STMicroelectronics

STM32L452CCU6 - 80MHz Cortex-M4 MCU | STMicroelectronics

MPN: STM32L452CCU6 ✓ چالاک
1.71 V to 3.6 V Vdss 22 nA Id 48-pin UFQFPN, 7 x 7 mm Package 80 MHz Speed 256 KB Memory
MOQ: 1 |

STM32L452CCU6 گشتی

The STMicroelectronics STM32L452CCU6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor, operating up to 80 MHz, with 256 KB of Flash memory in a 48-pin UFQFPN 7 x 7 mm package. Its 1.71 V to 3.6 V operating supply supports both 2.5 V and 3.3 V systems, while the -40 °C to +85 °C temperature range suits industrial and commercial equipment.

An ultra-low-power microcontroller is a compact embedded controller designed to balance processing performance, standby consumption, and low-power operation. The STM32L4 family combines a real-time Cortex-M4 core with low-power modes, analog peripherals, communication interfaces, and energy-conscious peripherals. This makes the family useful for battery-operated sensors, compact industrial controllers, and connected devices that must wake quickly and process data without a continuously active high-power processor.

The STM32L452CCU6 includes a Cortex-M4F core with floating-point hardware, 256 KB of Flash, and up to 100 DMIPS. According to the STMicroelectronics STM32L452xx manufacturer datasheet, the device supports a 1.71 V to 3.6 V power-supply range, five wakeup pins, and shutdown consumption as low as 22 nA. Its backup domain can draw 145 nA while retaining the real-time clock and 32 32-bit backup registers.

The architecture is designed around efficient embedded control rather than high-performance computing. Hardware low-power modes reduce activity during idle periods, while the Cortex-M4F instruction set accelerates control loops and digital signal processing. USB device support broadens its use in portable logging, configuration interfaces, and human-interface adapters. The 7 x 7 mm UFQFPN package also saves board area, although its exposed pad and fine-pitch leads require careful PCB layout and thermal management.

Typical uses include industrial sensor nodes, low-power data loggers, USB-connected measurement instruments, building automation controllers, portable medical accessories, and compact motor-control or condition-monitoring systems. The combination of 80 MHz processing, low-power shutdown modes, and a broad supply range supports designs that operate from regulated 3.3 V or 2.5 V rails.

PCB implementation should follow the manufacturer pinout and land-pattern guidance. Place decoupling capacitors close to the supply pins, keep high-current and sensitive analog routes separated, and provide continuous copper beneath the exposed thermal pad. Validate the final assembly across the expected temperature range and confirm clock, USB, and low-power behavior with representative production hardware.

This product page adds application guidance, same-package replacement analysis, comparison parameters, and practical PCB and power-management notes to the core technical information published by STMicroelectronics.

جێگرەوەکانی جێگۆڕکێ بۆ STM32L452CCU6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32L452CCU6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Flash Memory, Processor Core, SRAM.

STMicroelectronics
Package: 48-UFQFPN (7 x 7 mm)
Product Type: 32-bit ultra-low-power microcontroller
Flash Memory: 128 KB (128K x 8)
بەراوردکردن لەگەڵ STM32L452CCU6 →
STMicroelectronics
Processor Core: Arm Cortex-M4 with FPU
SRAM: 64 KB
بەراوردکردن لەگەڵ STM32L452CCU6 →
STMicroelectronics
Package: 48-UFQFPN, 7 x 7 mm
Processor Core: Arm Cortex-M4
بەراوردکردن لەگەڵ STM32L452CCU6 →
STMicroelectronics
Package: 48-pin UFQFPN (7 x 7 mm)
Product Type: 32-bit ultra-low-power microcontroller
SRAM: 160 KB
بەراوردکردن لەگەڵ STM32L452CCU6 →
STMicroelectronics
Product Type: 32-bit ultra-low-power microcontroller (MCU)
Flash Memory: 512 KB
SRAM: 160 KB
بەراوردکردن لەگەڵ STM32L452CCU6 →

STM32L452CEU6

✅ جێگرەوەی ڕاستەوخۆ
STMicroelectronics
📦 48-pin UFQFPN, 7 x 7 mm
32-bit ultra-low-power microcontroller · Arm Cortex-M4 with FPU · 80 MHz · 32-bit RISC · 100 DMIPS · 512 KB · 160 KB · 2.5 V / 3.3 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

STM32L462CEU6

✅ جێگرەوەی ڕاستەوخۆ
STMicroelectronics
📦 48-pin UFQFPN, 7 x 7 mm
32-bit ultra-low-power microcontroller (MCU) · Arm Cortex-M4 · 32-bit RISC · 80 MHz · Present · 100 DMIPS · 512 KB · 512K x 8 bits

پەیوەندی بۆ نرخ

بینینی داتاشیت →

STM32L433CCU6

✅ جێگرەوەی ڕاستەوخۆ
STMicroelectronics
📦 48-pin UFQFPN, 7 x 7 mm
Ultra-low-power 32-bit microcontroller · Arm Cortex-M4 with FPU · 32 bit · 80 MHz · 100 DMIPS · 256 KB · 64 KB · 1.71 V to 3.6 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

STM32L452CCU6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M4 with floating-point unit
Maximum CPU Frequency 80 MHz
Peak Core Performance 100 DMIPS
Flash Memory 256 KB
ڤۆڵتاژی دابینکردنی کارکردن 1.71 V to 3.6 V
Flash Organization 256K x 8 bits
پلەی گەرمیی کارکردن -40 °C to +85 °C
Shutdown Mode Current 22 nA
VBAT Mode Current 145 nA
Wakeup Sources 5 wakeup pins
Backup Registers 32 x 32-bit
RTC Backup Domain Real-time clock and backup registers maintained in VBAT mode
USB Interface USB device
پاکێج 48-pin UFQFPN, 7 x 7 mm
جۆری دامەزراندن Surface mount
Exposed Thermal Pad Present

ڕێنمایی ڕێکخستنی پینی STM32L452CCU6 48-pin ufqfpn, 7 x 7 mm

ڕێکخستنی پین بۆ STM32L452CCU6 (پاکێجی 48-pin ufqfpn, 7 x 7 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 48-pin ufqfpn, 7 x 7 mm بۆ STM32L452CCU6

هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32L452CCU6.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

STM32L452CCU6 گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Environmental Sensor Node, USB-Connected Data Logger, Industrial Condition Monitoring, Building Automation Controller, Portable Medical Accessory, Networked Industrial Sensor Hub.

🧩

Battery-Powered Environmental Sensor Node

The STM32L452CCU6 fits battery-powered environmental monitoring because its shutdown current can reach 22 nA while the backup domain draws 145 nA. The 80 MHz Cortex-M4F core can sample sensors, filter readings, and prepare wireless data during short active intervals, while the 1.71 V to 3.6 V operating range supports efficient 2.5 V and 3.3 V rail designs. Use one of the five documented wakeup paths to initiate periodic measurements, then return the device to a low-power state. Battery-life calculations should include sensor, radio, and regulator leakage because the MCU shutdown figure represents only one part of the complete sleep-current budget.

🖥️

USB-Connected Data Logger

The STM32L452CCU6 is appropriate for a USB-connected data logger because it combines an 80 MHz Cortex-M4F processor, 256 KB of Flash, and USB device support in a compact 48-pin UFQFPN package. The MCU can timestamp samples, maintain a local event buffer, format records, and expose them through a USB interface. Its 22 nA shutdown mode is useful when the logger is disconnected or idle, although USB attachment typically prevents the system from remaining in that state. Validate enumeration behavior, suspend current, clock accuracy, and bus-powered current limits on the production PCB.

🏭

Industrial Condition Monitoring

The STM32L452CCU6 supports industrial condition monitoring where an 80 MHz core can perform control calculations while the -40 °C to +85 °C rating covers typical equipment environments. The device can coordinate sensor acquisition, threshold evaluation, fault detection, and event logging while operating from a regulated 1.71 V to 3.6 V supply. For motor or vibration systems, keep analog inputs away from high-current switching paths and place filtering close to the MCU. Confirm the analog bandwidth, ADC accuracy, and peripheral assignments in the manufacturer documentation before selecting the device for a safety-critical monitoring function.

⚡

Building Automation Controller

The STM32L452CCU6 fits a building automation controller that must combine low-power operation with multiple communication and control functions. Its Cortex-M4F core can execute control logic, schedule tasks, and handle protocol processing, while the compact 7 x 7 mm UFQFPN package supports space-constrained control boards. The 1.71 V minimum supply improves compatibility with power rails that droop during system startup. Use a robust supply design, continuous ground beneath the exposed pad, and isolated routing for long external cable connections to improve immunity to industrial transients and ground potential differences.

💊

Portable Medical Accessory

The STM32L452CCU6 can serve as the control platform in a portable medical accessory that emphasizes low standby power, compact construction, and responsive control. The 80 MHz Cortex-M4F core can manage sensor sampling, user-interface states, and communications, while shutdown and backup modes reduce power when the device is inactive. The -40 °C to +85 °C range accommodates many ambient-controlled portable products, but clinical requirements may impose additional qualification and software-process obligations. Confirm electrical isolation, measurement accuracy, alarm behavior, and applicable product standards before clinical use.

🌐

Networked Industrial Sensor Hub

The STM32L452CCU6 is suitable for a networked industrial sensor hub when the design needs local computation without a high-power application processor. The 80 MHz core can aggregate measurements, perform protocol conversion, and update local status while the 256 KB of Flash stores firmware and configuration. Communication companion devices can extend the hub through Ethernet, RS-232, or RS-485 interfaces. Validate line protection, connector grounding, clock margins, and EMC performance at the system level because the MCU package itself does not determine industrial interface robustness.

What are the key specifications of STM32L452CCU6 that engineers should know?
The STM32L452CCU6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M4F core, a maximum operating frequency of 80 MHz, 256 KB of Flash, and a 48-pin UFQFPN package. According to the STMicroelectronics STM32L452xx manufacturer datasheet, its operating supply is 1.71 V to 3.6 V, the specified temperature range is -40 °C to +85 °C, and shutdown current can reach 22 nA. It also provides USB device support, making it suitable for low-power embedded control, measurement, and data-logging systems.
What is the operating voltage of STM32L452CCU6?
The STM32L452CCU6 operates from 1.71 V to 3.6 V. According to the STMicroelectronics STM32L452xx manufacturer datasheet, this range supports 2.5 V and 3.3 V embedded systems while preserving low-voltage operation in energy-sensitive applications. The selected regulator should maintain the supply within this range under transient loads, and PCB power planes should be sized for the maximum operating current required by the selected peripherals.
What is the maximum CPU frequency of STM32L452CCU6?
The STM32L452CCU6 operates at up to 80 MHz using its 32-bit Arm Cortex-M4F processor. The STMicroelectronics STM32L452xx manufacturer datasheet lists a peak performance of 100 DMIPS, combining general-purpose processing with hardware floating-point support. This frequency is suitable for responsive control loops, communication protocol handling, and moderate signal-processing workloads while allowing the design to use lower clock settings during low-power operation.
How much Flash and SRAM does STM32L452CCU6 have?
The STM32L452CCU6 contains 256 KB of Flash memory, arranged as 256K x 8 bits. The STMicroelectronics STM32L452xx manufacturer datasheet confirms the Flash capacity, but the exact SRAM allocation for this order code must be checked in the device memory map and product documentation before allocation is finalized. Designers should reserve space for the bootloader, application code, data, diagnostics, and future field updates when sizing firmware.
What package does STM32L452CCU6 use?
The STM32L452CCU6 uses a 48-pin UFQFPN package measuring 7 x 7 mm. According to the STMicroelectronics STM32L452xx manufacturer datasheet, the package includes an exposed thermal pad and fine-pitch leads for compact surface-mounted assemblies. PCB designers should use the manufacturer land pattern, maintain the specified copper and solder-mask clearances, and connect the exposed pad to the appropriate ground plane using a thermal-via pattern.
Where can I download the STM32L452CCU6 datasheet PDF?
The official STM32L452CCU6 datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32l452cc.pdf. The document contains the STM32L452xx device description, memory map, electrical characteristics, pin definitions, package drawings, and low-power operating information. Engineers should use the pin-description table and package outline in that document when assigning PCB nets and validating land-pattern geometry.
Where can I find the STM32L452CCU6 pinout?
The STM32L452CCU6 pinout is documented in the pin-description table of the STMicroelectronics STM32L452xx manufacturer datasheet. The device uses a 48-pin UFQFPN package, including its exposed thermal pad. Use that table to identify power, ground, reset, clock, debug, and peripheral functions before routing the PCB, and cross-check every net against the selected package drawing and pin-numbering convention.
Where can I buy STM32L452CCU6 online?
Use the Request a Quote form on this page to inquire about STM32L452CCU6 availability, order quantities, and delivery scheduling. The device is identified by STMicroelectronics as a 48-pin UFQFPN microcontroller with 256 KB of Flash and an 80 MHz Cortex-M4 core. A written quote provides the appropriate channel for confirming exact suffix, packaging, lead time, lot traceability, and shipment requirements before placing an order.
What is the price of STM32L452CCU6?
Submit the STM32L452CCU6 inquiry through the Request a Quote form on this page for current commercial terms. The quote should state the requested quantity, package or tray format, acceptable delivery date, and any traceability requirements. This approach keeps the order tied to the exact STM32L452CCU6 order code and allows procurement to confirm current supply, lot availability, and any quantity-break terms.
What is the lead time and stock status for STM32L452CCU6?
Request current stock, minimum order quantity, lead time, and production-lot information through the Request a Quote form on this page. STMicroelectronics identifies STM32L452CCU6 as an active 48-pin UFQFPN device, but delivery timing depends on order quantity, packaging, regional inventory, and manufacturing allocation. Confirming those points with the quotation response prevents schedule assumptions from being based on a generic product-page indication.
Is STM32L452CCU6 in stock?
Current STM32L452CCU6 stock is confirmed through the Request a Quote form on this page. Include the required quantity, tray quantity, target date, and shipment destination so the response reflects the appropriate package and supply allocation. For production planning, also request lot or date-code information and any traceability documents needed by the end customer or quality system.
STM32L452CCU6 vs STM32L452CEU6 - which is better for industrial control?
STM32L452CCU6 and STM32L452CEU6 share the STM32L452 family, 48-pin UFQFPN format, 80 MHz Cortex-M4F architecture, and 256 KB Flash configuration, but their temperature suffixes differ. The STM32L452CCU6 is specified for -40 °C to +85 °C, while STM32L452CEU6 extends the upper temperature rating by 20 °C to +105 °C. Choose the CEU6 when the enclosure can exceed 85 °C and its full temperature qualification is required.
Can STM32L433CCU6 replace STM32L452CCU6?
STM32L433CCU6 is a same-package STM32L4 candidate for STM32L452CCU6 because both use a 48-pin UFQFPN format and an 80 MHz Cortex-M4-class architecture with a 256 KB Flash configuration. According to the STMicroelectronics STM32L452xx manufacturer datasheet, the target also provides 1.71 V minimum operation and five wakeup pins. Firmware and PCB use should still be checked for peripheral-instance, timer, USB, ADC, clock, and startup differences before final substitution.
What can replace STM32L452CCU6?
The closest documented replacements for STM32L452CCU6 are STM32L452CEU6, STM32L462CEU6, and STM32L433CCU6, all associated with the same 48-pin UFQFPN class. The STM32L452CEU6 changes the upper temperature rating by 20 °C, while the L462 and L433 families require firmware-level validation of peripheral mappings and feature differences. Verify boot configuration, pin multiplexing, supply sequencing, USB behavior, and peripheral coverage before approving a replacement.
When should I choose STM32L452CCU6 over STM32L452CEU6?
Choose STM32L452CCU6 when the product is constrained to a -40 °C to +85 °C environment and does not require the extended temperature range. Choose STM32L452CEU6 when the upper operating temperature must reach 105 °C, a 20 °C increase over the CCU6 rating. For either device, verify the package footprint, exposed-pad connection, firmware support, and electrical limits before treating the choice as a drop-in design decision.
Is STM32L452CCU6 suitable for a battery-powered sensor node?
The STM32L452CCU6 is suitable for a battery-powered sensor node because its shutdown current can reach 22 nA and its VBAT mode current is 145 nA. The STMicroelectronics STM32L452xx manufacturer datasheet also identifies five wakeup pins for restoring operation from low-power states. Design the duty cycle around wake latency, sensor current, and radio activity because processor and peripheral active current determine whether the system achieves its intended battery life.

داتای سەرچاوەی ئەندازیاری بۆ STM32L452CCU6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose STM32L452CCU6 for a compact, low-power embedded design requiring an 80 MHz Cortex-M4F core, 256 KB of Flash, USB device connectivity, and operation from 1.71 V to 3.6 V. Its 48-pin UFQFPN package is appropriate when the product enclosure remains within -40 °C to +85 °C. Select STM32L452CEU6 when the same basic platform must operate to 105 °C, providing a 20 °C temperature-margin increase. Consider STM32L462CEU6 when its additional device features satisfy the application while preserving the same package, CPU-frequency class, and Flash capacity. STM32L433CCU6 is another same-package option with matched core frequency and Flash capacity, but peripheral availability and SRAM requirements must be checked. Regardless of the selected suffix, validate pin multiplexing, firmware support, clock settings, USB behavior, thermal performance, and low-power modes before production release.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە STM32L452CEU6 STM32L462CEU6 STM32L433CCU6
Package 48-pin UFQFPN, 7 x 7 mm 48-pin UFQFPN, 7 x 7 mm - same 48-pin UFQFPN, 7 x 7 mm - same 48-pin UFQFPN, 7 x 7 mm - same
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Maximum CPU Frequency 80 MHz 80 MHz 80 MHz 80 MHz
Flash Memory 256 KB 256 KB 256 KB 256 KB
Operating Temperature -40 °C to +85 °C -40 °C to +105 °C -40 °C to +105 °C -40 °C to +85 °C
Core Architecture Arm Cortex-M4F, 32-bit RISC Arm Cortex-M4F, 32-bit RISC Arm Cortex-M4F, 32-bit RISC Arm Cortex-M4F, 32-bit RISC
Operating Supply Voltage 1.71 V to 3.6 V 1.71 V to 3.6 V 1.71 V to 3.6 V 1.71 V to 3.6 V

جیاکەرەوە سەرەکییەکان

  • Lower upper temperature rating than the CEU6 alternative (بەراورد بەSTM32L452CEU6)
  • Same-package family alternative with matched processor speed (بەراورد بەSTM32L433CCU6)
  • Closest STM32L452 replacement with identical Flash and core frequency (بەراورد بەSTM32L462CEU6)

تێبینییەکانی دیزاین

Use the STMicroelectronics 48-pin UFQFPN land pattern and place the MCU close to its supply bypass capacitors. Put the recommended high-frequency ceramic capacitor directly across the nearest supply and ground pins, then connect the exposed thermal pad to ground with a short thermal-via array. Keep the pad connection electrically quiet and avoid routing high-current or switching signals beneath the package.

Estimated battery-current budget: if the MCU consumes 22 nA while shut down and 145 nA while the backup domain remains active, the MCU contributes 22 nA or 145 nA respectively before sensor, radio, regulator, and leakage currents are added. This calculation uses the datasheet shutdown and VBAT currents and is not a complete system sleep specification. Select the regulator and sensors around the dominant measured loads.

Separate analog inputs, external clock lines, and debug signals from high-current switching paths. Use a continuous ground plane, avoid split returns beneath the MCU, and keep crystal or clock circuitry close to its assigned pins with a short ground return. Validate USB signal integrity, boot configuration, and power sequencing on prototypes because software and layout errors can resemble device failures.

Do not assume that a same-package STM32L4 alternative is firmware-compatible without checking peripheral instances, interrupt vectors, timer channels, ADC channels, clock-tree settings, and boot behavior. Review the manufacturer datasheet for each exact suffix and run production-intent tests across temperature, supply, clock, USB, and low-power states before releasing a substitution.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The product is listed as an industrial-temperature STM32L4 microcontroller. Formal RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 statements should be confirmed for the exact order code through STMicroelectronics.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

STM32L452CCU6 STM32L452CCU6 datasheet STM32L452CCU6 datasheet pdf STM32L452CCU6 pinout STM32L452CCU6 equivalent STM32L452CCU6 replacement STM32L452CCU6 price STM32L452CCU6 stock STM32L452CCU6 schematic STM32L452CCU6 footprint STM32L452CCU6 vs STM32L452CEU6 STMicroelectronics STM32L452CCU6

پێکهاتە و زاراوە پەیوەندیدارەکان

STMicroelectronics STM32L452CCU6 STM32L452 STM32L452CEU6 STM32L462CEU6 STM32L433CCU6 Arm Cortex-M4F Arm Cortex-M4 ultra-low-power microcontroller 32-bit RISC core microcontroller embedded controller semiconductor UFQFPN-48 QFN family surface-mount package USB device 1.71 V to 3.6 V power supply 22 nA shutdown mode 145 nA VBAT mode 256 KB Flash 80 MHz 100 DMIPS RoHS REACH
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ