Texas Instruments

TAS5518PAGR - 8-Channel Digital Audio PWM Processor | Texas Instruments

MPN: TAS5518PAGR ✓ چالاک
3 V to 3.6 V Vdss 64-pin TQFP (PAG), 10 x 10 mm Package
MOQ: 1 |

TAS5518PAGR گشتی

Texas Instruments TAS5518PAGR is an eight-channel digital audio PWM processor with a typical system dynamic range of 110 dB, PSVC support for up to 24 dB of additional dynamic range, and a 64-pin TQFP package measuring 10 x 10 mm. It accepts digital audio data and generates PWM drive signals for eight Class-D amplifier channels.

A digital audio PWM processor is a mixed-signal audio IC that combines digital control, modulation, and output-driver functions in one device. It sits between an audio source, such as a digital audio interface or decoder, and power-amplifier stages. The TAS5518 integrates channel volume control, modulation, and system-level audio management to reduce the number of external discrete components required by multichannel audio systems.

Principal features include eight audio channels, a 110 dB typical dynamic range in a well-designed system, and a power supply volume control feature that can contribute up to 24 dB of additional dynamic range at normal listening levels. Its 3 V to 3.6 V operating supply range supports integration with common low-voltage digital audio platforms, while the 64-pin TQFP package provides adequate routing density for eight-channel outputs.

The architecture is designed to preserve audio quality while concentrating channel-level processing and PWM generation on one IC. Digital command and control information can be used to configure the multichannel system, and the PSVC function provides additional headroom relative to a fixed system operating level. This makes the processor useful where channel imbalance, small-signal dynamic-range limitations, or the cost of multiple external control paths would otherwise constrain the design.

Typical uses include powered speakers, sound bars, home-theater receivers, active speaker networks, automotive audio systems, and other consumer or professional products requiring multiple Class-D amplifier channels. A practical implementation must preserve clean digital and analog ground returns, decouple the supply close to the device, and route high-current PWM outputs as controlled-impedance signals rather than treating them as ordinary low-frequency logic nets.

Careful PCB partitioning is essential because the device combines digital control with timing-sensitive PWM outputs. Keep communication traces away from output nodes, use the manufacturer-recommended power and ground layout, and provide adequate copper around exposed thermal and power-distribution structures. Confirm the external clock, serial interface, and reset implementation against the manufacturer datasheet before releasing the PCB.

This product page combines the manufacturer device description, package and channel details, lifecycle information, drop-in replacement assessment, application guidance, and practical layout considerations. It is intended to help engineers evaluate the TAS5518PAGR for multichannel digital-audio architectures and compare it with identified same-family devices without obscuring package or feature differences.

جێگرەوەکانی جێگۆڕکێ بۆ TAS5518PAGR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ TAS5518PAGR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Number of Audio Channels, Product Type, Control Interface.

Texas Instruments
Number of Audio Channels: 4 channels
Product Type: 4-channel digital audio PWM processor
Control Interface: I2C
بەراوردکردن لەگەڵ TAS5518PAGR →
Texas Instruments
Number of Audio Channels: 4 channels
Product Type: 4-channel digital audio PWM processor
Control Interface: I2C
بەراوردکردن لەگەڵ TAS5518PAGR →
Texas Instruments
Number of Audio Channels: 8 channels
Product Type: 8-channel digital audio PWM processor
بەراوردکردن لەگەڵ TAS5518PAGR →

TAS5518CPAG

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 TQFP-64 (PAG), 10 x 10 mm
Texas Instruments · 8-channel digital audio PWM processor · 8 channels · Digital audio PWM processing · 64-pin TQFP · 10 mm x 10 mm · 64 pins · Surface mount

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TAS5518PAG

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 TQFP-64 (PAG), 10 x 10 mm
8-channel digital audio PWM processor · 8 channels · 110 dB · Up to 24 dB · 64-pin TQFP (PAG), 10 x 10 mm · 64 pins · Surface mount · Audio modulator / audio special purpose

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TAS5518PAGR زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-channel digital audio PWM processor
Number of Audio Channels 8 channels
Typical System Dynamic Range 110 dB
PSVC Additional Dynamic Range Up to 24 dB
Supply Voltage Range 3 V to 3.6 V
Output Modulation Digital PWM
Control Interface I2C, serial
پاکێج 64-pin TQFP (PAG), 10 x 10 mm
جۆری دامەزراندن Surface mount
مەودای پلەی گەرمیی کارکردن 0 °C to 70 °C
Total Pin Count 64 pins

ڕێنمایی ڕێکخستنی پینی TAS5518PAGR 64-pin tqfp (pag), 10 x 10 mm

ڕێکخستنی پین بۆ TAS5518PAGR (پاکێجی 64-pin tqfp (pag), 10 x 10 mm). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 64-pin tqfp (pag), 10 x 10 mm بۆ TAS5518PAGR

هیچ داتای وردی پینئاوت بەردەست نییە بۆ TAS5518PAGR.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

TAS5518PAGR گونجاوە بۆ 6 بەکارھێنانs: Powered Speaker Networks, Home-Theater Audio Systems, Sound Bars and Compact Audio Products, Automotive Audio Head Units, Professional Multi-Channel Amplifiers, USB and Network Audio Speakers.

🎧

Powered Speaker Networks

The TAS5518PAGR is well suited to powered speakers requiring eight digital PWM audio channels in one signal-chain component. Its eight-channel architecture consolidates channel processing and modulation while the documented 110 dB typical system dynamic range supports high-quality reproduction. The PSVC function can contribute up to 24 dB of additional dynamic range at normal listening levels. Designers should use the manufacturer pin and layout guidance, keep PWM routing isolated from control traces, and confirm that the downstream amplifier stage accepts the processor's timing and signal levels.

🏠

Home-Theater Audio Systems

A home-theater receiver or powered sound-bar platform can use the TAS5518PAGR to manage and modulate multiple audio channels from a digital source. The processor's 3 V to 3.6 V supply range fits common low-voltage digital audio systems, while eight channels reduce the need for separate modulator ICs. The documented 110 dB typical system dynamic range and PSVC capability support a broad listening range. Board implementation should account for PWM return-current paths, uninterrupted ground planes, local supply bypassing, and clean isolation from the digital control and clock routes.

📺

Sound Bars and Compact Audio Products

The TAS5518PAGR is appropriate for sound bars and compact powered-audio products where eight channels provide more flexibility than a small integrated amplifier can offer. Its integrated PWM processing supports a compact system architecture, and PSVC can add up to 24 dB of dynamic range at normal listening levels. Mechanical space is not the only layout constraint: high-current PWM outputs require short return paths and careful separation from control signals. Use the 10 x 10 mm, 64-pin TQFP footprint and follow the manufacturer's recommended layer stacking and component-placement guidance.

🚗

Automotive Audio Head Units

The TAS5518PAGR can support multichannel automotive audio architectures that require centralized digital audio modulation. Its eight-channel organization and PSVC function address channel-level dynamic-range requirements, while the 0 °C to 70 °C ordering range supports commercial ambient conditions. The exact vehicle qualification requirements should not be inferred from that temperature range. Before production use, review the AEC-Q100 status, electromagnetic-interference requirements, automotive supply-quality requirements, and thermal design in the manufacturer documentation.

🔊

Professional Multi-Channel Amplifiers

Professional powered-amplifier and installation-speaker products can use the TAS5518PAGR when a host controller requires eight synchronized digital PWM channels. The processor's typical 110 dB system dynamic range offers useful signal-chain headroom, while PSVC can preserve perceived dynamic range at reduced listening levels. Its implementation must be coordinated with the power stage because PWM timing, output configuration, and grounding determine audible and electromagnetic performance. Validate the complete reference design, filtering strategy, thermal margin, and output-routing rules rather than treating the processor as a standalone audio amplifier.

🌐

USB and Network Audio Speakers

The TAS5518PAGR can serve as the PWM-processing section of a USB or network audio speaker that converts digital program material into eight Class-D drive signals. Its I2C, serial control capability supports integration with a system controller, and PSVC adds dynamic-range flexibility across quiet and loud content. The processor does not perform source decoding or USB communication itself, so those functions must be supplied by the host system. Designers should enforce clocking and interface-timing requirements from the datasheet and keep communication routing away from the switching outputs.

What is the Texas Instruments TAS5518PAGR?
The Texas Instruments TAS5518PAGR is an eight-channel digital audio PWM processor designed for multichannel Class-D audio systems. According to the manufacturer datasheet, the device provides eight PWM output channels and a typical system dynamic range of 110 dB in a well-designed system. It is packaged in a 64-pin TQFP measuring 10 x 10 mm and operates from a 3 V to 3.6 V supply.
What are the key specifications of TAS5518PAGR that engineers should know?
The TAS5518PAGR combines eight digital audio PWM channels, a typical system dynamic range of 110 dB, and PSVC operation that can provide up to 24 dB of additional dynamic range. According to the manufacturer datasheet, its operating supply range is 3 V to 3.6 V. The device uses an I2C, serial control interface and is offered in a 64-pin TQFP package measuring 10 x 10 mm.
What is the PSVC feature in the TAS5518PAGR?
The TAS5518PAGR power supply volume control, or PSVC, feature can provide up to 24 dB of additional dynamic range at normal listening levels. According to the manufacturer datasheet, the device achieves a typical dynamic range of 110 dB in a well-designed system. PSVC is useful in multichannel audio products where signal levels vary between quiet passages and high-level program material.
Which applications are suitable for TAS5518PAGR?
The TAS5518PAGR suits powered speakers, sound bars, home-theater receivers, active speaker systems, automotive audio equipment, and other multichannel Class-D products. Its eight-channel architecture reduces the number of separate audio processors needed in these systems. The 110 dB typical system dynamic range and PSVC capability support high-quality reproduction across quiet and loud program material.
Where can I download the TAS5518PAGR datasheet PDF?
The official TAS5518PAGR datasheet can be downloaded from the Texas Instruments datasheet link on this page. According to the manufacturer documentation, the PDF describes the eight-channel PWM architecture, 110 dB typical system dynamic range, PSVC operation, electrical characteristics, pin configuration, and application information. Use the manufacturer version for design sign-off and PCB implementation.
Where can I find the TAS5518PAGR pinout?
The TAS5518PAGR pinout is documented in the manufacturer datasheet under the pin configuration and terminal descriptions. The device has 64 pins in a 10 x 10 mm TQFP package. Use the numbered package drawing to assign power, ground, digital control, clock, and PWM output connections before creating the PCB footprint and symbol.
What is the difference between TAS5518PAGR and TAS5518PAG?
TAS5518PAGR and TAS5518PAG identify variants in the same Texas Instruments TAS5518 family, with the available comparison information describing consistent terminals, package characteristics, and principal performance parameters. The R suffix distinguishes the orderable packaging variant used by TAS5518PAGR. Confirm reel orientation, temperature grade, and ordering information in the manufacturer part-details table before substitution.
Can TAS5518CPAG replace TAS5518PAGR in an existing design?
TAS5518CPAG is identified as a complete replacement for TAS5518PAGR because its principal performance parameters, functional characteristics, terminals, and package are consistent. The replacement assessment does not remove the need for a final board-level audit. Confirm the exact 64-pin PAG land pattern, operating-temperature grade, supply sequencing, and interface behavior against both manufacturer datasheets.
When should I choose TAS5518PAGR over TAS5518CPAG?
Choose TAS5518PAGR when its specified order code, temperature range, and reel configuration match the production BOM and supply plan. Choose TAS5518CPAG when it offers the required sourcing or qualification advantage and its manufacturer documentation confirms equivalent electrical behavior and pin compatibility. Both devices are identified for complete replacement, so the decision should focus on ordering, lifecycle, and qualification requirements.
Is TAS5518PAGR suitable for a powered multiway speaker?
The TAS5518PAGR is suitable for a powered multiway speaker that requires eight digital PWM audio channels. According to the manufacturer datasheet, the processor operates from 3 V to 3.6 V and provides a typical system dynamic range of 110 dB in a well-designed system. The host amplifier stage must be designed for compatible PWM input timing and output-drive requirements.
How should I lay out the TAS5518PAGR PCB?
Route the TAS5518PAGR according to the manufacturer PCB-layout guidance, separating high-current PWM outputs from sensitive communication and clock traces. Place supply-decoupling components close to the relevant pins, maintain a continuous return path, and use the recommended ground and power-distribution geometry. The combination of digital control and high-current switching outputs makes partition discipline essential for preventing unwanted interference.
Where can I buy TAS5518PAGR online?
Use the Request a Quote form on this page to request TAS5518PAGR availability, current lead time, and the required order quantity. The form allows buyers to specify the exact 64-pin TQFP order code and preferred shipment quantities without relying on potentially stale listing text. Stock status and commercial terms should be confirmed when the quotation is returned.
What is the price of TAS5518PAGR?
The current commercial price for TAS5518PAGR is presented through the Request a Quote form on this page. Requesting a quotation also allows the required reel quantity, target quantity, shipment destination, and schedule to be considered together. This avoids publishing a static price that may not match the selected quantity or current component availability.
What is the lead time and stock status for TAS5518PAGR?
Current TAS5518PAGR stock, minimum order quantity, and lead time should be requested through the Request a Quote form on this page. Include the target order quantity and required delivery date in the request. The form connects the inquiry with the current procurement process rather than relying on an unverified availability statement.
What can replace TAS5518PAGR?
TAS5518CPAG and TAS5518PAG are identified same-family drop-in candidates for TAS5518PAGR because the available comparison information describes consistent terminals, package characteristics, and principal functional parameters. Before replacing the device, verify the 64-pin land pattern, electrical limits, temperature grade, interface timing, and production ordering code against the manufacturer documentation for the selected alternative.
Is TAS5518PAGR the same as TAS5518PAG?
TAS5518PAGR and TAS5518PAG belong to the same Texas Instruments TAS5518 family and are identified as electrically and functionally consistent variants. TAS5518PAGR includes the R order-code suffix, which denotes its specified packaging configuration. They are not separate functional designs, but the exact reel and temperature details should still be checked before procurement.

داتای سەرچاوەی ئەندازیاری بۆ TAS5518PAGR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose TAS5518PAGR for an eight-channel digital Class-D audio design requiring a 3 V to 3.6 V supply, a documented typical system dynamic range of 110 dB, and PSVC support of up to 24 dB. TAS5518CPAG and TAS5518PAG are suitable same-family drop-in candidates when their order, reel, and temperature details satisfy production requirements; the available replacement comparison describes consistent terminals, packages, and principal performance parameters. Because these alternatives offer essentially the same core functionality, procurement status and exact ordering information usually determine the final choice. Consider TAS5508PAGR only after checking its channel count, register map, electrical limits, and pin assignments against the existing design. For all candidates, verify the 64-pin land pattern, interface timing, external clocking, output configuration, and manufacturer layout requirements before approving a substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە TAS5518CPAG TAS5518PAG
Brand Texas Instruments Texas Instruments Texas Instruments
Package TQFP-64 (PAG), 10 x 10 mm TQFP-64 (PAG), 10 x 10 mm TQFP-64 (PAG), 10 x 10 mm
Product Type 8-channel digital audio PWM processor 8-channel digital audio PWM processor 8-channel digital audio PWM processor
Number of Audio Channels 8 channels 8 channels 8 channels
Typical System Dynamic Range 110 dB 110 dB 110 dB
PSVC Additional Dynamic Range Up to 24 dB Up to 24 dB Up to 24 dB
Supply Voltage Range 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V
Control Interface I2C, serial I2C, serial I2C, serial
Total Pin Count 64 pins 64 pins 64 pins

جیاکەرەوە سەرەکییەکان

  • Eight-channel integration in one audio processor (بەراورد بەTAS5518CPAG)
  • Matched multichannel PWM architecture (بەراورد بەTAS5518PAG)
  • Low-voltage digital audio integration (بەراورد بەTAS5508PAGR)

تێبینییەکانی دیزاین

Partition the board so the I2C, serial-control, clock, and other low-level digital routes remain away from the eight PWM outputs. Maintain short, controlled-impedance return paths and avoid routing sensitive signals beneath PWM nets or their switching nodes. Apply the manufacturer land pattern and component-placement recommendations directly to the 64-pin, 10 x 10 mm TQFP footprint.

Place the required input and bypass capacitors immediately adjacent to their associated supply pins, with the ground ends connected to the relevant uninterrupted return plane. Keep the 3 V to 3.6 V supply within the manufacturer limits and verify startup sequencing, current capacity, and noise behavior at the maximum eight-channel operating condition. Use the datasheet capacitor values and topology when they differ from general recommendations.

Do not assume that two similarly named TAS5518 order codes are interchangeable without checking the exact package, temperature grade, reel orientation, and production marking. Also avoid treating the processor as a complete power amplifier: the downstream Class-D stage, filtering network, clocking, control protocol, and thermal design must all be implemented and validated as a system.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status was not stated in the manufacturer page excerpt. The 0 °C to 70 °C ordering range does not by itself establish AEC-Q100 qualification.

داتا پشتڕاستکراوەتەوە لە: 2026-11-15 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

TAS5518PAGR datasheet TAS5518PAGR pinout TAS5518PAGR datasheet pdf TAS5518PAGR replacement TAS5518PAGR equivalent TAS5518PAGR cross reference TAS5518PAGR price TAS5518PAGR stock Texas Instruments TAS5518PAGR TAS5518PAGR 64 pin TQFP TAS5518PAGR PWM processor TAS5518PAGR application circuit TAS5518PAGR vs TAS5508PAGR TAS5518PAGR powered speaker

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments TAS5518PAGR TAS5518CPAG TAS5518PAG TAS5508PAGR TAS5504PAGR TAS5028PAGR digital audio PWM processor digital audio modulator Class-D amplifier power supply volume control PSVC dynamic range I2C PWM output audio DSP consumer audio powered speaker sound bar home theater TQFP-64 PAG package surface-mount package 10 x 10 mm package semiconductor
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ