Texas Instruments

TAS5760MDCA - 55W Stereo Class-D Audio Amplifier | Texas Instruments

MPN: TAS5760MDCA ✓ چالاک
4.5 V to 26.4 V Vdss 32-HTSSOP Package
MOQ: 1 |

TAS5760MDCA گشتی

The Texas Instruments TAS5760MDCA is a digital-input Class-D audio amplifier rated for 55 W stereo output and 114 W mono output, with a 4.5 V to 26.4 V power-supply range and integrated high-pass filtering. The device accepts I2S digital audio and is offered in a 32-HTSSOP package for compact consumer and industrial audio systems.

A Class-D audio amplifier is a switching amplifier that uses efficient power-conversion stages to drive speakers. The hierarchy places the TAS5760MDCA among Class-D amplifiers, digital input amplifiers, audio amplifiers, and integrated power-management semiconductors. Its digital input architecture avoids passing analog audio through a long signal path before amplification, while the Class-D output stage converts that digital stream into a high-power speaker drive.

Principal features include 55 W stereo operation, 114 W mono operation, a 4.5 V to 26.4 V supply range, I2S input, and integrated high-pass filtering. The stereo and mono ratings provide useful flexibility for consumer audio, industrial sound systems, and compact powered speakers. Hardware and software I2C control modes support configuration of amplifier behavior, and the device family provides multiple gain options and digital clip protection for practical system integration.

The TAS5760MDCA supports both stereo and mono output arrangements, allowing the same amplifier platform to address conventional two-channel systems or higher-power single-channel installations. Because its input is digital, the device is best suited to systems in which a host processor, digital audio decoder, or application processor supplies I2S data. Supply, output-stage, control-interface, and thermal requirements still need to be evaluated together when planning the power supply and PCB layout.

Typical applications include powered smart speakers, soundbars, television audio, compact stereo systems, and industrial or IoT audio nodes. The integrated high-pass filter can help remove unwanted low-frequency content from the reproduced signal, while digital control simplifies setup. The package and digital interface are particularly useful where PCB area, signal repeatability, and centralized configuration matter more than accepting an analog input directly.

Design the PCB around the manufacturer's power-supply and output-stage layout guidance, keeping high-current paths compact and providing adequate thermal copper around the power device. Decoupling should follow the application circuit, and I2C routing should avoid high-current switching nodes. Confirm speaker impedance, power limits, heat dissipation, and control sequencing against the manufacturer datasheet before production release.

This page combines the verified product identity, package information, operating-range details, family-level compatibility information, drop-in alternatives, and engineering selection guidance. It is designed to help designers identify the correct amplifier and prepare a practical implementation plan without treating package compatibility as a substitute for full electrical verification.

جێگرەوەکانی جێگۆڕکێ بۆ TAS5760MDCA — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ TAS5760MDCA (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Control Interface, Package, Output Configuration, Amplifier Type, Audio Input.

Texas Instruments
Control Interface: Hardware mode (pin straps) or software mode (I2C)
Package: 48-HTSSOP (PowerPAD)
Output Configuration: 1-Channel Mono or 2-Channel Stereo
بەراوردکردن لەگەڵ TAS5760MDCA →
Texas Instruments
Control Interface: I2C and hardware control modes
Package: 32-pin HTSSOP PowerPAD, 6.10 mm width
Output Configuration: 1-channel mono or 2-channel stereo
بەراوردکردن لەگەڵ TAS5760MDCA →

TAS5760MDAP

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 32-TSSOP
Class-D audio power amplifier · Digital I2S · 55 W · 114 W · 4.5 V to 26.4 V · 2.8 V to 3.63 V · 1-channel mono or 2-channel stereo · I2C and hardware control modes

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TAS5760LDDCA

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 32-TSSOP
Class-D · 1-Channel Mono or 2-Channel Stereo · 21 W per channel · 42 W · 4.5 V to 16.4 V · I2S / TDM digital serial audio port · Hardware mode (pin straps) or software mode (I2C) · Two speed modes for audio clock configurations

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TAS5760MDCA زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type Digital-input Class-D audio amplifier
Stereo Output Power 55 W
Mono Output Power 114 W
Supply Voltage Range 4.5 V to 26.4 V
Audio Input Interface I2S
ڕێکخستنی دەرچوون Stereo or mono
Integrated High-Pass Filter Yes
Control Interface I2C
Control Modes Hardware and software
Digital Clip Protection Integrated
Gain Options Multiple
پاکێج 32-HTSSOP
جۆری دامەزراندن Surface mount
جۆری دەرچوون Class D

ڕێنمایی ڕێکخستنی پینی TAS5760MDCA 32-htssop

ڕێکخستنی پین بۆ TAS5760MDCA (پاکێجی 32-htssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 32-htssop بۆ TAS5760MDCA

هیچ داتای وردی پینئاوت بەردەست نییە بۆ TAS5760MDCA.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

TAS5760MDCA گونجاوە بۆ 6 بەکارھێنانs: Powered Smart Speakers, Soundbar Speaker Arrays, Television Audio Output, Industrial Audio Annunciators, IoT Voice-Control Speakers, Digital Audio Active Speakers.

🔊

Powered Smart Speakers

The TAS5760MDCA fits a powered smart-speaker design that receives I2S audio from a network-enabled processor and must support substantial speaker output. Its 55 W stereo rating provides a clear fit for compact two-way speakers, while the 114 W mono rating supports focused single-driver or subwoofer-style configurations where the amplifier and speaker load permit. I2S input preserves a digital signal path, and hardware or software I2C control enables coordinated setup of gain and operating behavior. Integrated high-pass filtering can help reduce unwanted low-frequency content in small enclosures. Final speaker impedance, power-supply capacity, and thermal performance must be validated together because the stated output ratings do not remove those system constraints.

📺

Soundbar Speaker Arrays

The TAS5760MDCA is well suited to powered soundbar modules that use a digital audio processor to distribute I2S channels across multiple speaker drivers. The 55 W stereo capability supports conventional left and right amplification, while the 114 W mono capability offers a path for a higher-power channel or woofer. Digital clip protection helps the amplifier respond predictably when program material approaches the output limit, and I2C control permits centralized configuration. Designers should account for channel-to-channel gain consistency, speaker impedance, enclosure thermal limits, and the power-supply conversion loss when sizing the system. The integrated high-pass function can also assist with low-frequency management in compact multi-driver enclosures.

📺

Television Audio Output

A television or display audio subsystem can use the TAS5760MDCA when the system architecture supplies I2S audio and requires a high-efficiency local speaker amplifier. The digital input removes the need for a separate analog-input stage close to the drivers, while 55 W stereo output provides useful power for integrated or external speakers. Software I2C control allows the television system to coordinate gain and operating state with video, voice, and notification functions. The 4.5 V to 26.4 V supply range supports multiple platform architectures. Careful acoustic design remains important because amplifier power alone does not determine perceived output quality; microphone isolation, speaker protection, thermal margins, and electromagnetic compatibility also affect the final television implementation.

🏭

Industrial Audio Annunciators

The TAS5760MDCA can power industrial audio annunciators, notification speakers, and machine-to-human communication modules that receive digital audio from a controller. I2S input is useful where several sound messages must originate from a common digital audio subsystem, while I2C control can support mute, gain, and operating-state management. The 55 W stereo rating can serve one pair of speakers, and the 114 W mono rating can support a more powerful single alarm transducer when its electrical characteristics permit. Integrated high-pass filtering may help manage low-frequency vibration or mechanical resonance in industrial housings. Designers must check enclosure acoustics, connector grounding, supply isolation, and protective circuitry so that a high-output amplifier does not create noise or safety issues in the surrounding machinery.

🧩

IoT Voice-Control Speakers

The TAS5760MDCA is appropriate for IoT voice terminals where a voice processor generates an I2S stream and the enclosure includes one or more moderate-power speakers. Digital input integrates naturally with voice-processing silicon, and the available 55 W stereo and 114 W mono ratings provide a choice between conventional stereo playback and a higher-power single-speaker architecture. I2C control enables the host processor to coordinate voice prompts, notification sounds, and normal media playback without separate analog routing. Integrated high-pass filtering can improve control of low-frequency content in compact plastic enclosures, although the cutoff should be selected with the speaker manufacturer. Standby current, startup behavior, EMI, and the audible effects of digital clipping should be evaluated in the complete product.

🔧

Digital Audio Active Speakers

The TAS5760MDCA fits an active-speaker architecture in which one cabinet contains a digital source, amplification, crossover functions, and one or more drivers. The I2S interface allows the amplifier to remain entirely in the digital domain until its Class-D output stage, reducing dependence on analog interconnects. A 55 W stereo configuration can drive left and right channels, while a 114 W mono arrangement may suit a dedicated low-frequency or high-output channel. Multiple gain options and I2C control simplify configuration across a product family, while integrated high-pass filtering provides additional low-frequency management. The designer still must set crossover behavior correctly, verify speaker impedance, provide a power supply with adequate transient response, and account for enclosure heating at continuous high output.

What is the TAS5760MDCA?
The TAS5760MDCA is a Texas Instruments digital-input Class-D audio amplifier with I2S input, 55 W stereo output, 114 W mono output, and a 4.5 V to 26.4 V supply range. According to the Texas Instruments TAS5760MD product page, the family is intended for high-performance audio systems. It also provides hardware and software I2C control modes, multiple gain options, integrated digital clip protection, and integrated high-pass filtering. The listed orderable package for TAS5760MDCA is 32-HTSSOP.
What are the key specifications of TAS5760MDCA that engineers should know?
The key TAS5760MDCA specifications are 55 W stereo output, 114 W mono output, a 4.5 V to 26.4 V supply range, and I2S digital audio input. Texas Instruments describes the device as a digital-input Class-D amplifier with hardware and software I2C control, integrated digital clip protection, multiple gain settings, and a high-pass filter. The exact ordering code is associated with a 32-HTSSOP package. These figures define its intended role as a high-power, digitally controlled amplifier for powered speakers, soundbars, televisions, and similar equipment.
Can TAS5760MDCA drive a speaker in mono or stereo mode?
Yes, the TAS5760MDCA supports both stereo and mono output configurations. Texas Instruments specifies up to 55 W for stereo operation and up to 114 W for mono operation. The exact achievable output also depends on supply voltage, speaker impedance, thermal conditions, and the configuration used. Designers should confirm the relevant power ratings and thermal limits in the manufacturer datasheet before selecting the power supply and output network.
What audio input does TAS5760MDCA use?
The TAS5760MDCA uses an I2S digital audio input. The Texas Instruments product page identifies TAS5760MD as a digital-input Class-D amplifier, while the distributor listing also describes the CA ordering option as a mono or stereo Class-D amplifier with an I2S interface. This makes the device suitable for systems where a processor, decoder, or other digital audio source produces an I2S stream. An analog-to-digital converter is required when the upstream source is analog.
What supply voltage does TAS5760MDCA require?
The TAS5760MDCA operates from 4.5 V to 26.4 V according to the Texas Instruments product page. This broad range supports designs operating from low-voltage portable systems through higher-voltage powered-speaker and consumer-audio equipment. The selected power supply must also support the required output power, amplifier losses, startup current, and thermal conditions. Use the manufacturer application guidance when selecting bulk and bypass capacitance.
Does TAS5760MDCA include a high-pass filter?
Yes, the TAS5760MDCA family includes an integrated high-pass filter. Texas Instruments describes this feature directly on the TAS5760MD product page. The filter can remove undesirable low-frequency energy before it reaches the loudspeaker system, which is particularly useful in compact speakers where excessive excursion can be undesirable. Its configured cutoff behavior and related register settings should be confirmed in the manufacturer datasheet for the intended system.
How is TAS5760MDCA configured through I2C?
The TAS5760MDCA supports hardware and software I2C control modes. According to Texas Instruments, the TAS5760xx family uses a common I2C register map, helping consistent configuration across compatible family members. Hardware control is useful for simple systems that need limited configuration, while software control provides access to more detailed amplifier settings. Designers should verify the required clocking, address, data format, and startup sequence in the manufacturer datasheet.
Where can I download the TAS5760MDCA datasheet PDF?
The official TAS5760MD datasheet is available through Texas Instruments at https://www.ti.com/lit/gpn/TAS5760MD. The manufacturer product page at https://www.ti.com/product/TAS5760MD provides ordering, parameter, quality, and support information. The datasheet is the controlling document for the complete pin description, electrical limits, control-register map, application circuit, thermal information, and recommended PCB layout.
Where can I find the TAS5760MDCA pinout?
The TAS5760MDCA pinout is identified in the official TAS5760MD datasheet at https://www.ti.com/lit/gpn/TAS5760MD. The distributor listing identifies the ordering option as a 32-HTSSOP, but individual pin names and their operating functions must be assigned from the manufacturer pin-description table. Use that table when assigning supply, ground, digital input, control, output, and exposed-pad connections on the PCB.
What can replace TAS5760MDCA?
The TAS5760MDCA can be considered for replacement by the same-package TAS5760M or TAS5760L family options, but compatibility must be confirmed at the function and pin level. Texas Instruments states that TAS5760M and TAS5760L are offered in 32-TSSOP when a headphone or line driver is not required, while the TAS5760xx family also uses a 48-pin TSSOP. Use the family cross-reference information and each candidate's datasheet before treating either option as a drop-in replacement.
Is TAS5760MDCA the same as TAS5760M?
The TAS5760MDCA and TAS5760M belong to the same Texas Instruments TAS5760xx digital Class-D amplifier family, but they are not automatically interchangeable. Texas Instruments states that the 48-pin TSSOP family members are pin-to-pin compatible, while TAS5760M and TAS5760L also have 32-TSSOP options that omit headphone or line-driver requirements. The MD variant includes integrated high-pass filtering, so the exact CA package suffix must be compared with the selected M ordering code before replacement.
What is the best TI equivalent for TAS5760MDCA?
The closest TI family candidates are TAS5760M and TAS5760L because Texas Instruments identifies compatible 32-TSSOP implementations for those devices. Their suitability depends on whether the original design uses the integrated high-pass filter and which functional options the MDCA ordering code requires. Both alternatives are same-brand choices rather than cross-brand equivalents. Confirm footprint, exposed-pad requirements, control-register behavior, output configuration, and load capability before selecting a replacement.
When should I choose TAS5760MDCA over TAS5760M?
Choose TAS5760MDCA when the design benefits from the MD family's integrated high-pass filter, digital clip protection, multiple gain options, and support for both stereo and mono configurations. Consider TAS5760M only when its available 32-TSSOP implementation matches the required pins and functions and the MD-specific features are unnecessary. The decision should be based on the exact suffix, footprint, register behavior, thermal design, and speaker-load requirements rather than family name alone.
Is TAS5760MDCA suitable for powered speakers and soundbars?
The TAS5760MDCA is suitable for many powered-speaker and soundbar designs because it combines I2S input with 55 W stereo and 114 W mono output capability. Its digital control interface also suits modern audio platforms that configure gain and operating behavior through an embedded processor. Suitability depends on speaker impedance, enclosure thermal capacity, power-supply capability, and signal format. Validate those requirements using the manufacturer application information before production.
Where can I buy TAS5760MDCA online and what is its price?
Use the Request a Quote form on this page to request TAS5760MDCA pricing, current availability, lead time, and order quantities. The product is identified by Texas Instruments as a 55 W stereo, 114 W mono, 4.5 V to 26.4 V digital-input Class-D amplifier. Pricing and stock can vary with quantity and market conditions, so the quote form provides the appropriate channel for current commercial information.
What is the lead time and stock status for TAS5760MDCA?
Request the current TAS5760MDCA lead time, stock status, and minimum order quantity through the Request a Quote form on this page. The Texas Instruments product page identifies TAS5760MD as an active product family, but immediate inventory and delivery timing are commercial conditions that can change. State the required order quantity, package suffix, target shipment date, and destination country in the request to obtain the most relevant response.
Does TAS5760MDCA support RoHS, REACH, or automotive qualification?
The verified product information does not establish the TAS5760MDCA's RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 status. Do not assume automotive qualification from the part number or general-purpose family description. Use the manufacturer product page and the latest controlled compliance documentation for purchasing and regulatory review. For an automotive design, request the specific qualification record and confirm whether the selected ordering option is an automotive-grade variant.

داتای سەرچاوەی ئەندازیاری بۆ TAS5760MDCA — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose TAS5760MDCA when the design requires an I2S-input Class-D amplifier with integrated high-pass filtering and published 55 W stereo or 114 W mono output targets. It is a strong fit for powered speakers, soundbars, television audio, and digital industrial-notification systems. Consider TAS5760M when its 32-TSSOP implementation matches the required footprint and the integrated high-pass function is unnecessary. Consider TAS5760L only after verifying that its 32-TSSOP option has every required power, control, and signal feature. The TI family information identifies a common I2C register map, which can simplify firmware portability, but it does not eliminate the need to compare pin functions and ordering suffixes. Verify speaker impedance, power-supply capability, thermal margin, exposed-pad construction, and all required electrical limits before approving a substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە TAS5760M TAS5760L
Package 32-HTSSOP 32-TSSOP 32-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments
Product Family TAS5760xx TAS5760xx TAS5760xx
Amplifier Type Class D Class D Class D
Audio Input I2S I2S I2S
Integrated High-Pass Filter Yes No stated for the 32-TSSOP option No stated for the 32-TSSOP option
Headphone or Line Driver Required by the MD family description Not required for the 32-TSSOP option Not required for the 32-TSSOP option
I2C Register Map TAS5760xx family register map Identical across the TAS5760xx family Identical across the TAS5760xx family

جیاکەرەوە سەرەکییەکان

  • Integrated high-pass filtering in the MD family (بەراورد بەTAS5760M)
  • Higher documented output capability (بەراورد بەTAS5760L)
  • Unified digital control architecture (بەراورد بەTAS5760M)

تێبینییەکانی دیزاین

Use the manufacturer application circuit as the foundation for the PCB rather than treating the 32-HTSSOP outline as sufficient for layout. Place the required input, bypass, and output-network components close to their assigned pins, keep the high-current output path compact, and provide a low-impedance ground return. The exposed pad or thermal structure must be connected as directed by the datasheet. Confirm the selected package's land pattern and exposed-pad dimensions against the controlled drawing before releasing artwork.

Estimate the continuous dissipation from the actual rail voltage, load current, amplifier efficiency, and load rather than from output wattage alone. Estimated: Pdissipation is approximately Pout divided by efficiency minus Pout; for a 55 W output and an assumed 85% efficiency, the amplifier dissipates about 9.7 W, while a 114 W output at the same assumed efficiency dissipates about 20.1 W. These are design estimates rather than datasheet limits, and the actual junction temperature depends on package thermal resistance, copper area, airflow, and ambient temperature.

Keep the I2S clock, data, and control traces away from the Class-D switching outputs and high-current supply loops. Use a continuous ground plane where practical, place bulk and bypass capacitance near the relevant pins, and avoid routing output nets beneath sensitive digital lines. If the speaker connection is long or the enclosure shares a cable bundle with communications wiring, verify common-mode emissions and ground offsets in the finished system rather than relying only on schematic-level filtering.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No specific TAS5760MDCA compliance declaration or AEC-Q100 qualification record was established in the verified product information.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

TAS5760MDCA datasheet TAS5760MDCA datasheet pdf TAS5760MDCA pinout TAS5760MDCA specifications TAS5760MDCA equivalent TAS5760MDCA replacement TAS5760MDCA vs TAS5760M TAS5760MDCA 32-HTSSOP Texas Instruments TAS5760MDCA TAS5760MDCA I2S amplifier TAS5760MDCA powered speaker TAS5760MDCA soundbar amplifier TAS5760MDCA price TAS5760MDCA stock TAS5760MDCA Class-D amplifier

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments TAS5760MDCA TAS5760MD TAS5760M TAS5760L TAS5760xx Class-D amplifier digital-input amplifier audio amplifier power-management semiconductor I2S I2C hardware control mode software control mode digital clip protection integrated high-pass filter stereo output mono output 32-HTSSOP TSSOP surface-mount package powered speaker soundbar industrial audio annunciator I2C register map
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ