USB2514B-AEZG - 4-Port USB 2.0 Hub Controller | Microchip
MPN: USB2514B-AEZG ✓ چالاکUSB2514B-AEZG گشتی
A USB hub controller is a bus-interface semiconductor that manages traffic between one upstream USB port and multiple downstream ports. USB 2.0 high-speed operation supports data transfer at rates up to 480 Mb/s, while a configurable USB 2.0 hub architecture accommodates mixed-speed devices. The USB2514B family also provides I2C configuration, allowing implementation-specific hub parameters to be controlled through a host-accessible interface.
The controller is positioned as a low-power, cost-effective solution for applications requiring several USB connections without implementing a full host controller. Its four-port configuration reduces the need for multiple discrete USB switching components and simplifies enclosure design. The 36-QFN package supports compact PCB layouts, although careful escape routing is required for high-speed USB signals.
Microchip identifies the USB2514B as a configurable Multi-Transaction Translator hub controller for embedded USB solutions. Mixed-speed support is important when a hub connects USB 2.0 high-speed, full-speed, and low-speed peripherals to a single host. Configuration through I2C allows firmware or an embedded controller to set device behavior according to product requirements.
Typical uses include USB docking stations, consumer peripherals, mobile accessories, industrial control panels, and embedded systems that need multiple downstream USB ports. The part can also support USB-to-wireless adapters, data-transfer accessories, and compact multi-port charging or connectivity products when the complete design satisfies USB power and signal-integrity requirements.
Designers should follow the manufacturer reference schematic and pin-description table for the 36-QFN footprint, including the exposed-pad connection. Place the input and output decoupling capacitors close to their supply pins, route USB differential pairs as controlled-impedance pairs, and minimize branch stubs on high-speed signals.
This page combines manufacturer product information, verified package details, practical PCB guidance, and same-package replacement analysis to support component selection and design review without duplicating the complete manufacturer datasheet.
جێگرەوەکانی جێگۆڕکێ بۆ USB2514B-AEZG — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ USB2514B-AEZG (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Configuration Interface, Operating Temperature, Product Type, USB Standard.
USB2514B-AEZC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2514BI-AEZG-TR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USX2064
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
USB2514BT/M2
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2514B/M2
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2514B-AEZG تایبەتمەندییەکان
| Device Type | 4-port USB 2.0 high-speed hub controller |
| Number of USB Ports | 4 downstream ports |
| USB Interface Version | USB 2.0 |
| Maximum USB Data Rate | 480 Mb/s |
| ڤۆڵتیەی دابینکردن | 3.3 V |
| Configuration Interface | I2C |
| پلەی گەرمیی کارکردن | 0 to 70 C |
| پاکێج | 36-pin QFN |
| Package Dimensions | 6 x 6 mm |
| Package Pitch | 0.50 mm |
| جۆری دامەزراندن | Surface mount |
| Exposed Pad | Present |
| دۆخی RoHS | Compliant |
| Temperature Range Code | 0 to 70 C |
| Device Classification | USB interface controller |
| Port Expansion | 1 upstream connection to 4 downstream USB ports |
| کارکردن | Low-power configurable USB 2.0 hub |
ڕێنمایی ڕێکخستنی پینی USB2514B-AEZG 0.50 mm
ڕێکخستنی پین بۆ USB2514B-AEZG (پاکێجی 0.50 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ USB2514B-AEZG.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
USB2514B-AEZG گونجاوە بۆ 6 بەکارھێنانs: Compact USB Docking Station, Mobile Accessory Hub, Industrial Control Panel, USB-to-Wireless Adapter, Multi-Port Data Transfer Accessory, USB Security and Accessory Hub.
Compact USB Docking Station
The USB2514B-AEZG fits a compact docking station that expands one upstream USB 2.0 connection into four downstream ports. Its 480 Mb/s high-speed capability supports data-transfer peripherals while the four-port configuration keeps switching logic centralized. The 36-pin, 6 x 6 mm QFN package limits board area compared with a discrete USB switching implementation. Place local decoupling close to the supply pins and preserve controlled-impedance routing for the upstream and downstream differential pairs. The design must also provide adequate VBUS power for the attached devices and verify downstream-port current limits against the product’s USB power budget.
پێشنیارکراو
Mobile Accessory Hub
The USB2514B-AEZG is well suited to mobile accessories that combine several USB peripherals with a compact internal controller. Its 3.3 V supply and low-power USB 2.0 hub architecture support consumer and mobile equipment, while the QFN package helps limit enclosure volume. Configuration through I2C allows an embedded controller to apply product-specific hub settings during startup. Keep the USB traces short, use a continuous ground reference, and isolate noisy power conversion from the USB data paths. Thermal and power checks are particularly important when several downstream devices draw current simultaneously.
پێشنیارکراو
Industrial Control Panel
The USB2514B-AEZG can provide four USB 2.0 connections on an industrial control panel that accepts keyboards, service tools, data loggers, or configuration adapters. Mixed-speed hub operation allows different USB device classes to coexist on the same host port, and the 0 to 70 C rating suits many commercial and controlled industrial environments. The QFN footprint requires careful fanout from the 0.50 mm-pitch package, while the exposed pad should be connected according to the manufacturer land pattern. Validate electrostatic protection, cable transients, grounding, and enclosure-level EMI requirements before production release.
پێشنیارکراو
USB-to-Wireless Adapter
The USB2514B-AEZG is suitable for an adapter that connects one host USB port to multiple external devices through separate downstream USB connections. The hub transaction function manages contention and mixed-speed traffic while I2C configuration supports device-specific setup. This arrangement can simplify a USB-to-wireless, storage, or peripheral-expansion product without assigning a separate host port to every function. Use short differential traces, maintain symmetrical geometry, and place ESD-protection devices where cable conductors enter the board. Confirm that the selected radio or storage companion operates within the throughput supported by USB 2.0 high-speed.
پێشنیارکراو
Multi-Port Data Transfer Accessory
The USB2514B-AEZG enables a data-transfer accessory to offer several downstream USB ports while retaining a single upstream connection to a computer. Its 480 Mb/s interface capability suits storage, programming, and peripheral adapters where multiple cable connections are convenient. The 36-QFN package reduces the footprint needed for the hub function, and I2C configuration provides a route to set implementation-specific behavior. Designers should budget VBUS power for attached media, include protection against hot-plug transients, and test enumeration across mixed-speed devices. Differential-pair geometry and uninterrupted ground planes are essential for reliable high-speed operation.
پێشنیارکراو
USB Security and Accessory Hub
The USB2514B-AEZG can form the central hub section of a compact security or access-control accessory that needs multiple peripheral connections. Its configurable architecture supports one upstream host link and four downstream USB ports, while I2C allows system firmware to coordinate device availability. The 3.3 V operating supply and small QFN package suit embedded products with limited board area. Enclosure access introduces ESD and surge risks, so place appropriate protection at connector entries and keep it out of the high-speed data traces. Verify operating-temperature suitability against the deployment environment and confirm host-driver behavior across every attached peripheral class.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ USB2514B-AEZG — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | USB2514B-AEZC | USB2514Bi-AEZG | USX2064 | USB2514BT/M2 | USB2514B/M2 |
|---|---|---|---|---|---|---|
| Package | 36-QFN (6 x 6 mm) | 36-QFN (6 x 6 mm) | 36-QFN (6 x 6 mm) | 36-QFN (6 x 6 mm) | 36-QFN (6 x 6 mm) | 36-QFN (6 x 6 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| USB Ports | 4 downstream ports | 4 downstream ports | 4 downstream ports | 4 downstream ports | 4 downstream ports | 4 downstream ports |
| USB Interface | USB 2.0 high-speed | USB 2.0 high-speed | USB 2.0 high-speed | USB 2.0 high-speed | USB 2.0 high-speed | USB 2.0 high-speed |
| Maximum Data Rate | 480 Mb/s | 480 Mb/s | 480 Mb/s | 480 Mb/s | 480 Mb/s | 480 Mb/s |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Configuration Interface | I2C | I2C | I2C | I2C | I2C | I2C |
جیاکەرەوە سەرەکییەکان
- Gold-bond-wire implementation (بەراورد بەUSB2514B-AEZC)
- Explicit drop-in compatibility for USB2514B designs (بەراورد بەUSX2064)
- Four-port integration in a compact package (بەراورد بەUSB2513B-AEZG-TR)
تێبینییەکانی دیزاین
Follow the Microchip USB2514B reference layout for the 36-QFN footprint and exposed pad. Escape USB differential pairs directly from the device before adding test points or connector routing. Maintain symmetrical pair geometry, a continuous ground reference, and manufacturer-recommended impedance. Place high-frequency decoupling immediately across the relevant supply pins and keep the connection to the exposed pad short and low-inductance.
Treat upstream and downstream USB pairs as controlled-impedance interconnects from controller to connector. Avoid stubs, unnecessary vias, and long runs adjacent to switching regulators or digital clocks. Use a solid ground plane, place protection devices near connector entries, and verify return-path continuity. System-level compliance testing is important because hub performance depends on the complete trace, connector, cable, and peripheral arrangement.
Design the 3.3 V supply and downstream VBUS distribution for the worst simultaneous load rather than a single connected accessory. Include local decoupling at the controller, verify startup current, and account for inrush when multiple downstream devices are attached. Confirm that the power-supply design maintains the controller and USB signaling rails within their required limits under transient and fault conditions.
Do not treat family similarity as automatic production interchangeability. USB2514B-AEZG and USB2514B-AEZC differ in documented bond-wire construction, while suffix changes can identify different production or qualification conditions. Before substitution, review the manufacturer ordering table, pin configuration, USB identifiers, firmware support, temperature grade, exposed-pad layout, and approved-source requirements.
زانیاری پابەندبوون
RoHS-compliant construction is stated in the component specification. Other environmental and conflict-minerals declarations are not established by the cited product information.