring, and low-bandwidth control traffic. The 32 KB of Flash accommodates firmware and control tables when the audio data path is handled by dedicated circuitry. Designers should avoid assigning high-throughput streaming to the MCU without detailed timing verification, and should use the manufacturer data sheet to validate USB clocking, transceiver requirements, and audio timing.
پێشنیارکراو
Portable medical monitor
The STM32L053C6T6 can support the control and communication portion of a portable medical monitor where low power, local USB connectivity, and a compact footprint are valuable. Its 32 MHz Cortex-M0+ core can supervise sensor sampling and device state, while the 32 KB Flash stores application and configuration firmware. This role should not process safety-critical diagnostic algorithms without an appropriate architecture and qualification review. Medical use also requires verification of electrical safety, electromagnetic compatibility, and the applicable regulatory obligations for the finished product.
پێشنیارکراو
Wearable accessory
The STM32L053C6T6 is suitable for a wearable accessory that acts as a low-power controller rather than a primary high-throughput processor. Its ultra-low-power architecture, low-voltage operation, compact 48-LQFP package, and 32 KB of Flash support firmware for gesture input, status indication, and communication control. The designer should select the lowest-cost and smallest package option that satisfies the production volume, use low-power modes whenever practical, and verify radio-current peaks because the MCU is normally only one part of the wearable power budget.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32L053C6T6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32L053C6T7 | STM32L052C6T6 | STM32L152C6T6 | STM32L053C6T3 | STM32L053C8T6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
جیاکەرەوە سەرەکییەکان
- Closest verified same-package ordering alternative (بەراورد بەSTM32L053C6T7)
- Same-package higher-Flash family option (بەراورد بەSTM32L053C8T6)
- Directly verified 32 KB, 48-LQFP comparison family (بەراورد بەSTM32L152C6T6)
- Low-voltage operation supports compact energy budgets (بەراورد بەSTM32L053C6T7)
تێبینییەکانی دیزاین
Validate the complete power budget across active, sleep, stop, and power-down states rather than relying only on the nominal operating current. The STM32L053C6T6 supports a 1.8 V to 3.6 V operating range with BOR and operation down to 1.65 V in power-down mode. Confirm each peripheral's permitted voltage, regulate the USB 3.3 V rail locally, and measure wake-up current with the final firmware because peripheral state and GPIO leakage can materially change battery life.
Use the manufacturer's STM32L053x6/STM32L053x8 package drawing and USB hardware guidance for the PCB footprint. Place all decoupling capacitors close to their designated supply pins, provide a clean ground return, and keep USB D+ and D- routing short, impedance-controlled, and free from unrelated switching nodes. The verified search data identifies a 48-LQFP 7 x 7 mm package, but it does not provide the complete pin table; do not finalize the footprint until every terminal has been checked against the official datasheet.
Do not assume that related STM32L0 suffixes are software-identical. STM32L053C6T7 and STM32L053C6T3 are same-family ordering alternatives, while STM32L052C6T6 and STM32L152C6T6 belong to related families whose peripheral sets can differ. STM32L053C8T6 doubles Flash from 32 KB to 64 KB but remains a different ordering option. Before substitution, compare the option bytes, clock tree, USB implementation, peripheral availability, bootloader behavior, and firmware startup code.
زانیاری پابەندبوون
The provided product, distributor, and datasheet-search results do not contain explicit compliance declarations. Compliance must be confirmed from the current STMicroelectronics product documentation or declaration before qualification.