TPS2062DR - Dual 1A USB Power Switch | Texas Instruments
料号： TPS2062DR ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0.89 | $0.89 |
| 10 | $0.78 | $7.80 |
| 100 | $0.62 | $62.00 |
| 500 | $0.55 | $275.00 |
| 1,000 | $0.48 | $480.00 |
TPS2062DR 概述
A power distribution switch is a semiconductor device that controls and protects power delivery to downstream loads. It typically includes a high-side MOSFET, current sensing, and protection features such as overcurrent, thermal shutdown, and undervoltage lockout. In a system hierarchy, the TPS2062DR sits between the main power rail and peripheral devices, acting as a smart switch that can be turned on/off via a logic signal while providing fault protection.
Key features of the TPS2062DR include a 70-mΩ high-side MOSFET, 1-A continuous current per channel, accurate current limit (1.1 A min, 2.1 A max), thermal and short-circuit protection, undervoltage lockout, deglitched fault report (OC), and a typical rise time of 0.6 ms. The active-low enable input allows for straightforward control from microcontrollers or logic gates. The device operates over a junction temperature range of -40°C to 125°C, making it suitable for industrial and automotive environments.
Technically, the TPS2062DR uses a current-limited architecture that ensures safe operation under overload conditions. The accurate current limit prevents excessive current draw, protecting both the switch and the load. The deglitched fault report (OC) provides a clean signal to the host controller, avoiding false triggers from transient currents. The undervoltage lockout ensures the switch remains off until the input voltage is stable, preventing erratic behavior during power-up.
Typical applications include USB port power switching, hot-swap power distribution, and power management in consumer electronics, industrial equipment, and networking devices. The dual-channel configuration allows independent control of two loads, making it ideal for applications requiring multiple power domains.
When designing with the TPS2062DR, ensure adequate input and output capacitance to maintain stability and minimize voltage transients. Place the device close to the load to reduce parasitic inductance and improve fault response. The active-low enable pin should be pulled up or driven by a logic signal; do not leave it floating.
直接替换替代料： TPS2062DR ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
快速对比工具——选择替代料号进行并排对比：
TPS2062D
✅ 直接替换📋 参考替代料（不在目录中）
TPS2062DR-1
✅ 直接替换📋 参考替代料（不在目录中）
TPS2066CDR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
TPS2065CDR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
TPS2062DR 最大额定值与电气特性
| 输出数量 | 2 |
| Output Current per Channel | 1 A |
| 输入电压范围 | 2.7 V to 5.5 V |
| On-State Resistance (RON) | 70 mΩ |
| Current Limit (min) | 1.1 A |
| Current Limit (max) | 2.1 A |
| Enable Logic | Active-low |
| Rise Time (typical) | 0.6 ms |
| Undervoltage Lockout | Yes |
| Fault Report | Deglitched OC |
| 工作温度范围 | -40°C to 125°C |
| 封装 | SOIC-8 (D) |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
| MSL 等级 | 1 |
TPS2062DR 引脚配置
| 引脚 1 | IN — Input voltage supply |
| 引脚 2 | IN — Input voltage supply |
| 引脚 3 | EN — Enable (active low) |
| 引脚 4 | OC — Overcurrent fault output (active low) |
| 引脚 5 | GND — Ground |
| 引脚 6 | OUT1 — Output channel 1 |
| 引脚 7 | OUT2 — Output channel 2 |
| 引脚 8 | NC — No connect |
典型应用
TPS2062DR 适用于 6 应用s: USB Port Power Switching, Hot-Swap Power Distribution, Industrial Control Power Management, Consumer Electronics Power Switching, Networking Equipment Power Distribution, Battery-Powered Devices Power Gating.
USB Port Power Switching
The TPS2062DR provides dual 1A channels with accurate current limiting, making it ideal for USB ports on hubs, laptops, and docking stations. Its 70mΩ on-resistance minimizes voltage drop, ensuring reliable 5V delivery. The active-low enable allows individual port control, and the deglitched OC fault output signals overcurrent events to the host controller. With thermal shutdown, it protects against short circuits and overloads, enhancing system robustness.
推荐
Hot-Swap Power Distribution
In hot-swap applications, the TPS2062DR's controlled 0.6ms rise time limits inrush current, preventing voltage droops on the main rail. Its accurate current limit (1.1A min, 2.1A max) protects against excessive load currents during insertion. The undervoltage lockout ensures the switch remains off until the input is stable, avoiding glitches. This makes it suitable for PCIe cards, server blades, and other modular systems where safe power connection is critical.
推荐
Industrial Control Power Management
With a wide operating temperature range of -40°C to 125°C, the TPS2062DR is well-suited for industrial control systems. It can switch power to sensors, actuators, and communication modules, providing overcurrent and thermal protection. The dual channels allow independent control of different subsystems, improving power sequencing and fault isolation. Its low on-resistance reduces power dissipation, enhancing energy efficiency in 24V industrial buses when stepped down.
推荐
Consumer Electronics Power Switching
In consumer electronics like smart TVs, set-top boxes, and gaming consoles, the TPS2062DR manages power to USB ports and peripheral interfaces. Its small SOIC-8 package fits compact PCB layouts, and the active-low enable simplifies control from application processors. The accurate current limit prevents damage to connected devices, while the fault output allows the system to detect and respond to overcurrent conditions, improving user safety and device longevity.
推荐
Networking Equipment Power Distribution
The TPS2062DR is used in routers, switches, and access points to distribute power to USB ports, PoE modules, and internal peripherals. Its dual channels enable independent power control for different functional blocks, enhancing system flexibility. The 70mΩ on-resistance ensures minimal voltage drop, maintaining signal integrity in power-sensitive circuits. Thermal shutdown protects against overloads in high-density networking equipment, ensuring reliable operation.
推荐
Battery-Powered Devices Power Gating
In battery-powered devices like portable electronics and IoT sensors, the TPS2062DR can gate power to different subsystems to extend battery life. Its low quiescent current and 70mΩ on-resistance minimize power loss. The active-low enable allows the microcontroller to shut down unused peripherals, reducing standby power. The undervoltage lockout prevents deep discharge by disabling the switch when battery voltage drops too low.
推荐
推荐产品汇总
工程参考数据： TPS2062DR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TPS2062D | TPS2062DR-1 | TPS2062CDGNR |
|---|---|---|---|---|
| Package | SOIC-8 (D) | SOIC-8 (D) | SOIC-8 (D) | MSOP-8 (DGK) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Number of Outputs | 2 | 2 | 2 | 2 |
| Output Current per Channel | 1 A | 1 A | 1 A | 1 A |
| Input Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| On-State Resistance | 70 mΩ | 70 mΩ | 70 mΩ | 70 mΩ |
| Enable Logic | Active-low | Active-low | Active-low | Active-low |
| Current Limit (min/max) | 1.1 A / 2.1 A | 1.1 A / 2.1 A | 1.1 A / 2.1 A | 1.1 A / 2.1 A |
关键差异点
- Dual-channel configuration （对比 TPS2066CDR (single-channel))
- Accurate current limit (1.1A min, 2.1A max) （对比 TPS2062DR-1 (different current limit))
- Active-low enable with deglitched OC （对比 TPS2062CDGNR (same features but different package))
设计说明
Place input and output capacitors close to the TPS2062DR pins to minimize parasitic inductance and ensure stable operation. Use a 10µF ceramic capacitor on the input and a 10µF ceramic capacitor on each output. Add a 0.1µF bypass capacitor near the IN pin for high-frequency noise suppression.
The TPS2062DR has a thermal resistance of approximately 100°C/W (SOIC-8). At 1A per channel with 70mΩ on-resistance, power dissipation is about 70mW per channel, resulting in a temperature rise of 7°C. This is well within safe limits, but ensure adequate copper pour on the PCB for heat spreading in high-ambient-temperature environments.
Do not leave the EN pin floating; it is active-low, so tie it to GND to enable the switch or drive it with a logic signal. Ensure the input voltage does not exceed 5.5V to avoid damage. The OC pin is an open-drain output; connect a pull-up resistor (e.g., 10kΩ) to the logic supply voltage.
合规信息
RoHS compliant per TI product page. Not AEC-Q100 qualified. Halogen-free status not specified in available data.
