STM8L152C8U6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics
MPN: STM8L152C8U6 ✓ چالاکSTM8L152C8U6 گشتی
An ultra-low-power microcontroller is an integrated circuit optimized to minimize energy consumption during active operation, standby, and low-power modes. This makes it suitable for battery-operated equipment, portable measurement devices, industrial sensors, and consumer products whose duty cycle alternates between brief processing periods and extended idle periods. Within the embedded-control hierarchy, the STM8L152C8U6 combines CPU, memory, timers, analog conversion, and communications functions on one package.
The principal device characteristics include 64 KB of Flash program memory, 16 MHz maximum operating frequency, and operation across a 1.8 V to 3.6 V supply range. Integrated resources include an RTC, LCD interface, timers, USART, I2C, SPI, a 10-bit ADC, a DAC, comparators, and 1 KB of data EEPROM. These functions allow one controller to manage local sensing, display updates, communications, and timekeeping without requiring several discrete components.
The enhanced STM8 CPU core provides an 8-bit CISC architecture with dedicated peripherals for low-power and real-time control. Its combination of Flash memory, EEPROM, RTC, ADC, DAC, and communication interfaces is especially useful for compact control platforms in which board area and energy use are important. The UFQFPN package supports compact PCB layouts, although its exposed-pad thermal and assembly requirements must be considered carefully.
Typical applications include low-power sensor nodes, battery-powered instrumentation, compact industrial controllers, LCD-based user interfaces, meter-reading equipment, portable health devices, and connected sensing products. The 16 MHz processing rate and 64 KB memory capacity are suitable for moderate control workloads, protocol handling, data acquisition, and local configuration storage.
Designers should follow the manufacturer datasheet for the exact pin assignments, alternate-function selection, clock configuration, startup sequence, and decoupling requirements. The low-power operating modes should be validated with the intended system load and wake-up sources. PCB design must account for the exposed thermal pad, adequate copper area, controlled layout of analog and communication signals, and the manufacturer's recommended capacitor arrangement.
This product overview connects package, memory, interface, lifecycle, and application details with practical design guidance. It also distinguishes documented configuration differences among closely related STM8L152 variants, helping engineers determine whether a different ordering code or package can be used without assuming automatic drop-in compatibility.
جێگرەوەکانی جێگۆڕکێ بۆ STM8L152C8U6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM8L152C8U6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Timers, Data EEPROM, Flash Memory, Flash Organization.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەSTM8L152C8U6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit ultra-low-power microcontroller |
| CPU Core | Enhanced STM8 8-bit CISC core |
| Maximum CPU Frequency | 16 MHz |
| Flash Program Memory | 64 KB |
| Data EEPROM | 1 KB |
| SRAM | 4 KB |
| ڤۆڵتاژی دابینکردنی کارکردن | 1.8 V to 3.6 V |
| Nominal Supply Voltages | 1.8 V, 2.5 V, and 3.3 V |
| پاکێج | 48-pin UFQFPN, 7 x 7 mm |
| ژمارەی پین | 48 pins |
| Maximum Operating Temperature | 125 °C |
| RTC | Integrated real-time clock |
| LCD Interface | Integrated LCD interface |
| Communication Interfaces | USART, I2C, and SPI |
| ADC | Integrated 10-bit analog-to-digital converter |
| DAC | Integrated digital-to-analog converter |
| Comparators | Integrated analog comparators |
| Timers | Integrated timer resources |
| جۆری دامەزراندن | Surface mount |
| دۆخی RoHS | Compliant |
| دۆخی چرخەی ژیان | Active |
| ADC Resolution | 10 bit |
ڕێنمایی ڕێکخستنی پینی STM8L152C8U6 48-pin ufqfpn, 7 x 7 mm
ڕێکخستنی پین بۆ STM8L152C8U6 (پاکێجی 48-pin ufqfpn, 7 x 7 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM8L152C8U6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM8L152C8U6 گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Nodes, Compact Industrial Control Modules, LCD-Equipped Metering Devices, Portable Health and Wellness Devices, Data Acquisition and Environmental Monitoring, Compact Consumer and IoT Accessories.
Battery-Powered Sensor Nodes
The STM8L152C8U6 fits battery-powered sensor nodes because its ultra-low-power STM8 architecture combines 16 MHz processing with low-power operating modes in a compact 48-pin UFQFPN package. Its 10-bit ADC can acquire analog sensor readings, while the I2C and SPI interfaces can connect digital sensors and memory without adding separate interface controllers. The 64 KB Flash provides room for application firmware, calibration logic, and communication protocols, while 1 KB of EEPROM supports nonvolatile configuration storage. Power consumption should be evaluated across the actual measurement, processing, and sleep cycle because the complete duty cycle determines battery life.
پێشنیارکراو
Compact Industrial Control Modules
The STM8L152C8U6 is suitable for compact industrial control modules requiring a 16 MHz 8-bit controller, 64 KB of program memory, and numerous communication interfaces. USART can connect to a local operator interface, I2C can address sensors or configuration devices, and SPI supports higher-speed peripherals. The integrated comparators and ADC support process monitoring, while timers can handle periodic sampling or actuator control. Its 48-pin 7 x 7 mm UFQFPN construction reduces board area, but the exposed pad and analog signal layout require careful PCB design to support stable operation near process-control circuitry.
پێشنیارکراو
LCD-Equipped Metering Devices
The STM8L152C8U6 is well matched to metering devices that combine a local display with periodic data acquisition. Its integrated LCD interface reduces the need for a separate display controller, while the 10-bit ADC supports analog measurements and the RTC provides time information for logging and time-stamped events. At 16 MHz and with 64 KB of Flash, the device can organize measurement routines, display formatting, calibration tables, and serial data transfer. The 1.8 V to 3.6 V operating range also fits many compact battery-powered meter designs, although the exact LCD segment count and voltage requirements must be checked against the manufacturer documentation.
پێشنیارکراو
Portable Health and Wellness Devices
The STM8L152C8U6 can serve as the central controller in a portable health or wellness product combining low-power operation, analog measurement, and local data handling. The 10-bit ADC can process sensor signals, the DAC can support controlled analog output, and the comparators can handle simple threshold functions. USART, I2C, and SPI provide options for connecting a sensor module, external storage, or a host controller. Its 4 KB SRAM and 64 KB Flash support moderate buffering and firmware, while RTC functionality may assist with time-related records. Compliance requirements for a finished medical product remain separate from the MCU's component-level status and must be assessed for the complete system.
پێشنیارکراو
Data Acquisition and Environmental Monitoring
The STM8L152C8U6 supports environmental monitoring systems that periodically collect measurements and communicate results through a local network or host. The ADC handles analog inputs, while the timers can establish repeatable sampling intervals and the RTC can timestamp records. Serial and bus interfaces allow the same controller to manage sensor nodes, configuration storage, and a communications link. Its 64 KB Flash provides capacity for firmware and lookup data, and the low-power architecture is advantageous in remotely deployed equipment. For outdoor use, system-level ingress protection, calibration, temperature range, and power-source behavior must be validated even when the MCU itself supports operation up to 125 °C.
پێشنیارکراو
Compact Consumer and IoT Accessories
The STM8L152C8U6 fits compact consumer accessories and IoT nodes where an 8-bit controller must manage sensors, indicators, and serial connectivity within a small board area. Its 64 KB Flash accommodates protocol handlers and product logic, while the integrated ADC, DAC, comparators, and RTC reduce peripheral count. I2C and SPI can connect environmental or motion sensors, and USART can provide a bridge to another communications module. The 48-pin UFQFPN package supports dense layouts, but designers should reserve clean analog paths, provide stable supply decoupling, and verify startup behavior for each low-power mode before finalizing the production design.
پێشنیارکراو
داتای سەرچاوەی ئەندازیاری بۆ STM8L152C8U6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| CPU Architecture | Enhanced STM8 8-bit CISC core |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 64 KB |
| Data EEPROM | 1 KB |
| SRAM | 4 KB |
| Operating Supply Voltage | 1.8 V to 3.6 V |
| Package | 48-pin UFQFPN, 7 x 7 mm |
| Brand | STMicroelectronics |
| Communication Interfaces | USART, I2C, and SPI |
| Analog Resources | 10-bit ADC, DAC, and comparators |
| Time and Display Resources | RTC and LCD interface |
| Maximum Operating Temperature | 125 °C |
تێبینییەکانی دیزاین
Follow the manufacturer datasheet for the UFQFPN exposed-pad connection and recommended input and output capacitors. Place decoupling components close to their associated power pins, preserve a continuous return path beneath the device where recommended, and keep sensitive analog inputs away from high-current switching nodes. A 7 x 7 mm package leaves little room for error, so verify courtyard clearance, paste-land geometry, and exposed-pad solderability against the current package drawing.
The STM8L152C8U6 supports a 1.8 V to 3.6 V operating range, so the complete power tree must remain inside that interval during startup, active measurement, communication, and low-power transitions. Validate brownout behavior, regulator settling, and peripheral-specific voltage requirements using the manufacturer electrical characteristics. Do not assume that a nominal 3.3 V rail guarantees every peripheral or pin state; check absolute maximum and operating limits directly in the datasheet.
Do not substitute STM8L152C8T6, STM8L151C8U3, or another related ordering code solely because it belongs to the STM8L family. The package outline, numbered pin assignments, exposed-pad requirements, peripheral allocation, and clock configuration must match the target PCB. A related device with the same family name is a redesign candidate until a manufacturer package drawing and complete pin comparison confirm drop-in compatibility.
Route the ADC and comparator inputs away from digital clocks, LCD outputs, and communication edges. Use a compact ground reference near the analog pins, maintain short supply connections, and observe any analog-ground recommendations in the manufacturer application guidance. Because the device also supports USART, I2C, SPI, and LCD functions, establish a deliberate interface hierarchy during schematic partitioning so high-speed switching nodes do not share vulnerable return paths with precision measurements.
Low-power operation depends on correct clock, peripheral, and wake-up configuration. Test every operating mode used in the final product, including transitions during active communication and ADC conversion. Confirm wake sources, reset behavior, and retention expectations for RAM and peripheral registers. A benchmark based only on active current can be misleading when the real device spends most of its time in standby or another low-power state.
زانیاری پابەندبوون
RoHS compliance is identified for STM8L152C8U6. No component-level AEC-Q100 qualification, REACH declaration, halogen-free statement, lead-free statement, or conflict-minerals declaration is specified for the exact ordering code.