STMicroelectronics

STM32L433CCT6 - 80MHz Cortex-M4 256KB Flash | STMicroelectronics

MPN: STM32L433CCT6 ✓ چالاک
48-LQFP, 7 x 7 mm Package 80 MHz Speed 256 KB Memory
MOQ: 1 |

STM32L433CCT6 گشتی

The STMicroelectronics STM32L433CCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with an FPU, operating at up to 80 MHz and delivering up to 100 DMIPS. It provides up to 256 KB of embedded Flash memory and 64 KB of SRAM, with USB full-speed, LCD, and external SMPS support. The device is packaged in a 48-LQFP package measuring 7 mm by 7 mm.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32L433xx family belongs to the STM32L4 ultra-low-power line and combines Cortex-M4 real-time processing with energy-conscious operation for embedded control, sensor, communication, and human-interface applications. Its Arm Cortex-M4 architecture provides a 32-bit RISC instruction set, while the integrated floating-point unit supports efficient control and signal-processing calculations.

The headline features of the STM32L433CCT6 are its 80 MHz maximum operating frequency, 100 DMIPS processing capability, 256 KB Flash memory, and 64 KB SRAM. USB full-speed connectivity enables USB peripherals and host or device communication, while LCD support simplifies connected displays. External SMPS support is useful in designs where the MCU controls a dedicated switched-capacitor or switching-mode power-supply stage.

The STM32L433xx architecture is designed for low-power embedded systems while retaining a high-performance Cortex-M4 core and integrated floating-point hardware. The 256 KB Flash capacity is suitable for firmware, boot code, configuration data, and application logic, while 64 KB SRAM supports working memory, buffers, stacks, and peripheral data movement. The combination of USB, LCD, and external SMPS support reduces the number of separate components needed in compact embedded platforms.

Typical applications include USB-connected sensor nodes, industrial control and monitoring equipment, compact human-interface panels, connected measurement instruments, and low-power embedded gateways. The LCD and USB features make the device useful in devices that need local display feedback and USB connectivity, while the Cortex-M4 FPU is appropriate for real-time control and floating-point signal processing.

When designing around the STM32L433CCT6, check the device-specific pin assignments, power-supply requirements, clock configuration, decoupling recommendations, and exposed-pad connection in the manufacturer datasheet. The 7 mm by 7 mm LQFP footprint supports conventional PCB assembly, but signal integrity and thermal performance still depend on the surrounding layout and power-delivery network.

جێگرەوەکانی جێگۆڕکێ بۆ STM32L433CCT6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32L433CCT6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Flash Memory, Core, External SMPS Support, Processor Core.

STMicroelectronics
Package: LQFP-48 (T6), 7 x 7 mm
Core: Arm Cortex-M4 with FPU (32-bit RISC)
بەراوردکردن لەگەڵ STM32L433CCT6 →
STMicroelectronics
Package: 48-LQFP
Flash Memory: 256 KB (256K x 8 bits)
Processor Core: Arm Cortex-M4 32-bit RISC core
بەراوردکردن لەگەڵ STM32L433CCT6 →
STMicroelectronics
External SMPS Support: Yes
Processor Core: Arm Cortex-M4 with floating-point unit
بەراوردکردن لەگەڵ STM32L433CCT6 →

STM32L433CCT6TR

✅ جێگرەوەی ڕاستەوخۆ
📦 48-LQFP (7x7)
Same STM32L433CCT6 device and 48-LQFP footprint; orderable packing format changes from tray to tape-and-reel, with electrical differences of 0% where the suffix does not change device parameters

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

STM32L433CCT6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Core Arm Cortex-M4 32-bit RISC with FPU
Maximum CPU Frequency 80 MHz
Performance 100 DMIPS
Flash Memory 256 KB
SRAM 64 KB
USB USB full-speed
Display Support LCD
External SMPS Support Supported
پاکێج 48-LQFP, 7 x 7 mm
جۆری دامەزراندن Surface mount
Core Architecture Arm Cortex-M4
Floating-Point Unit Integrated FPU

ڕێنمایی ڕێکخستنی پینی STM32L433CCT6 48-lqfp, 7 x 7 mm

ڕێکخستنی پین بۆ STM32L433CCT6 (پاکێجی 48-lqfp, 7 x 7 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 48-lqfp, 7 x 7 mm بۆ STM32L433CCT6

هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32L433CCT6.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

STM32L433CCT6 گونجاوە بۆ 6 بەکارھێنانs: USB-Connected Sensor Terminals, Compact Human-Interface Panels, Industrial Monitoring Equipment, Low-Power Data Acquisition Units, Connected Measurement Instruments, USB-Conditioned Embedded Gateways.

🧩

USB-Connected Sensor Terminals

The STM32L433CCT6 fits USB-connected sensor terminals because its 80 MHz Cortex-M4 core with FPU can process measurements while the integrated USB full-speed interface handles data exchange with a host. The 256 KB Flash capacity accommodates firmware, calibration data, and communication routines, while 64 KB SRAM supports working buffers. Designers should keep USB routing short, provide the required decoupling, and validate enumeration behavior across the intended power states.

📺

Compact Human-Interface Panels

The STM32L433CCT6 is well suited to compact human-interface panels because it combines an 80 MHz Cortex-M4 processor, LCD support, USB full-speed, and 256 KB of Flash in a 7 mm by 7 mm LQFP package. The MCU can manage display updates, input handling, configuration storage, and host communication without requiring a separate display interface controller. Layout work should prioritize the LCD interface, power integrity, and separation between noisy switching nodes and sensitive display circuitry.

🏭

Industrial Monitoring Equipment

The STM32L433CCT6 can serve as the control processor in industrial monitoring equipment requiring real-time acquisition, local status reporting, and USB service connectivity. Its Cortex-M4 FPU supports efficient numeric processing, and the 256 KB Flash and 64 KB SRAM provide space for application firmware and data buffers. Confirm the exact temperature range, analog interfaces, watchdog behavior, and peripheral mapping against the manufacturer datasheet before using it in safety-related monitoring functions.

📟

Low-Power Data Acquisition Units

The STM32L433CCT6 is appropriate for low-power data-acquisition units that combine sensing, local control, and USB connectivity. Its 80 MHz Cortex-M4 core provides computational headroom for filtering and control, while 64 KB SRAM can support acquisition buffers and the integrated USB peripheral can simplify wired transfer to a computer. The external SMPS capability may assist designs using a dedicated switched power stage, although the exact converter topology and control requirements must follow the manufacturer reference guidance.

🖥️

Connected Measurement Instruments

The STM32L433CCT6 supports connected measurement instruments by combining an 80 MHz Arm Cortex-M4 core, FPU, USB full-speed, 256 KB Flash, and 64 KB SRAM in one compact device. These resources allow a product to combine signal conditioning control, calibration tables, front-panel communication, and USB data export. Pay attention to analog grounding, reference-voltage stability, USB signal routing, and decoupling because embedded memory and digital interfaces can otherwise introduce errors into precision measurements.

🌐

USB-Conditioned Embedded Gateways

The STM32L433CCT6 can act as the local processor in a USB-conditioned embedded gateway, using its Cortex-M4 FPU for protocol handling and its USB full-speed interface for a wired host link. The 256 KB Flash and 64 KB SRAM are useful for protocol state, buffering, diagnostics, and local configuration. The design should define boot and power sequencing, provide stable USB impedance and decoupling, and verify that external SMPS use matches the selected power-conversion architecture.

What is STM32L433CCT6?
The STM32L433CCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller from STMicroelectronics with an integrated FPU, up to 256 KB of Flash memory, 64 KB of SRAM, and USB full-speed support. According to the manufacturer datasheet, the device operates at up to 80 MHz and reaches 100 DMIPS. It is packaged in a 48-LQFP package measuring 7 mm by 7 mm.
What is the maximum operating frequency of STM32L433CCT6?
The STM32L433CCT6 operates at up to 80 MHz. The manufacturer datasheet describes the STM32L433xx family as an ultra-low-power Arm Cortex-M4 32-bit RISC MCU with FPU, operating at a frequency of up to 80 MHz and providing 100 DMIPS. This performance level is suitable for real-time control, USB-connected peripherals, sensor processing, and compact embedded human-interface systems.
How much Flash and SRAM does STM32L433CCT6 have?
The STM32L433CCT6 provides up to 256 KB of Flash memory and 64 KB of SRAM. The manufacturer datasheet lists these resources for the STM32L433xx family, which allows firmware, configuration data, working buffers, and application state to be placed in the same MCU. Exact partition and memory-map details should be checked in the device datasheet before finalizing firmware and bootloader layouts.
Where can I download the STM32L433CCT6 datasheet PDF?
The official STM32L433CCT6 datasheet PDF is available at the STMicroelectronics document URL listed on this page. The manufacturer document describes the STM32L433xx Cortex-M4 MCU, including its 80 MHz maximum frequency, 100 DMIPS performance, up to 256 KB Flash, 64 KB SRAM, USB full-speed, LCD, and external SMPS features. Use the manufacturer pin-description and electrical-characteristics sections for final board design.
Where can I find the STM32L433CCT6 pinout?
The STM32L433CCT6 pinout is defined in the pin-description section of the manufacturer datasheet for the STM32L433xx family. The device uses a 48-LQFP, 7 x 7 mm package. Use the official pin table and package drawing to assign power, ground, clock, reset, debug, USB, LCD, and GPIO connections; do not infer unused pins or alternate-function assignments from a generic STM32 family diagram.
Does STM32L433CCT6 support USB and LCD?
Yes. The manufacturer datasheet identifies USB full-speed and LCD support among the STM32L433xx family features, while the product-page description confirms an ultra-low-power Cortex-M4 MCU operating up to 80 MHz. These integrated functions are useful for USB-connected instruments, local displays, sensor terminals, and compact control panels where a separate interface device would add board area.
What is the best drop-in replacement for STM32L433CCT6?
The STM32L433CCT6TR is the closest same-package alternative identified for the STM32L433CCT6 because it preserves the STM32L433xx device family and 48-LQFP footprint while changing the tape-and-reel packing format. The manufacturer product page and distributor listing identify the original as a 48-LQFP device. Firmware, exposed-pad, temperature, and qualification requirements should still be compared against the exact alternative datasheet.
Can STM32L433CCT6TR replace STM32L433CCT6?
STM32L433CCT6TR can serve as a packing-format alternative for STM32L433CCT6 when the board uses the same 48-LQFP footprint and the electrical, temperature, and qualification requirements match. The verified cross-reference information identifies STM32L433CCT6TR as an alternative candidate, but it does not publish a complete manufacturer cross-reference matrix. Confirm the exact suffix parameters in the STMicroelectronics datasheet and product documentation.
What can replace STM32L433CCT6?
STM32L433CCT6TR is the most direct replacement candidate found for the STM32L433CCT6 because it belongs to the same STM32L433xx family and uses the same 48-LQFP package class. A production substitution should confirm pin compatibility, voltage range, temperature grade, Flash and SRAM capacity, USB and LCD support, clock requirements, and qualification status from the exact manufacturer documentation. Broader STM32 families may require board or firmware changes and are not automatically drop-in replacements.
Is STM32L433CCT6 the same as STM32L433CCT6TR?
The STM32L433CCT6 and STM32L433CCT6TR represent the same STM32L433CCT6 device family with different orderable packing information, most notably tray versus tape-and-reel presentation. The verified manufacturer and distributor descriptions identify a 48-LQFP, 80 MHz, 256 KB Flash MCU with 64 KB SRAM, USB full-speed, LCD, and external SMPS support. Check the order-code details before changing production documentation.
STM32L433CCT6 vs STM32L433CCT6TR: which is better for production assembly?
STM32L433CCT6 is generally preferred when a production process uses trays, while STM32L433CCT6TR is generally intended for tape-and-reel assembly. The electrical function and 48-LQFP package class are the relevant selection criteria, but the exact order code should be confirmed against the current manufacturer product documentation. The choice should match the assembler’s component-handling requirement rather than an assumed functional difference.
When should I choose STM32L433CCT6 over another Cortex-M4 MCU?
Choose the STM32L433CCT6 when an embedded design requires an ultra-low-power Arm Cortex-M4 MCU with up to 256 KB Flash, 64 KB SRAM, USB full-speed, LCD support, external SMPS support, and a 7 mm by 7 mm 48-LQFP package. Choose another MCU when a different memory architecture, package, peripheral mix, qualification grade, or vendor ecosystem is required. Its strongest combination is local USB connectivity plus LCD and control processing in a compact embedded design.
Is STM32L433CCT6 suitable for industrial control applications?
The STM32L433CCT6 is suitable for many industrial control, monitoring, and connected-instrument designs because it combines an 80 MHz Cortex-M4 core with FPU, 256 KB Flash, 64 KB SRAM, USB full-speed, and LCD support. Final suitability depends on the exact operating-temperature range, electrical limits, peripheral requirements, safety or functional-safety obligations, and environmental qualification, which should be confirmed from the manufacturer datasheet.
What are the key specifications of STM32L433CCT6 that engineers should know?
The key STM32L433CCT6 specifications are an 80 MHz Arm Cortex-M4 core with FPU, 100 DMIPS performance, up to 256 KB Flash memory, 64 KB SRAM, USB full-speed, LCD support, external SMPS support, and a 48-LQFP 7 x 7 mm package. According to the manufacturer datasheet, these features make the MCU suitable for low-power embedded control, sensor, display, and USB-connected products.
Where can I buy STM32L433CCT6 and check its lead time?
Use the Request a Quote form on this XAIPART product page to request current STM32L433CCT6 availability, lead time, and order quantities. The verified distributor and manufacturer pages confirm that STM32L433CCT6 is a real STMicroelectronics orderable device in a 48-LQFP package, but the quoted response should be used for the current commercial commitment and packaging allocation.

داتای سەرچاوەی ئەندازیاری بۆ STM32L433CCT6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose STM32L433CCT6 for a compact embedded product that needs an 80 MHz Cortex-M4 with FPU, 256 KB Flash, 64 KB SRAM, USB full-speed, LCD support, and external SMPS support. Select STM32L433CCT6TR when the assembly process requires tape-and-reel presentation; it preserves the same STM32L433xx device identity and 48-LQFP footprint. The trade-off is procurement format rather than functional performance. For designs needing a different memory size, peripheral mix, package, temperature grade, or qualification status, compare the complete STM32L4 portfolio rather than forcing a board change. Any substitution should be checked against the exact manufacturer datasheet for pin multiplexing, boot configuration, clock requirements, power sequencing, and PCB assembly.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە STM32L433CCT6TR
Package 48-LQFP (7x7) 48-LQFP (7x7)
Brand STMicroelectronics STMicroelectronics
Core Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU
Maximum Frequency 80 MHz 80 MHz
Performance 100 DMIPS 100 DMIPS
Flash Memory 256 KB 256 KB
SRAM 64 KB 64 KB
USB USB full-speed USB full-speed
Display Support LCD LCD
External SMPS Support Supported Supported

جیاکەرەوە سەرەکییەکان

  • Integrated USB full-speed and LCD support (بەراورد بەSTM32L433CCT6TR)
  • Cortex-M4 FPU processing at 80 MHz (بەراورد بەSTM32L433CCT6TR)
  • Compact 48-LQFP integration (بەراورد بەSTM32L433CCT6TR)

تێبینییەکانی دیزاین

Follow the STM32L433xx power-supply connection and decoupling recommendations in the manufacturer datasheet. Place the input, analog, and digital bypass capacitors close to their associated pins, and route return currents directly to the appropriate ground plane. Because the device supports external SMPS, separate the controlled power-conversion path from sensitive signal routing and verify startup sequencing across the complete operating voltage range.

The 48-LQFP, 7 x 7 mm package is suitable for conventional surface-mount assembly, but the exposed-pad and thermal requirements must be followed exactly as specified by STMicroelectronics. Check the package drawing for pad geometry, solder mask, and paste recommendations before creating the footprint. Use an assembly process capable of handling the fine lead pitch and inspect the device after reflow.

Keep the USB differential pair routed as a controlled impedance pair with continuous reference-plane support and minimized stub length. Place USB protection and series-resistance components at locations approved by the device and USB implementation guidance. Avoid routing high-current SMPS or display timing nets beneath the MCU footprint where they can increase ground bounce or coupling into sensitive pins.

Do not treat another STM32 family member as a drop-in replacement solely because it uses a Cortex-M core. Boot pins, peripheral mapping, power architecture, pin multiplexing, and package dimensions can differ even across related families. For STM32L433CCT6, use the exact 48-LQFP pin table and confirm clock, USB, LCD, GPIO, and SWD assignments before schematic sign-off.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The verified manufacturer and distributor descriptions identify the STM32L433xx family and STM32L433CCT6 order code, but they do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown pending confirmation from the manufacturer product documentation or declaration.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

stm32l433cct6 datasheet stm32l433cct6 pin out STM32L433CCT6 datasheet pdf STM32L433CCT6 pinout STM32L433CCT6 STM32L433CCT6TR STM32L433CCT6 equivalent STM32L433CCT6 replacement STM32L433CCT6 48-LQFP footprint STM32L433CCT6 USB sensor STM32L433CCT6 LCD controller STM32L433CCT6 80MHz Cortex-M4 STM32L433CCT6 price STM32L433CCT6 stock STMicroelectronics STM32L433CCT6

پێکهاتە و زاراوە پەیوەندیدارەکان

STMicroelectronics STM32L433CCT6 STM32L433CCT6TR STM32L433xx STM32L4 Arm Cortex-M4 Arm Cortex-M4+ microcontroller MCU 32-bit RISC floating-point unit FPU 100 DMIPS embedded Flash memory SRAM USB full-speed LCD controller external SMPS 48-LQFP LQFP surface-mount package SWD low-power embedded control USB-connected sensor terminal industrial monitoring equipment
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ