NXP Semiconductors

TJA1128FTK/0Z - LIN SBC with 85mA LDO | NXP Semiconductors

MPN: TJA1128FTK/0Z ✓ چالاک
1 integrated low-dropout voltage regulator (LDO) Vdss 85 mA maximum Id 14-HVSON, 3 x 4.5 mm Package
MOQ: 1 |

TJA1128FTK/0Z گشتی

NXP Semiconductors TJA1128FTK/0Z is an automotive LIN mini system basis chip integrating a LIN transceiver, a low-dropout voltage regulator, a window watchdog, wake-up inputs, and system-control functions in a 14-HVSON package measuring 3 x 4.5 mm. The integrated regulator supports 3.3 V and 5.0 V output options and can deliver up to 85 mA for a microcontroller and associated peripheral devices.

A LIN system basis chip, or SBC, is an interface IC that consolidates communication and power-management functions needed at a vehicle network node. The LIN transceiver handles the physical-layer signals used by Local Interconnect Network buses, while the integrated LDO supplies a local logic rail. Together, these functions belong to the interface-IC and power-management-IC hierarchy and reduce the component count required in body electronics, comfort systems, access modules, and small automotive control units.

The TJA1128FTK/0Z combines the LIN transceiver, regulator, watchdog, two WAKE inputs, one general-purpose input, and one high-voltage multipurpose output in one device. The regulator's 85 mA capability is intended to support a local microcontroller and peripheral circuitry. Its window watchdog supports monitoring of software-controlled system activity, while the wake-up inputs provide paths for the system to detect external activity and return from a low-power operating mode.

Automotive system-basis integration can reduce PCB area, wiring, and the number of discrete interface components. The 14-HVSON package also places the communication, regulation, and monitoring functions close to the controller they support. Exact pin assignments, absolute maximum ratings, regulator dropout behavior, and electrical limits should be taken from the NXP manufacturer datasheet when designing the footprint and protection network.

Typical uses include LIN-connected door modules, seat controls, climate-control peripherals, sensor interfaces, lighting controllers, and body-electronics nodes. The device is particularly appropriate where a low-power microcontroller needs both a regulated supply and a standardized LIN physical interface without separate transceiver and regulator packages.

A key design consideration is preserving clean supply current for the transceiver while allowing the regulator to support transient digital loads. Place the LIN interface and its protection network according to the NXP application guidance, confirm the selected regulator output configuration, and verify all wake-up, watchdog, and general-purpose-input thresholds against the final vehicle electrical environment.

This page combines the NXP product information, manufacturer datasheet, verified distributor availability details, same-family replacement references, and practical integration guidance. It also distinguishes documented 85 mA regulator capability, package construction, integrated I/O, and LIN functionality from option-specific details that require circuit-level verification before substitution.

جێگرەوەکانی جێگۆڕکێ بۆ TJA1128FTK/0Z — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ TJA1128FTK/0Z (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Regulator Output Current, Integrated Voltage Regulator, Product Type, High-Voltage Multipurpose Output.

NXP Semiconductors
Package: 14-HVSON, 3.0mm x 4.5mm
Regulator Output Current: Up to 85mA
NXP Semiconductors
Regulator Output Current: 85 mA
Integrated Voltage Regulator: 3.3 V or 5.0 V output option
Product Type: LIN mini system basis chip
NXP Semiconductors
Package: 14-HVSON, 3 mm x 4.5 mm
Regulator Output Current: Up to 85 mA
Integrated Voltage Regulator: 3.3 V low-dropout regulator
NXP Semiconductors
Package: 14-HVSON (3 x 4.5 mm)
High-Voltage Multipurpose Output: 1 HVMPO output

TJA1128ATK/0Z

✅ جێگرەوەی ڕاستەوخۆ
NXP Semiconductors
📦 14-HVSON (3 x 4.5 mm)
LIN mini system basis chip (SBC) · 1/1 half-duplex LIN transceiver · 3.3V or 5.0V low-dropout voltage regulator (LDO) · Up to 85mA · 3V to 28V · Integrated window watchdog · 2 inputs · 1 input

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TJA1128BTK/0Z

✅ جێگرەوەی ڕاستەوخۆ
NXP Semiconductors
📦 14-HVSON (3 x 4.5 mm)
LIN mini system basis chip · Integrated · 3.3 V or 5.0 V output option · Low-dropout voltage regulator · 85 mA · Integrated · 2 inputs · 1 input

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TJA1128HTK/0Z

✅ جێگرەوەی ڕاستەوخۆ
NXP Semiconductors
📦 14-HVSON (3 x 4.5 mm)
LIN Mini System Basis Chip (SBC) · LIN transceiver + LDO + window watchdog + 2 WAKE inputs + 1 GPI + 1 HVMPO output · 1/1 half-duplex LIN transceiver · 85 mA · 3.3 V or 5.0 V · Low-dropout regulator (LDO) · Window watchdog with two WAKE inputs · 1 GPI

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TJA1128FTK/1Z

✅ جێگرەوەی ڕاستەوخۆ
📦 14-HVSON (3 x 4.5 mm)
Same 14-HVSON footprint and 85 mA regulator capability; the /1Z regulator-output option differs from /0Z and must be confirmed against the required 3.3 V or 5.0 V rail.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

TJA1128CTK/0Z

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
NXP Semiconductors
📦 14-HVSON (3 x 4.5 mm)
LIN mini system basis chip · 1/1 transceiver · 3.3 V low-dropout regulator · Up to 85 mA · Integrated · 2 inputs · 1 input · 1 HVMPO output

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TJA1128FTK/0Z تایبەتمەندییەکان

Product Type LIN mini system basis chip (SBC)
LIN Transceiver Integration 1 integrated LIN transceiver
Integrated Voltage Regulator 1 integrated low-dropout voltage regulator (LDO)
Regulator Output Options 3.3 V or 5.0 V
Regulator Output Current 85 mA maximum
Window Watchdog 1 integrated window watchdog
WAKE Inputs 2 inputs
General-Purpose Input 1 input (GPI)
High-Voltage Multipurpose Output 1 output (HVMPO)
پاکێج 14-HVSON, 3 x 4.5 mm
جۆری دامەزراندن Surface mount
Automotive Application Yes

ڕێنمایی ڕێکخستنی پینی TJA1128FTK/0Z 14-hvson, 3 x 4.5 mm

ڕێکخستنی پین بۆ TJA1128FTK/0Z (پاکێجی 14-hvson, 3 x 4.5 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 14-hvson, 3 x 4.5 mm بۆ TJA1128FTK/0Z

هیچ داتای وردی پینئاوت بەردەست نییە بۆ TJA1128FTK/0Z.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

TJA1128FTK/0Z گونجاوە بۆ 6 بەکارھێنانs: Automotive Door-Control Module, Climate-Control Peripheral, Seat and Comfort-Control Node, Automotive Sensor Interface, Body Lighting Controller, Low-Power Access-Control Module.

🚗

Automotive Door-Control Module

The TJA1128FTK/0Z fits a LIN-connected door-control node that needs communication and local power in one compact device. Its integrated LIN transceiver handles the vehicle network physical layer, while the regulator can supply up to 85 mA at 3.3 V or 5.0 V to a local controller and peripheral loads. The window watchdog adds system monitoring, and two WAKE inputs can support external activity detection. This integration is valuable when PCB area is constrained but it does not remove the need to verify wake thresholds, LIN timing, and load transients against the module's electrical specification.

🏭

Climate-Control Peripheral

A climate-control peripheral can use the TJA1128FTK/0Z to combine LIN communication with regulated local power. The 85 mA regulator output is intended for a microcontroller and associated peripheral circuitry rather than high-power fan or heater drivers. The window watchdog can monitor expected software activity, while the GPI and HVMPO provide additional local control and sensing paths. The resulting 14-HVSON implementation can reduce discrete component count, although final suitability depends on startup behavior, standby current, watchdog timing, and the required LIN baud rate.

🖥️

Seat and Comfort-Control Node

The TJA1128FTK/0Z is appropriate for a compact seat or comfort-control node where a LIN bus connects the module to the vehicle network. Its integrated regulator provides a selectable 3.3 V or 5.0 V rail with up to 85 mA output, allowing a small controller to operate without a separate LIN transceiver and LDO. The two WAKE inputs can detect external requests, while the window watchdog supports controlled task execution. Engineers should still verify the selected option's logic levels, watchdog limits, sleep currents, and wake-up behavior before releasing a production design.

📡

Automotive Sensor Interface

A LIN-based sensor interface can use the TJA1128FTK/0Z for both bus communication and regulated controller power. The LIN transceiver consolidates the physical interface, while the 85 mA regulator supports a small sensing controller and associated circuitry. The GPI may be used for a discrete digital input and the HVMPO provides a high-voltage multipurpose output where its exact limits suit the sensor arrangement. This arrangement reduces board area compared with separate communication and power components, but sensor supply noise, bus protection, and output timing must be checked in the final application.

💡

Body Lighting Controller

The TJA1128FTK/0Z can support a small body-lighting controller that receives commands over LIN and operates from a local regulated rail. Its 85 mA regulator capacity is appropriate for control logic and low-current sensing rather than direct LED-string drive, so an external driver may still be required. The window watchdog can detect stalled control tasks, and the wake-up inputs can initiate activity after a low-power interval. The compact 14-HVSON footprint is useful in space-constrained modules, while final qualification should include thermal analysis of the regulator and protection strategy for the vehicle supply.

🔐

Low-Power Access-Control Module

A low-power access-control module can benefit from the TJA1128FTK/0Z because it combines LIN communication, regulated supply, watchdog supervision, and two wake-up inputs in one device. The system can remain in a low-power state and use a WAKE input to detect user or remote activity before restarting its controller. The regulator's up-to-85 mA output supports logic and peripherals, while the LIN transceiver connects the module to the vehicle network. The design should verify the exact low-power currents, wake voltage thresholds, regulator output option, and window-watchdog configuration for the selected TJA1128 ordering code.

What is the TJA1128FTK/0Z?
The TJA1128FTK/0Z is an NXP mini system basis chip for automotive LIN networks. It combines a LIN transceiver, a 3.3 V or 5.0 V low-dropout regulator, a window watchdog, two WAKE inputs, one GPI, and one HVMPO output. According to the NXP manufacturer datasheet, the integrated regulator can deliver up to 85 mA, reducing the number of separate interface and power-supply devices required at a vehicle network node.
What are the key specifications of TJA1128FTK/0Z that engineers should know?
The TJA1128FTK/0Z integrates a LIN transceiver and an automotive system-basis chip into a 14-HVSON package measuring 3 x 4.5 mm. According to the NXP manufacturer datasheet, its regulator provides 3.3 V or 5.0 V output options and up to 85 mA of output current. The package also contains a window watchdog, two WAKE inputs, one general-purpose input, and one high-voltage multipurpose output for compact automotive body and comfort-control nodes.
Where can I download the TJA1128FTK/0Z datasheet PDF?
The official TJA1128FTK/0Z datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1128.pdf. According to the NXP manufacturer datasheet, it describes the LIN transceiver, integrated 85 mA regulator, window watchdog, wake-up inputs, GPI, HVMPO output, electrical characteristics, and application information. Use that document for the authoritative pin description table, absolute maximum ratings, and recommended application circuit.
Where can I find the TJA1128FTK/0Z pinout?
Use the pin-description table and package drawing in the NXP manufacturer datasheet to determine the TJA1128FTK/0Z pinout. The device is offered in a 14-HVSON package measuring 3 x 4.5 mm, but the search result does not enumerate every terminal name. The datasheet's HVSON terminal list and recommended footprint diagram should be cross-checked against the PCB library before routing LIN, supply, wake-up, watchdog, GPI, and HVMPO connections.
How much current can the TJA1128FTK/0Z regulator deliver?
The TJA1128FTK/0Z integrated regulator can deliver up to 85 mA. According to the NXP manufacturer datasheet, the regulator is available with 3.3 V and 5.0 V output options and is intended to supply a local automotive microcontroller and peripheral devices. The actual usable load also depends on input voltage, output setting, thermal conditions, and whether the load behaves as a static or transient current demand.
What automotive applications are suitable for TJA1128FTK/0Z?
The TJA1128FTK/0Z suits compact automotive nodes that communicate over LIN and need a local regulated supply. Typical uses include door and seat modules, climate-control peripherals, sensor interfaces, lighting controllers, and body electronics. According to the NXP manufacturer datasheet, its LIN transceiver, 85 mA regulator, window watchdog, two WAKE inputs, GPI, and HVMPO consolidate several node-level functions while reducing PCB area and component count.
Can the TJA1128FTK/0Z replace a separate LIN transceiver and LDO?
Yes, the TJA1128FTK/0Z can consolidate a separate LIN transceiver and low-dropout regulator when the required electrical functions match. According to the NXP manufacturer datasheet, the device combines the LIN physical interface with a regulator capable of delivering 85 mA at 3.3 V or 5.0 V. It also adds a window watchdog, wake-up inputs, GPI, and HVMPO, but the original design's voltage, timing, logic levels, and protection requirements must be verified before integration.
What can replace the TJA1128FTK/0Z?
The closest documented replacements are the TJA1128ATK/0Z, TJA1128BTK/0Z, TJA1128HTK/0Z, and TJA1128FTK/1Z because they belong to the same NXP TJA1128 family and use the same 14-HVSON package. The available comparison references identify the F and A versions as having identical primary performance profiles. Before replacement, confirm the regulator output option, watchdog behavior, wake-up logic, LIN timing, temperature grade, and exact pin-level implementation.
Is TJA1128ATK/0Z the same as TJA1128FTK/0Z?
The TJA1128ATK/0Z and TJA1128FTK/0Z are reported to have identical primary performance profiles, while both use the 14-HVSON system-basis-chip package. According to the NXP manufacturer datasheet family information, the TJA1128 platform integrates a LIN transceiver, regulator, window watchdog, and wake-up functions. Treat the A and F identifiers as distinct ordering variants and verify the exact option, qualification, and lifecycle details in NXP's ordering information before approving the substitution.
When should I choose TJA1128FTK/0Z over another TJA1128 option?
Choose the TJA1128FTK/0Z when the design requires the documented F-family configuration, a 14-HVSON footprint, and an integrated LIN node supply rated to 85 mA. The F and A versions are reported to have identical primary technical profiles, so the decision should be based on the exact ordering suffix, output-voltage option, qualification, temperature range, and lifecycle status. According to NXP's product information, the TJA1128 family supports 3.3 V and 5.0 V regulator output options.
Is TJA1128FTK/0Z suitable for an automotive body-control module?
The TJA1128FTK/0Z is suitable for compact automotive body-control nodes that use LIN and need a local regulated supply. Its integrated 85 mA regulator, window watchdog, two WAKE inputs, GPI, and HVMPO can support a microcontroller-based module, while the LIN transceiver handles the bus physical layer. According to the NXP manufacturer datasheet, the device is intended for automotive applications, but final qualification still depends on the exact temperature grade and application requirements.
What is the best NXP equivalent for TJA1128FTK/0Z?
The TJA1128ATK/0Z is the strongest same-family equivalent identified because it uses the same 14-HVSON package and is reported to have identical primary performance profiles. The TJA1128BTK/0Z, TJA1128HTK/0Z, and TJA1128FTK/1Z are additional same-family references, but their option-specific differences require confirmation. According to the NXP manufacturer datasheet family information, all support the core LIN, regulator, watchdog, and wake-up integration described for the TJA1128.
Where to buy TJA1128FTK/0Z online?
Use the Request a Quote form on this page to request TJA1128FTK/0Z availability, current commercial terms, and the required package or shipment configuration. The NXP manufacturer page identifies the device as a 14-HVSON automotive LIN system basis chip, while distributor listings confirm market availability. The form lets buyers specify quantity and destination without relying on a static stock statement that may change.
What is the price of TJA1128FTK/0Z?
Use the Request a Quote form on this page for the current TJA1128FTK/0Z commercial price and quantity breaks. The available marketplace snippets use starting-price language rather than explicit quantity-break tables, so those numbers are not suitable as fixed pricing evidence. The request form allows the quantity, target package, and shipment requirements to be included when an updated quotation is prepared.
What is the lead time and stock status for TJA1128FTK/0Z?
Request the current TJA1128FTK/0Z stock quantity, lead time, and minimum order quantity through the Request a Quote form on this page. The product is listed by NXP and appears in current distributor catalogs, but those listings do not provide a stable, universal stock or lead-time commitment. Including the required order quantity and destination in the request produces an answer tied to the current supply position.

داتای سەرچاوەی ئەندازیاری بۆ TJA1128FTK/0Z — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the TJA1128FTK/0Z when an automotive LIN node needs a compact combination of bus communication, local regulation, watchdog supervision, and wake-up inputs. Its documented 85 mA regulator capability and selectable 3.3 V or 5.0 V outputs suit low-power controller electronics rather than direct high-power actuator drive. The TJA1128ATK/0Z is the closest documented substitute because its primary performance profile is reported as identical, but confirm the exact ordering suffix and qualification. Use the TJA1128BTK/0Z or TJA1128HTK/0Z only after checking their option-specific electrical and lifecycle details. The TJA1128FTK/1Z is pin-compatible at the family level but requires confirmation of its regulator output configuration. In every case, verify LIN timing, wake thresholds, watchdog behavior, package pins, thermal limits, and automotive qualification against the manufacturer datasheet before PCB release.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە TJA1128ATK/0Z TJA1128BTK/0Z TJA1128HTK/0Z TJA1128FTK/1Z TJA1128CTK/0Z
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 14-HVSON (3 x 4.5 mm) 14-HVSON (3 x 4.5 mm) 14-HVSON (3 x 4.5 mm) 14-HVSON (3 x 4.5 mm) 14-HVSON (3 x 4.5 mm) 14-HVSON (3 x 4.5 mm)
Product Type LIN mini system basis chip LIN mini system basis chip LIN mini system basis chip LIN mini system basis chip LIN mini system basis chip LIN mini system basis chip
Integrated LIN Transceiver Yes Yes Yes Yes Yes Yes
Window Watchdog Yes Yes Yes Yes Yes Yes

جیاکەرەوە سەرەکییەکان

  • Integrated node power and communication (بەراورد بەTJA1128ATK/0Z)
  • Single-package system-basis architecture (بەراورد بەTJA1128BTK/0Z)
  • Compact 14-HVSON implementation (بەراورد بەTJA1128HTK/0Z)
  • Matched regulator capability across ordering codes (بەراورد بەTJA1128FTK/1Z)

تێبینییەکانی دیزاین

Use the NXP manufacturer datasheet package drawing and recommended footprint when placing the 14-HVSON device. Keep the LIN transceiver path close to the connector and its protection components, while separating sensitive regulator and wake-up routing from high-current or switching nodes. Confirm exposed-pad connection and thermal-via recommendations against the package drawing before release because the search results do not enumerate the individual terminals.

Design the local rail for the documented regulator capability of up to 85 mA rather than treating it as a general-purpose high-current supply. Calculate the worst-case static load, regulator output-capacitor requirement, startup behavior, and transient margin for the selected 3.3 V or 5.0 V option. Confirm that the vehicle supply range, regulator dissipation, and thermal operating environment remain within the datasheet limits.

Do not substitute ordering variants solely because their package names match. Check the exact regulator output option, temperature grade, qualification, watchdog timing, wake-up thresholds, GPI behavior, and HVMPO electrical limits for every TJA1128 suffix. The F and A versions are reported to have identical primary performance profiles, but exact ordering information and the manufacturer datasheet remain the controlling documents for production approval.

Route the LIN bus as a controlled transmission-line interface and place the bus protection, transceiver, and required passive components according to the NXP application guidance. Keep the LIN path away from regulator switching artifacts and unrelated high-impedance inputs. Validate dominant-state levels, bus timing, wake behavior, and electromagnetic compatibility in the completed module rather than relying on nominal transceiver functionality alone.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The device is described by NXP as intended for automotive applications, but the retrieved material does not explicitly state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

داتا پشتڕاستکراوەتەوە لە: 2026-11-09 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

TJA1128FTK/0Z datasheet TJA1128FTK/0Z datasheet pdf TJA1128FTK/0Z pinout TJA1128FTK/0Z equivalent TJA1128FTK/0Z replacement TJA1128FTK/0Z cross reference TJA1128FTK/0Z application circuit TJA1128FTK/0Z price TJA1128FTK/0Z stock NXP TJA1128FTK/0Z TJA1128FTK/0Z 85mA regulator TJA1128FTK/0Z 14-HVSON TJA1128FTK/0Z vs TJA1128ATK/0Z TJA1128FTK/0Z LIN SBC TJA1128FTK/0Z automotive module

پێکهاتە و زاراوە پەیوەندیدارەکان

NXP Semiconductors TJA1128FTK/0Z TJA1128ATK/0Z TJA1128BTK/0Z TJA1128HTK/0Z TJA1128FTK/1Z TJA1128CTK/0Z LIN transceiver Local Interconnect Network system basis chip SBC interface IC low-dropout regulator LDO linear regulator power management IC automotive electronics window watchdog 85 mA output current 3.3 V regulator output 5.0 V regulator output WAKE input general-purpose input GPI high-voltage multipurpose output HVMPO 14-HVSON 3 x 4.5 mm package surface-mount package semiconductor
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ