STM8L151C8U6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics
MPN: STM8L151C8U6 ✓ چالاکSTM8L151C8U6 گشتی
An ultra-low-power microcontroller is a semiconductor device designed to minimize energy consumption during active processing and low-power operation. Within the product hierarchy, the STM8L151C8U6 is an 8-bit MCU, a low-power microcontroller, and a member of the STM8L EnergyLite family of embedded processing devices. This positioning makes it suitable for battery-powered equipment in which duty-cycle efficiency, fast startup, and integrated peripherals can reduce the need for external components.
Key device characteristics include a maximum clock frequency of 16 MHz, 64 KB of programmable Flash, 4 KB of RAM as listed for this device, and 41 I/O ports. Its 1.8 V to 3.6 V operating supply range supports both 1.8 V and 3.3 V system rails. The 48-pin UFQFPN package exposes substantially more I/O than smaller STM8L packages while retaining a compact 7 x 7 mm footprint suitable for space-constrained industrial and consumer products.
The enhanced STM8 CPU core provides an 8-bit processing architecture optimized for control tasks rather than high-performance computing. Flash memory retains firmware when power is removed, while RAM supports working data and stack operations. The manufacturer identifies the STM8L15xx6 and STM8L15xx8 devices as ultra-low-power members of the STM8L platform; applications should therefore validate both active-current and standby-current requirements against the complete operating mode used in the final product.
Typical applications include low-power sensor controllers, compact industrial data-acquisition modules, battery-operated measurement instruments, connected IoT endpoints, compact motor-control products, and low-power communications equipment. The 41 available I/O ports are useful for digital interfaces, status indicators, control signals, and external peripheral connections, while the 16 MHz clock provides adequate throughput for typical embedded-control workloads.
The main design consideration is balancing low-power behavior, pin availability, and board density. Keep decoupling capacitors close to the supply pins, follow the UFQFPN exposed-pad and land-pattern requirements in the manufacturer documentation, and confirm that all connected peripherals remain compatible with the selected 1.8 V or 3.3 V supply. Review the complete pin-description table before assigning every exposed connection.
This page consolidates the manufacturer device overview, package and memory details, sourcing information, verified drop-in alternatives, comparison parameters, and practical integration guidance. It supports faster engineering selection while keeping procurement requests centralized through the Request a Quote form on this page.
جێگرەوەکانی جێگۆڕکێ بۆ STM8L151C8U6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM8L151C8U6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Communication Interfaces, Flash Memory, Timers, RAM.
STM8L152C8U6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM8L152C8U6TR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM8L151C8U6TR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM8L151C8U6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit ultra-low-power microcontroller |
| Product Family | STM8L EnergyLite |
| زۆرترین فرێکوێنسیی کاتژمێر | 16 MHz |
| Flash Memory | 64 KB |
| RAM | 4 KB |
| ڤۆڵتاژی دابینکردنی کارکردن | 1.8 V to 3.6 V |
| I/O Port Count | 41 ports |
| Total Pin Count | 48 pins |
| پاکێج | 48-UFQFPN (7 x 7 mm) |
| جۆری دامەزراندن | Surface Mount |
| CPU Architecture | Enhanced STM8 8-bit core |
| Program Memory Type | Flash |
| دۆخی چرخەی ژیان | Active |
ڕێنمایی ڕێکخستنی پینی STM8L151C8U6 48-ufqfpn (7 x 7 mm)
ڕێکخستنی پین بۆ STM8L151C8U6 (پاکێجی 48-ufqfpn (7 x 7 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM8L151C8U6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM8L151C8U6 گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Controller, Compact Industrial Data-Acquisition Module, Low-Power Communications Equipment, Battery-Operated Measurement Instrument, Compact Motor and Actuator Control, Energy-Smart Home and Building Node.
Battery-Powered Sensor Controller
The STM8L151C8U6 fits low-power sensor nodes because it combines a 16 MHz STM8 CPU core, 64 KB of Flash, and a 1.8 V to 3.6 V operating range in a compact 48-pin UFQFPN package. Its 41 I/O ports can connect digital sensors, switches, status indicators, and external wake-control signals without requiring a large microcontroller package. Place the MCU between the battery regulator and sensor interface, and use its low-power modes during idle periods. The 64 KB memory class provides room for protocol drivers and application logic, while the 4 KB RAM supports buffering and stack requirements. Battery-life validation should include sensor standby current and regulator quiescent current because the MCU alone does not determine total system consumption.
پێشنیارکراو
Compact Industrial Data-Acquisition Module
The STM8L151C8U6 is suitable for compact industrial measurement modules that need more I/O than a small-package MCU provides. Its 41 I/O ports can support digital inputs, alarm outputs, communication lines, and control signals, while 64 KB of Flash accommodates firmware for acquisition, filtering, and configuration. The 1.8 V to 3.6 V supply range allows integration with 1.8 V and 3.3 V sensor chains. Use the device beside the analog front end and isolate sensitive measurement paths from switching and high-current outputs. A 16 MHz clock provides useful processing headroom for protocol handling, but timing-critical sampling and filtering should be evaluated against the required measurement bandwidth and peripheral capabilities listed in the manufacturer datasheet.
پێشنیارکراو
Low-Power Communications Equipment
The STM8L151C8U6 can serve as the supervisory controller in compact communications equipment that combines a low-power MCU with an external radio or transceiver. The 64 KB Flash capacity supports firmware for packet handling, configuration storage, and device-state management, while the 48-pin package provides ample digital connections for a module interface. Its 1.8 V to 3.6 V supply range can align with common low-voltage transceiver rails, reducing the number of conversions in the design. Place the MCU near the module interface and keep switching or radio-supply routing separate from sensitive control traces. The actual communication throughput is determined by the external transceiver and firmware, so the MCU clock should be validated against the required protocol timing and interrupt load.
پێشنیارکراو
Battery-Operated Measurement Instrument
The STM8L151C8U6 suits handheld and portable measurement instruments where a compact controller, low-voltage operation, and firmware storage matter. The 16 MHz STM8 CPU core and 64 KB of Flash can implement control logic, calibration tables, and a local user interface, while 41 I/O ports support buttons, displays, indicators, and measurement-device control lines. Operating from 1.8 V to 3.6 V allows the controller to share a compatible low-voltage rail with selected peripherals. Use the device to coordinate measurement timing and power-state transitions rather than assuming it performs the analog conversion itself. Design the shutdown sequence carefully to preserve data and prevent current draw from accessories. A full battery-life estimate should include display, sensor, regulator, and communication subsystem consumption as well as MCU sleep current.
پێشنیارکراو
Compact Motor and Actuator Control
The STM8L151C8U6 can supervise compact motor and actuator systems where multiple control signals are needed but a high-performance processor would be excessive. Its 41 I/O ports are useful for direction signals, limit inputs, fault indicators, and external driver-control lines, while the 16 MHz clock can execute deterministic state-machine logic. The device should sit beside the motor driver and use its GPIO inputs for feedback rather than driving inductive loads directly. Keep motor current paths and switching nodes away from MCU traces, and provide local decoupling to prevent supply transients from disturbing the 1.8 V to 3.6 V controller rail. Validate stall current, driver fault response, and thermal behavior across the full actuator load before approving the design.
پێشنیارکراو
Energy-Smart Home and Building Node
The STM8L151C8U6 is applicable to low-energy building nodes that monitor contacts, switches, or sensors and communicate through an external module. The 48-pin UFQFPN package provides 41 I/O ports in a relatively small 7 x 7 mm footprint, allowing a node to consolidate several discrete inputs without becoming board-size constrained. Its low-voltage range supports 1.8 V and 3.3 V power architectures, while 64 KB of Flash is adequate for control and communications firmware. Configure unused inputs appropriately and use low-power operation to reduce maintenance energy in distributed installations. Because building systems can introduce long wiring and electrostatic transients, add the appropriate protection network and verify grounding, isolation, and regulatory requirements for the final installation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM8L151C8U6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM8L152C8U6 | STM8L152C8U6TR | STM8L151C8U6TR |
|---|---|---|---|---|
| Package | 48-UFQFPN (7 x 7 mm) | 48-UFQFPN (7 x 7 mm) - same | 48-UFQFPN (7 x 7 mm) - same | 48-UFQFPN (7 x 7 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB |
| Operating Supply Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| I/O Port Count | 41 ports | 41 ports | 41 ports | 41 ports |
| Security Features | STM8L151 standard configuration | STM8L152 hardware-security capabilities | STM8L152 hardware-security capabilities | STM8L151 standard configuration |
جیاکەرەوە سەرەکییەکان
- Larger I/O allocation in a compact package (بەراورد بەSTM8L151C6U6)
- Security-capable alternative within the same STM8L15xx footprint class (بەراورد بەSTM8L152C8U6)
- Direct ordering flexibility for reel assembly (بەراورد بەSTM8L151C8U6)
تێبینییەکانی دیزاین
Follow the exact 48-pin UFQFPN land pattern and exposed-pad connection defined by the STMicroelectronics package documentation. Place input and output decoupling capacitors close to their associated supply pins, use a continuous ground reference under the device where the footprint permits, and avoid placing test pads or tall components within the footprint boundary. Verify the PCB manufacturing library against the manufacturer drawing before release because generic QFN-48 libraries may not match the exposed-pad dimensions.
The STM8L151C8U6 operates from 1.8 V to 3.6 V, so the selected regulator must remain within that range under startup, load, and temperature conditions. Estimate the average and peak supply current using the selected MCU operating modes and attached peripherals, then include regulator efficiency and quiescent current in the system budget. Use local bulk and high-frequency decoupling to isolate transient loads from the MCU supply rail.
Do not treat the 41 I/O count as permission to assign every physical lead without checking the complete pin-description table; power, ground, reset, clock, and programming pins may not be general-purpose I/O. Also verify that the exposed pad has the required electrical connection. Before approving STM8L152 replacements, confirm that the additional security features do not change firmware assumptions, startup behavior, peripheral configuration, or qualification requirements.
Keep the 16 MHz clock path compact and follow the manufacturer layout recommendations for bypass and grounding. Separate analog, high-current, and communication return paths where practical to reduce coupling into sensitive control signals. For battery-powered designs, test sleep-mode current with the debugger removed or disabled because development hardware can dominate the measured standby consumption and conceal the behavior of the finished product.
زانیاری پابەندبوون
The available technical records identify the device as active but do not explicitly state its RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The STM8L151C8U6 is an MCU rather than an automotive-qualified variant based on the available ordering information.