STM32L431CCT6 - 80MHz Cortex-M4 256KB | STMicroelectronics
MPN: STM32L431CCT6 ✓ چالاکSTM32L431CCT6 گشتی
A microcontroller is a programmable system-on-chip that integrates a processor core, Flash program memory, RAM, peripherals, and interface controllers on one semiconductor device. The STM32L4 series occupies the low-power microcontroller segment of the broader embedded-processing hierarchy. STM32L431 devices use the Arm Cortex-M4 RISC core to balance computational performance, peripheral integration, and energy-efficient operation in battery-operated and always-on equipment.
The STM32L431CCT6 provides a 32-bit Arm Cortex-M4 processor, an operating frequency of up to 80 MHz, and 256 KB of Flash organized as 256K by 8 bits. Its 48-LQFP package supports compact surface-mount assembly while exposing a broad mix of digital, analog, timing, and communications resources. The part is positioned for designs that require more processing capability than an 8-bit or Cortex-M0+ controller without moving to a larger performance and power class.
STMicroelectronics describes the STM32L431xx family as an ultra-low-power microcontroller platform. This architecture is appropriate for applications that spend substantial time in low-energy states and need fast execution when active. The Cortex-M4 instruction set also supports efficient digital signal-processing tasks, while the integrated Flash and peripheral resources reduce the number of external components required in compact embedded systems.
Typical uses include connected industrial sensors, low-power data loggers, motor and actuator controllers, compact communication equipment, and portable measurement products. The 80 MHz operating rate supports responsive control loops and communication handling, while the 256 KB Flash capacity accommodates a bootloader, application firmware, configuration data, and update routines. The 7 mm by 7 mm LQFP footprint is also suitable for boards where a very small QFN package would be difficult to assemble.
When designing around the STM32L431CCT6, confirm that the PCB land pattern, pin assignment, clock strategy, power requirements, and peripheral allocation match the selected board revision. Place decoupling capacitors close to the supply pins and follow the pin-description table in the manufacturer datasheet when assigning nets. The 48-LQFP package also requires adequate solderable exposed perimeter for assembly and inspection.
This product page combines the manufacturer product description, package and memory characteristics, compatible family alternatives, and practical implementation guidance. It is intended to help engineers evaluate the STM32L431CCT6 for low-power embedded designs, verify footprint compatibility, and identify the peripheral details that should be confirmed before schematic release or PCB layout.
جێگرەوەکانی جێگۆڕکێ بۆ STM32L431CCT6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32L431CCT6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package.
STM32L432CCT6
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L433CCT6
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32L431CCY6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32L431CCT6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 32-bit RISC core |
| Maximum Operating Frequency | 80 MHz |
| Flash Memory | 256 KB (256K x 8 bits) |
| پاکێج | 48-LQFP |
| Package Dimensions | 7 mm x 7 mm |
| ژمارەی پین | 48 pins |
| جۆری دامەزراندن | Surface mount |
| Architecture | 32-bit RISC |
| Core Family | Arm Cortex-M4 |
| Product Series | STM32L4 |
| Power Class | Ultra-low-power |
| RoHS Compliance | RoHS3 compliant |
| REACH Compliance | REACH compliant |
| Moisture Sensitivity Level | MSL 3 |
ڕێنمایی ڕێکخستنی پینی STM32L431CCT6 7 mm x 7 mm
ڕێکخستنی پین بۆ STM32L431CCT6 (پاکێجی 7 mm x 7 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32L431CCT6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32L431CCT6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Hubs, Portable Measurement Devices, Connected Data Loggers, Compact Motor Controllers, Communication Equipment, Battery-Powered IoT Nodes.
Industrial Sensor Hubs
The STM32L431CCT6 fits industrial sensor hubs that need local acquisition, filtering, and event handling without sending every measurement to a remote system. Its Arm Cortex-M4 core operates at up to 80 MHz, while 256 KB of Flash provides room for firmware, calibration tables, and configuration data. The 48-LQFP package also offers a practical 7 mm by 7 mm surface-mount footprint for compact sensor assemblies. Place local decoupling close to the supply pins and validate the device-specific analog and communications resources against the sensor interface requirements.
پێشنیارکراو
Portable Measurement Devices
The STM32L431CCT6 is appropriate for portable measurement equipment where responsive signal processing and low-power behavior are both important. Its 80 MHz Cortex-M4 core can execute measurement control, filtering, and data formatting, while the STM32L4 family's low-power orientation supports battery-operated operation. The 256 KB Flash capacity can hold a bootloader and application firmware. Check the manufacturer power-mode currents and analog specifications for the actual sampling duty cycle rather than estimating battery life from processor frequency alone.
پێشنیارکراو
Connected Data Loggers
The STM32L431CCT6 can serve as the control core of a compact data logger that periodically samples sensors, stores records, and communicates through a serial or network interface. An 80 MHz processor leaves performance headroom for protocol handling, while 256 KB of Flash accommodates firmware and event metadata. Its 48-LQFP package simplifies assembly compared with very small leadless alternatives. Review the exact peripheral inventory and memory map to ensure the selected logger supports its storage medium and communications protocol.
پێشنیارکراو
Compact Motor Controllers
The STM32L431CCT6 can control compact motors, solenoids, and actuator subsystems where deterministic digital control and compact packaging are required. The 80 MHz Arm Cortex-M4 core supports responsive control-loop execution, and the 256 KB Flash capacity can retain motion parameters and application logic. The 7 mm by 7 mm LQFP package leaves room for external power conversion and driver circuitry. Confirm timer channels, encoder interfaces, motor-driver compatibility, and thermal margins in the manufacturer documentation before hardware release.
پێشنیارکراو
Communication Equipment
The STM32L431CCT6 is suitable for compact communication equipment that combines protocol processing, local control, and low-power operation. Its 80 MHz Cortex-M4 core can manage message handling and peripheral services, while 256 KB of Flash supports firmware and communication tables. The 48-LQFP package provides a practical balance between board area and assembly accessibility. Verify the required UART, SPI, I2C, USB, and other interface assignments in the exact pin-description table before selecting the part for a communications design.
پێشنیارکراو
Battery-Powered IoT Nodes
The STM32L431CCT6 supports battery-powered IoT nodes that must process local sensor information while minimizing energy use during idle periods. The STM32L4 family is explicitly described by STMicroelectronics as ultra-low-power, and the 80 MHz core provides enough performance for local filtering and event classification. Its 256 KB Flash can hold networking logic and application firmware, while the 48-LQFP package is convenient for compact assembled boards. Select the appropriate low-power mode and calculate average energy use from measured active and sleep currents.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32L431CCT6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32L432CCT6 | STM32L433CCT6 | STM32L431CCY6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) |
| Processor Core | Arm Cortex-M4 32-bit RISC | Arm Cortex-M4 32-bit RISC | Arm Cortex-M4 32-bit RISC | Arm Cortex-M4 32-bit RISC |
| Maximum Operating Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 256 KB (256K x 8 bits) | 256 KB | 256 KB | 256 KB |
| Power Class | Ultra-low-power | Ultra-low-power | Ultra-low-power | Ultra-low-power |
جیاکەرەوە سەرەکییەکان
- Retains an 80 MHz Cortex-M4 performance profile across the listed same-family alternatives (بەراورد بەSTM32L433CCT6)
- Matches the 256 KB Flash configuration of the principal family alternatives (بەراورد بەSTM32L432CCT6)
- Uses the same 48-LQFP 7 mm by 7 mm board footprint (بەراورد بەSTM32L431CCY6)
تێبینییەکانی دیزاین
Use the manufacturer 48-LQFP land pattern and pin-description table for the PCB library. Keep the footprint aligned with the package pin-1 indicator and verify every supply, ground, reset, clock, boot, debug, and peripheral connection. Place input and output decoupling capacitors close to their associated device pins and provide a short, low-impedance ground return. The LQFP format is comparatively accessible for rework, but its 0.5 mm lead pitch still requires careful inspection and assembly-process control.
Design the power tree around the exact supply limits, regulator topology, and current budget documented for the STM32L431CCT6. Separate analog, digital, and clock-supply routing where the device supports independent supplies, and avoid sharing high-current return paths with sensitive input traces. Verify brownout behavior, startup sequencing, and sleep-mode current in the final board configuration. Do not infer energy performance from the 80 MHz maximum frequency because actual consumption depends on operating mode, peripherals, and load.
Do not treat the STM32L431CCT6, STM32L432CCT6, or STM32L433CCT6 as interchangeable solely because they use the same LQFP outline. Compare boot configuration pins, oscillator options, peripheral pin mapping, clock limits, analog functions, and firmware device identifiers. A substitute that powers up but maps a peripheral differently can cause subtle field failures. Record the approved alternate part in firmware and production-test documentation only after a complete board-level validation.
Route high-speed clock and communication signals over continuous reference planes with short returns and avoid crossing split power-plane boundaries. Use series damping where clock-edge overshoot or ringing is observed, and keep debug or programming signals accessible for production testing. For sensor inputs, maintain separation from switching supplies and motor-driver return currents; a compact 7 mm by 7 mm package does not remove the need for careful analog partitioning on the PCB.
زانیاری پابەندبوون
The cross-reference product record identifies STM32L431CCT6 as RoHS3 compliant, REACH compliant, and MSL 3. Lead-free, halogen-free, conflict-minerals, and automotive qualification status are not established and remain unknown or not applicable.