Microchip Technology

SY88973VMG - 3.2Gbps CML Limiting Post Amplifier | Microchip

MPN: SY88973VMG ✓ چالاک
3.3 V or 5 V Vdss 16-MLF with exposed pad, 3 mm x 3 mm Package
MOQ: 1 |

SY88973VMG گشتی

The Microchip SY88973VMG is a 3.3V/5V CML low-power limiting post amplifier that operates up to 3.2 Gbps and is housed in a 16-MLF package with an exposed pad measuring 3 mm by 3 mm. It provides 38 dB differential gain, a 2 GHz 3 dB bandwidth, approximately 800 mV peak-to-peak CML output swing, and TTL-compatible loss-of-signal indication for optical receiver signal conditioning.

A limiting post amplifier is a high-speed amplifier stage that receives the linear output of a transimpedance amplifier and converts it into a clean, voltage-limited digital waveform. It belongs to the signal-conditioning hierarchy of optical receivers, alongside transimpedance amplifiers, clock-and-data-recovery devices, and laser drivers. Its main function is to restore usable signal amplitude after upstream amplification while limiting noise and overshoot before the signal reaches a serializer or clock-and-data-recovery circuit.

The SY88973VMG supports multi-rate operation to 3.2 Gbps from a 3.3V or 5V supply. Its differential gain is 38 dB, while the stated 2 GHz 3 dB bandwidth provides substantial frequency headroom above the highest supported data rate. Two CML data outputs are specified at approximately 800 mV peak-to-peak, and the device includes TTL loss-of-signal output for monitoring receiver health. These characteristics make it suitable for demanding fiber-optic links and other high-speed serial data paths.

Signal integrity is central to this device's operation. The specified output edge rate is 60 ps, random jitter is 5 ps RMS typical, and peak-to-peak jitter is 15 ps. These figures help bound the transition behavior introduced after the transimpedance amplifier. Because the SY88973VMG quantizes and limits the incoming signal, it reduces amplitude variation and noise before downstream digital circuitry, although system jitter remains dependent on the complete receiver chain.

Typical applications include 1.25 Gbps and 2.5 Gbps optical receivers operating in multi-rate systems, Gigabit Ethernet and synchronous digital network interfaces, and other optical transport links. The 3.3V/5V compatibility supports both legacy and newer transceiver architectures. The TTL loss-of-signal function is particularly useful when the supervising electronics need an indication that the incoming signal has fallen below a usable level.

PCB implementation should account for the exposed thermal pad and the demanding return path of high-speed differential signals. Place input and output decoupling capacitors close to their supply pins, provide a continuous ground reference beneath the package, and route the differential pair as a short impedance-controlled pair away from noisy digital and power-conversion circuitry. Check the exposed-pad connection and package outline against the manufacturer datasheet before releasing the layout.

This product page combines the manufacturer datasheet characteristics, exact ordering information, package details, and application-focused engineering guidance. It also distinguishes the verified operating limits from qualification, lifecycle, and commercial details that should be confirmed before a production release, helping engineers evaluate the SY88973VMG without relying on generic amplifier descriptions.

جێگرەوەکانی جێگۆڕکێ بۆ SY88973VMG — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

SY88973V

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 16-MLF (3x3 mm)
Same family rating of 3.2 Gbps and 38 dB differential gain; the base orderable code requires package-suffix and pin-assignment confirmation, with no listed core electrical difference

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

SY88973VMG زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type CML low-power limiting post amplifier
Supported Supply Voltage 3.3 V or 5 V
Maximum Data Rate 3.2 Gbps
Differential Gain 38 dB
3 dB Bandwidth 2 GHz
Output Interface CML
Number of CML Data Outputs 2 outputs
CML Output Swing 800 mV peak-to-peak
Loss-of-Signal Output TTL
Output Edge Rate 60 ps
Random Jitter 5 ps RMS typical
Peak-to-Peak Jitter 15 ps peak-to-peak
پاکێج 16-MLF with exposed pad, 3 mm x 3 mm
جۆری دامەزراندن Surface mount
Application Optical network fiber-optic receivers

ڕێنمایی ڕێکخستنی پینی SY88973VMG 16-mlf with exposed pad, 3 mm x 3 mm

ڕێکخستنی پین بۆ SY88973VMG (پاکێجی 16-mlf with exposed pad, 3 mm x 3 mm). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 16-mlf with exposed pad, 3 mm x 3 mm بۆ SY88973VMG

هیچ داتای وردی پینئاوت بەردەست نییە بۆ SY88973VMG.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

SY88973VMG گونجاوە بۆ 6 بەکارھێنانs: Multi-Rate Fiber-Optic Receiver, Gigabit Ethernet Optical Interface, 2.5 Gbps Synchronous Data Link, Optical Transport Network Equipment, High-Speed Serial Signal Conditioner, Optical Receiver Health Monitoring.

🌐

Multi-Rate Fiber-Optic Receiver

The SY88973VMG fits immediately after a transimpedance amplifier in a multi-rate optical receiver because it accepts the TIA's linear output and converts it into a limited digital waveform. Its specified operation to 3.2 Gbps supports receiver architectures that must accommodate more than one legacy rate, including 1.25 Gbps and 2.5 Gbps links. The 38 dB differential gain and approximately 800 mV peak-to-peak CML swing restore a usable signal level, while the 60 ps edge rate preserves rapid transitions. Designers should still verify amplitude, jitter, and loss-of-signal timing against the complete receiver architecture.

🌐

Gigabit Ethernet Optical Interface

The SY88973VMG is suitable for the receive-side signal-conditioning path of a Gigabit-class optical interface because its 2 GHz 3 dB bandwidth exceeds the signaling requirements of a 1.25 Gbps link. The device operates from 3.3V or 5V, allowing integration with transceiver logic operating on either supply rail. Its two CML data outputs provide approximately 800 mV peak-to-peak levels, and the TTL loss-of-signal output gives supervisory circuitry a direct receiver-status indication. Board implementation should preserve a continuous return path and keep the differential traces tightly coupled.

🖥️

2.5 Gbps Synchronous Data Link

The SY88973VMG can condition a 2.5 Gbps signal when the design requires a dedicated limiting stage after a transimpedance amplifier. Its maximum 3.2 Gbps rate provides 0.7 Gbps of stated rate headroom, while its 2 GHz 3 dB bandwidth is substantially higher than the link rate. The specified 5 ps RMS typical random jitter and 60 ps edge rate help characterize the waveform delivered to downstream digital circuitry. Exact eye margin and BER performance remain system-level results that depend on the TIA, optical channel, clocking, and interconnects.

🏭

Optical Transport Network Equipment

The SY88973VMG is applicable within optical transport equipment that receives high-speed data from a transimpedance amplifier and requires standardized CML levels. Supporting both 3.3V and 5V supplies allows the part to fit systems with different line-card power architectures. The 800 mV peak-to-peak output swing reduces dependence on variable TIA amplitude, and the TTL loss-of-signal output supports link monitoring and fault management. For equipment with strict temperature, qualification, or compliance requirements, verify those details with Microchip for the exact orderable suffix before production release.

⚡

High-Speed Serial Signal Conditioner

The SY88973VMG can serve as a dedicated signal-conditioning element in high-speed serial links where the incoming waveform requires amplitude limiting before a digital decision circuit. Its 38 dB differential gain restores signal level, and its operation to 3.2 Gbps accommodates fast data paths beyond common lower-speed serial standards. The CML output topology and approximately 800 mV peak-to-peak swing are appropriate for receiver-side logic designed around differential signaling. PCB designers must account for the exposed pad and use short, impedance-controlled routes between the preceding amplifier and the SY88973VMG inputs.

🔧

Optical Receiver Health Monitoring

The SY88973VMG supports optical receiver health monitoring through its dedicated TTL loss-of-signal output. This indication can be connected to transceiver control logic to identify a receiver condition in which the input amplitude is below the usable detection threshold. The amplifier operates at up to 3.2 Gbps and provides two 800 mV peak-to-peak CML data outputs, allowing monitoring to coexist with the primary data path. Validate the loss-of-signal threshold, polarity, and timing against the manufacturer datasheet because they form part of the receiver control sequence.

کورتەی بەرهەمە پێشنیارکراوەکان

SY88973VMG Microchip Technology بەکارهێنراوە لە: Multi-Rate Fiber-Optic Receiver, Gigabit Ethernet Optical Interface, 2.5 Gbps Synchronous Data Link, Optical Transport Network Equipment, High-Speed Serial Signal Conditioner, Optical Receiver Health Monitoring SY88973V Same-family device covered by the manufacturer datasheet بەکارهێنراوە لە: Multi-Rate Fiber-Optic Receiver, Gigabit Ethernet Optical Interface, 2.5 Gbps Synchronous Data Link, Optical Transport Network Equipment, High-Speed Serial Signal Conditioner, Optical Receiver Health Monitoring
What is the SY88973VMG?
The SY88973VMG is a 3.3V/5V CML low-power limiting post amplifier designed for fiber-optic receivers. According to the manufacturer datasheet, it supports operation up to 3.2 Gbps, provides 38 dB differential gain, and includes approximately 800 mV peak-to-peak CML outputs together with a TTL loss-of-signal output. It is packaged in a 16-MLF 3 mm by 3 mm package with an exposed pad.
What is the maximum data rate of the SY88973VMG?
The SY88973VMG supports data rates up to 3.2 Gbps. According to the manufacturer datasheet, the device is a multi-rate limiting post amplifier designed to follow a transimpedance amplifier in an optical receiver. Its stated 2 GHz 3 dB bandwidth provides frequency headroom above the maximum supported signaling rate, while the 60 ps output edge rate enables rapid waveform transitions.
What supply voltage does the SY88973VMG require?
The SY88973VMG operates from either a 3.3V or 5V supply. According to the manufacturer datasheet, the device is a single-supply, low-power limiting post amplifier intended for high-speed optical receiver signal conditioning. Its CML outputs provide approximately 800 mV peak-to-peak swing, while the separate TTL loss-of-signal output allows receiver-status monitoring without requiring a CML receiver for that function.
Where can I download the SY88973VMG datasheet PDF?
The manufacturer datasheet PDF is available through Microchip's DeviceDoc link for the SY88973V family, which includes the SY88973VMG. Use the pin-description table, electrical-characteristics tables, and package drawings in that document when assigning PCB nets and verifying operating limits. The document is the appropriate source for the complete 16-pin assignment and exposed-pad connection.
Where is the SY88973VMG pinout?
The SY88973VMG pinout is documented in the manufacturer datasheet for the SY88973V family. The device uses a 16-MLF package with an exposed pad, and its connections include the differential input, CML data outputs, supply, ground, and TTL loss-of-signal function. Use the pin-description table in the datasheet to assign nets and confirm which package pins connect to the exposed thermal pad.
How does the SY88973VMG improve an optical receiver signal?
The SY88973VMG limits and re-quantizes the noisy, variable-amplitude output of a transimpedance amplifier. According to the manufacturer datasheet, the device produces typically 800 mV peak-to-peak voltage-limited CML waveforms with 60 ps edge rates. This restores signal amplitude and provides a standardized waveform for a serializer or clock-and-data-recovery circuit while limiting excessive amplitude excursions.
What are the key specifications of the SY88973VMG that engineers should know?
The principal SY88973VMG specifications are 3.2 Gbps operation, 3.3V/5V supply compatibility, 38 dB differential gain, 2 GHz 3 dB bandwidth, and 800 mV peak-to-peak CML output swing. The manufacturer datasheet also specifies 60 ps edge rates, 5 ps RMS typical random jitter, 15 ps peak-to-peak jitter, a TTL loss-of-signal output, and a 16-MLF 3 mm by 3 mm package.
Can the SY88973VMG be used in a multi-rate optical receiver?
Yes, the SY88973VMG is explicitly described as a multi-rate limiting post amplifier operating up to 3.2 Gbps. According to the manufacturer datasheet, it is intended for use after a transimpedance amplifier in fiber-optic receivers. Its 2 GHz 3 dB bandwidth and 3.3V/5V operation allow it to support receiver architectures spanning legacy 1.25 Gbps and 2.5 Gbps signaling as well as higher-rate links.
What can replace the SY88973VMG?
The closest same-family replacement identified is the SY88973V, which is covered by the same manufacturer datasheet and retains the 3.2 Gbps CML limiting-post-amplifier function. Before accepting it as a drop-in replacement, confirm the exact package suffix, pin assignment, exposed-pad connection, and production ordering code. No directly confirmed cross-brand, pin-compatible replacement is established by the available cross-reference information.
Is the SY88973V the same as the SY88973VMG?
The SY88973V and SY88973VMG belong to the same Micrel and Microchip limiting-post-amplifier family and share the core 3.3V/5V, 3.2 Gbps CML specification. Their orderable suffixes still need confirmation for mechanical interchangeability, particularly the MLF package code, exposed-pad layout, and tape-and-reel ordering details. Treat the SY88973V as a same-family candidate until those package details are verified against the manufacturer datasheet.
SY88973VMG vs SY88973V — which is better for an optical receiver?
The SY88973V is the better replacement candidate when its exact suffix confirms the same 16-MLF footprint and pin assignments as the SY88973VMG. Both devices use the SY88973V datasheet family and provide the same core 3.2 Gbps CML limiting-post-amplifier function. For a new design, choose the exact orderable code confirmed by Microchip for the required packaging and production status rather than relying only on the base family name.
When should I choose the SY88973VMG instead of a generic limiting amplifier?
Choose the SY88973VMG when a fiber-optic receiver needs a specifically documented 3.2 Gbps CML post-amplifier with 38 dB differential gain, 2 GHz 3 dB bandwidth, and TTL loss-of-signal indication. It is especially suitable when the circuit follows a transimpedance amplifier and requires a limited 800 mV peak-to-peak waveform. A generic amplifier should be selected only if its entire data rate, jitter, supply, and pin specifications are independently verified.
Is the SY88973VMG suitable for 2.5 Gbps and 1.25 Gbps optical links?
Yes, the SY88973VMG supports multi-rate operation and can be used below its 3.2 Gbps maximum rate, including 2.5 Gbps and 1.25 Gbps optical-link applications. According to the manufacturer datasheet, the device follows a transimpedance amplifier and limits its output into a CML waveform. Final operation must also satisfy the receiver's voltage, jitter, bandwidth, and loss-of-signal requirements.
Where can I buy the SY88973VMG and what is its lead time?
Use the Request a Quote form on this page to ask for SY88973VMG availability, current lead time, and minimum order quantity. The form routes the request without embedding a stale commercial figure in the technical page. For production planning, also confirm the package suffix, delivery packaging, and lifecycle status when the supplier acknowledges the request.
Is the SY88973VMG in stock and how much does it cost?
Current stock and a current unit price for the exact SY88973VMG should be requested through the Request a Quote form on this page. The request should identify the 16-MLF 3 mm by 3 mm orderable configuration and required shipment quantity. Because inventory and commercial terms can change, use the supplier's acknowledgment for the final availability, lead time, and quotation.

داتای سەرچاوەی ئەندازیاری بۆ SY88973VMG — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the SY88973VMG when an optical receiver needs a documented limiting post amplifier operating up to 3.2 Gbps from a 3.3V or 5V rail. Its 38 dB differential gain, 2 GHz 3 dB bandwidth, 800 mV peak-to-peak CML outputs, and TTL loss-of-signal indication make it suitable for restoring a transimpedance-amplifier output before clock-and-data recovery or serialization. The SY88973V is the closest same-family candidate when its exact orderable suffix confirms the same 16-MLF footprint and pin assignments; it offers the same core rate and gain ratings but still requires mechanical verification. Do not select a cross-brand substitute solely from data-rate and bandwidth similarities because CML output levels, input termination, loss-of-signal polarity, exposed-pad construction, and pin assignments must also match. For new production designs, obtain the exact Microchip orderable code and current lifecycle information before freezing the schematic and PCB.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە SY88973V
Package 16-MLF with exposed pad, 3 mm x 3 mm 16-MLF with exposed pad, 3 mm x 3 mm
Brand Microchip Technology Microchip Technology
Product Type CML low-power limiting post amplifier CML low-power limiting post amplifier
Maximum Data Rate 3.2 Gbps 3.2 Gbps
Supply Voltage 3.3 V or 5 V 3.3 V or 5 V
Differential Gain 38 dB 38 dB
3 dB Bandwidth 2 GHz 2 GHz
CML Output Swing 800 mV peak-to-peak 800 mV peak-to-peak
Output Edge Rate 60 ps 60 ps
Random Jitter 5 ps RMS typical 5 ps RMS typical
Peak-to-Peak Jitter 15 ps peak-to-peak 15 ps peak-to-peak
Loss-of-Signal Interface TTL TTL

جیاکەرەوە سەرەکییەکان

  • High-rate limiting function in a compact exposed-pad package (بەراورد بەSY88973V)
  • Specified high-speed output characteristics (بەراورد بەSY88973V)
  • Integrated receiver-status reporting (بەراورد بەSY88973V)

تێبینییەکانی دیزاین

Route the differential input and CML outputs as short, impedance-controlled pairs with a continuous reference plane. Keep the input pair away from switching-regulator nodes, clock lines, and other high-current paths. Place the decoupling capacitors close to the device's supply and ground pins, and avoid adding test-point stubs that create discontinuities in the controlled-impedance path.

Connect the exposed pad to the ground plane using the manufacturer-recommended layout and thermal-via arrangement. The exposed pad provides the principal path for heat removal from the 16-MLF package. Keep the return-current path continuous beneath the device because the pad is both a thermal feature and part of the high-speed reference environment. Verify junction-temperature requirements against the actual supply voltage, data activity, and ambient temperature.

Do not treat the 3.2 Gbps rating as proof that every receiver will operate successfully at that rate. Verify the complete chain of transimpedance amplifier gain, input amplitude, clock quality, channel loss, jitter budget, and downstream input sensitivity. Also use the manufacturer pin-description table for the exact 16-MLF suffix, especially the exposed-pad connection and TTL loss-of-signal orientation.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status must be confirmed for the exact SY88973VMG orderable suffix with the manufacturer. The product is an industrial high-speed integrated circuit, but no specific AEC-Q100 qualification claim is established here.

داتا پشتڕاستکراوەتەوە لە: 2026-11-20 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

SY88973VMG datasheet SY88973VMG specifications SY88973VMG pinout SY88973VMG datasheet pdf SY88973VMG 3.2Gbps amplifier SY88973VMG CML output SY88973VMG 16-MLF package SY88973VMG optical receiver SY88973VMG vs SY88973V SY88973VMG equivalent SY88973VMG replacement SY88973VMG price SY88973VMG stock Microchip SY88973VMG SY88973VMG TTL LOS

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology Micrel Semiconductor SY88973VMG SY88973V limiting post amplifier special-purpose amplifier amplifier IC semiconductor CML low-power limiting amplifier fiber-optic receiver transimpedance amplifier optical network multi-rate operation differential gain 3 dB bandwidth output edge rate random jitter peak-to-peak jitter TTL loss of signal 16-MLF package QFN family surface mount 3.2 Gbps 3.3 V
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ