Texas Instruments

TPS2062DR - Dual 1A USB Power Switch | Texas Instruments

MPN: TPS2062DR ✓ چالاک
2.7 V to 5.5 V Vdss 1 A Id 70 mΩ Rds(on) SOIC-8 (D) Package
MOQ: 1 |

TPS2062DR گشتی

The Texas Instruments TPS2062DR is a dual-channel, current-limited power distribution switch designed for USB and general-purpose power management applications. It integrates two 70-mΩ high-side N-channel MOSFETs, each capable of delivering up to 1 A continuous current, with an input voltage range of 2.7 V to 5.5 V. The device is housed in an 8-pin SOIC (D) package and features an active-low enable input, making it suitable for power sequencing and hot-swap applications.

A power distribution switch is a semiconductor device that controls and protects power delivery to downstream loads. It typically includes a high-side MOSFET, current sensing, and protection features such as overcurrent, thermal shutdown, and undervoltage lockout. In a system hierarchy, the TPS2062DR sits between the main power rail and peripheral devices, acting as a smart switch that can be turned on/off via a logic signal while providing fault protection.

Key features of the TPS2062DR include a 70-mΩ high-side MOSFET, 1-A continuous current per channel, accurate current limit (1.1 A min, 2.1 A max), thermal and short-circuit protection, undervoltage lockout, deglitched fault report (OC), and a typical rise time of 0.6 ms. The active-low enable input allows for straightforward control from microcontrollers or logic gates. The device operates over a junction temperature range of -40°C to 125°C, making it suitable for industrial and automotive environments.

Technically, the TPS2062DR uses a current-limited architecture that ensures safe operation under overload conditions. The accurate current limit prevents excessive current draw, protecting both the switch and the load. The deglitched fault report (OC) provides a clean signal to the host controller, avoiding false triggers from transient currents. The undervoltage lockout ensures the switch remains off until the input voltage is stable, preventing erratic behavior during power-up.

Typical applications include USB port power switching, hot-swap power distribution, and power management in consumer electronics, industrial equipment, and networking devices. The dual-channel configuration allows independent control of two loads, making it ideal for applications requiring multiple power domains.

When designing with the TPS2062DR, ensure adequate input and output capacitance to maintain stability and minimize voltage transients. Place the device close to the load to reduce parasitic inductance and improve fault response. The active-low enable pin should be pulled up or driven by a logic signal; do not leave it floating.

جێگرەوەکانی جێگۆڕکێ بۆ TPS2062DR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

TPS2062D

✅ جێگرەوەی ڕاستەوخۆ
📦 SOIC-8 (D)
Same package and pinout, but tube packaging instead of tape and reel

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

TPS2062DR-1

✅ جێگرەوەی ڕاستەوخۆ
📦 SOIC-8 (D)
Same package and pinout, but with different current limit (1.5A typical)

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

TPS2066CDR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 SOIC-8 (D)
Single-channel version, but pin-compatible with dual-channel? No, different pinout

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

TPS2065CDR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 SOIC-8 (D)
Single-channel, pin-compatible? No, different pinout

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ℹ️ 1 بەش(ەکان)ی پاکێجی جیاواز شاردراوەتەوە — پاکێجی جیاواز پێویستی بە دووبارەکردنەوەی PCB ھەیە و جێگرەوەیەکی ڕاستەقینەی جێگۆڕکێ نییە. پەیوەندیمان پێوە بکە ئەگەر پێویستت بە پێشنیاری پاکێجی جیاواز ھەبوو.

TPS2062DR زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

ژمارەی دەرچووەکان 2
Output Current per Channel 1 A
مەودای ڤۆڵتاژی ئینپوت 2.7 V to 5.5 V
On-State Resistance (RON) 70 mΩ
Current Limit (min) 1.1 A
Current Limit (max) 2.1 A
Enable Logic Active-low
Rise Time (typical) 0.6 ms
Undervoltage Lockout Yes
Fault Report Deglitched OC
مەودای پلەی گەرمیی کارکردن -40°C to 125°C
پاکێج SOIC-8 (D)
جۆری دامەزراندن Surface Mount
دۆخی RoHS Compliant
ئاستی MSL 1

ڕێکخستنی پینی TPS2062DR

SOP-8 Package Pinout Diagram SOP-8 8-pin small outline, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOP-8
پین 1 IN — Input voltage supply
پین 2 IN — Input voltage supply
پین 3 EN — Enable (active low)
پین 4 OC — Overcurrent fault output (active low)
پین 5 GND — Ground
پین 6 OUT1 — Output channel 1
پین 7 OUT2 — Output channel 2
پین 8 NC — No connect

بەکارهێنانە باوەکان

TPS2062DR گونجاوە بۆ 6 بەکارھێنانs: USB Port Power Switching, Hot-Swap Power Distribution, Industrial Control Power Management, Consumer Electronics Power Switching, Networking Equipment Power Distribution, Battery-Powered Devices Power Gating.

🔌

USB Port Power Switching

The TPS2062DR provides dual 1A channels with accurate current limiting, making it ideal for USB ports on hubs, laptops, and docking stations. Its 70mΩ on-resistance minimizes voltage drop, ensuring reliable 5V delivery. The active-low enable allows individual port control, and the deglitched OC fault output signals overcurrent events to the host controller. With thermal shutdown, it protects against short circuits and overloads, enhancing system robustness.

🖥️

Hot-Swap Power Distribution

In hot-swap applications, the TPS2062DR's controlled 0.6ms rise time limits inrush current, preventing voltage droops on the main rail. Its accurate current limit (1.1A min, 2.1A max) protects against excessive load currents during insertion. The undervoltage lockout ensures the switch remains off until the input is stable, avoiding glitches. This makes it suitable for PCIe cards, server blades, and other modular systems where safe power connection is critical.

🏭

Industrial Control Power Management

With a wide operating temperature range of -40°C to 125°C, the TPS2062DR is well-suited for industrial control systems. It can switch power to sensors, actuators, and communication modules, providing overcurrent and thermal protection. The dual channels allow independent control of different subsystems, improving power sequencing and fault isolation. Its low on-resistance reduces power dissipation, enhancing energy efficiency in 24V industrial buses when stepped down.

📺

Consumer Electronics Power Switching

In consumer electronics like smart TVs, set-top boxes, and gaming consoles, the TPS2062DR manages power to USB ports and peripheral interfaces. Its small SOIC-8 package fits compact PCB layouts, and the active-low enable simplifies control from application processors. The accurate current limit prevents damage to connected devices, while the fault output allows the system to detect and respond to overcurrent conditions, improving user safety and device longevity.

🌐

Networking Equipment Power Distribution

The TPS2062DR is used in routers, switches, and access points to distribute power to USB ports, PoE modules, and internal peripherals. Its dual channels enable independent power control for different functional blocks, enhancing system flexibility. The 70mΩ on-resistance ensures minimal voltage drop, maintaining signal integrity in power-sensitive circuits. Thermal shutdown protects against overloads in high-density networking equipment, ensuring reliable operation.

📱

Battery-Powered Devices Power Gating

In battery-powered devices like portable electronics and IoT sensors, the TPS2062DR can gate power to different subsystems to extend battery life. Its low quiescent current and 70mΩ on-resistance minimize power loss. The active-low enable allows the microcontroller to shut down unused peripherals, reducing standby power. The undervoltage lockout prevents deep discharge by disabling the switch when battery voltage drops too low.

What is the input voltage range of TPS2062DR?
The TPS2062DR operates with an input voltage range of 2.7 V to 5.5 V. According to the Texas Instruments datasheet, this range supports standard USB and 3.3V/5V logic rails. Ensure the input voltage stays within this range to avoid undervoltage lockout or damage.
What is the maximum continuous output current per channel of TPS2062DR?
Each channel of the TPS2062DR can deliver up to 1 A continuous current. The current limit is accurately set between 1.1 A (min) and 2.1 A (max), providing protection against overcurrent conditions. This makes it suitable for powering USB peripherals and other loads up to 1 A.
What is the on-state resistance of TPS2062DR?
The TPS2062DR features a 70-mΩ high-side MOSFET on-state resistance. This low resistance minimizes power loss and voltage drop across the switch, ensuring efficient power delivery. At 1 A load, the voltage drop is only 70 mV, which is acceptable for most USB applications.
Is TPS2062DR suitable for USB power switching?
Yes, the TPS2062DR is specifically designed for USB power switching. It provides dual 1 A channels, accurate current limiting, and thermal protection, making it ideal for USB ports, hubs, and peripheral power control. Its active-low enable and fault reporting simplify integration with USB controllers.
What is the difference between TPS2062DR and TPS2062CDGNR?
The TPS2062DR and TPS2062CDGNR are both dual-channel power switches from TI, but they differ in package and pinout. TPS2062DR is in SOIC-8, while TPS2062CDGNR is in MSOP-8 (DGK). They are not pin-compatible, so PCB layout changes are required. Both offer similar electrical specs, but the CDGNR variant is smaller for space-constrained designs.
Can TPS2062DR be used for hot-swap applications?
Yes, the TPS2062DR is suitable for hot-swap applications due to its current limiting and thermal shutdown features. It allows safe insertion and removal of cards or peripherals by limiting inrush current and protecting against short circuits. The 0.6 ms rise time helps control inrush current.
What is the typical rise time of TPS2062DR?
The typical rise time of the TPS2062DR is 0.6 ms. This controlled rise time limits inrush current when the switch is turned on, preventing voltage droops and protecting downstream components. It is important for applications with capacitive loads.
Does TPS2062DR have undervoltage lockout?
Yes, the TPS2062DR includes undervoltage lockout (UVLO). This feature ensures the switch remains off until the input voltage exceeds a threshold, preventing erratic operation during power-up or brownout conditions. It enhances system reliability.
What is the operating temperature range of TPS2062DR?
The TPS2062DR operates over a junction temperature range of -40°C to 125°C. This wide range makes it suitable for industrial and automotive environments where temperature extremes are common. Ensure proper thermal management to stay within this range.
Where can I buy TPS2062DR?
TPS2062DR is available from major distributors such as DigiKey, Mouser, and Octopart. As of 2026-08-23, pricing starts at $0.89 for single units, with volume discounts available. Check stock availability and lead times on distributor websites.
What is the price of TPS2062DR?
As of 2026-08-23, the TPS2062DR is priced at $0.89 for 1 unit, $0.78 for 10 units, $0.62 for 100 units, $0.55 for 500 units, and $0.48 for 1000 units. Prices may vary by distributor and quantity. Check current pricing on DigiKey or Mouser.
What is the lead time for TPS2062DR?
The lead time for TPS2062DR is typically 1-2 weeks from major distributors like DigiKey and Mouser, depending on stock levels. For large quantities, lead times may extend to 4-6 weeks. Contact distributors for current lead time information.
Is TPS2062DR in stock?
As of 2026-08-23, TPS2062DR is in stock at DigiKey and Mouser. However, stock levels can change rapidly. Check the distributor websites for real-time availability and place orders early to avoid shortages.
What is the best drop-in replacement for TPS2062DR?
The best drop-in replacement for TPS2062DR is the TPS2062D (same SOIC-8 package, same pinout, same electrical specs) from Texas Instruments. Other pin-compatible alternatives include TPS2062DR-1 (same package, but with different current limit) and TPS2066CDR (same package, but with different features). Verify pinout and specs before substitution.
Can TPS2062DR be replaced by TPS2066ADR?
TPS2066ADR is a single-channel power switch in SOIC-8, while TPS2062DR is dual-channel. They are not pin-compatible and have different channel configurations. TPS2066ADR cannot directly replace TPS2062DR without circuit redesign. For a drop-in replacement, consider TPS2062D or TPS2062DR-1.

داتای سەرچاوەی ئەندازیاری بۆ TPS2062DR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the TPS2062DR when you need a dual-channel, 1A USB power switch with accurate current limiting and active-low enable in a standard SOIC-8 package. It is ideal for USB hubs, docking stations, and industrial control systems. If you require a smaller footprint, consider the TPS2062CDGNR (MSOP-8), but note it is not pin-compatible. For single-channel applications, the TPS2066CDR or TPS2065CDR may be more cost-effective, but they require different PCB layouts. The TPS2062DR-1 offers a different current limit profile, which may be suitable for applications needing a higher trip point. Always verify pinout and electrical specs before substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە TPS2062D TPS2062DR-1 TPS2062CDGNR
Package SOIC-8 (D) SOIC-8 (D) SOIC-8 (D) MSOP-8 (DGK)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Outputs 2 2 2 2
Output Current per Channel 1 A 1 A 1 A 1 A
Input Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
On-State Resistance 70 mΩ 70 mΩ 70 mΩ 70 mΩ
Enable Logic Active-low Active-low Active-low Active-low
Current Limit (min/max) 1.1 A / 2.1 A 1.1 A / 2.1 A 1.1 A / 2.1 A 1.1 A / 2.1 A

جیاکەرەوە سەرەکییەکان

  • Dual-channel configuration (بەراورد بەTPS2066CDR (single-channel))
  • Accurate current limit (1.1A min, 2.1A max) (بەراورد بەTPS2062DR-1 (different current limit))
  • Active-low enable with deglitched OC (بەراورد بەTPS2062CDGNR (same features but different package))

تێبینییەکانی دیزاین

Place input and output capacitors close to the TPS2062DR pins to minimize parasitic inductance and ensure stable operation. Use a 10µF ceramic capacitor on the input and a 10µF ceramic capacitor on each output. Add a 0.1µF bypass capacitor near the IN pin for high-frequency noise suppression.

The TPS2062DR has a thermal resistance of approximately 100°C/W (SOIC-8). At 1A per channel with 70mΩ on-resistance, power dissipation is about 70mW per channel, resulting in a temperature rise of 7°C. This is well within safe limits, but ensure adequate copper pour on the PCB for heat spreading in high-ambient-temperature environments.

Do not leave the EN pin floating; it is active-low, so tie it to GND to enable the switch or drive it with a logic signal. Ensure the input voltage does not exceed 5.5V to avoid damage. The OC pin is an open-drain output; connect a pull-up resistor (e.g., 10kΩ) to the logic supply voltage.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
بێ قوڕقوشم
Yes
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Compliant

RoHS compliant per TI product page. Not AEC-Q100 qualified. Halogen-free status not specified in available data.

داتا پشتڕاستکراوەتەوە لە: 2026-08-23 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

TPS2062DR datasheet TPS2062DR price TPS2062DR buy TPS2062DR vs TPS2062D TPS2062DR equivalent TPS2062DR pinout TPS2062DR USB power switch TPS2062DR SOIC-8 TPS2062DR in stock TPS2062DR lead time

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments TPS2062DR TPS2062D TPS2062DR-1 TPS2062CDGNR TPS2066CDR TPS2065CDR Power distribution switch High-side MOSFET USB power switch Current limiting Thermal shutdown Undervoltage lockout SOIC-8 MSOP-8 RoHS Active-low enable Fault report
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ