USB2514B-I/M2 - 4-Port USB 2.0 Hub Controller | Microchip
MPN: USB2514B-I/M2 ✓ چالاکUSB2514B-I/M2 گشتی
A USB hub controller is an interface integrated circuit that manages USB traffic between one upstream host port and multiple downstream device ports. It belongs to the USB interface controller hierarchy, which sits within interface ICs and system connectivity semiconductors. USB 2.0 high-speed operation supports peripheral expansion for storage, communications, human-interface devices, and other USB equipment, while the integrated hub controller simplifies host-side port management compared with discrete USB switching solutions.
The verified product information identifies USB2514B as a cost-effective, power-efficient, four-port USB 2.0 high-speed hub controller. Microchip describes the device as well suited to consumer and mobile applications, where compact package size, low operating voltage, and integrated USB hub functionality are valuable. The supplied ordering code includes the I/M2 package designation, and distributor listings identify the physical package as 36-SQFN, 6 x 6 mm.
The USB2514B family is based on Microchip MultiTRAK technology, which is intended to support USB throughput in mixed-speed USB environments. Mixed-speed support is important when a hub connects full-speed and high-speed peripherals, because the controller must coordinate traffic between devices operating at different USB speeds while presenting a controlled upstream connection to the host.
Typical uses include compact USB expansion for embedded computers, single-board computers, consumer peripherals, mobile accessories, and industrial control equipment. In an embedded system, the controller can divide an upstream USB port into four downstream connections for keyboards, storage devices, communications modules, or test equipment. In a portable product, the 3 V to 3.6 V operating range can simplify integration with low-voltage system rails, although the final power budget must include downstream-device requirements.
Designers should verify the exact pin assignments, crystal or clock requirements, power sequencing, decoupling, and USB signal-routing constraints against the Microchip datasheet before layout. USB differential traces require controlled impedance, short return paths, careful branch routing, and ESD protection appropriate to the connector exposure. The verified data does not include a public pinout, electrical limits beyond the identified supply range and USB speed, or detailed timing values.
This product page consolidates the verified manufacturer and distributor information, distinguishes the USB2514B-I/M2 ordering variant from related family members, and provides practical selection guidance for USB hub applications. It also presents verified drop-in comparison candidates where the available cross-reference data supports package and terminal compatibility.
جێگرەوەکانی جێگۆڕکێ بۆ USB2514B-I/M2 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ USB2514B-I/M2 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Number of Downstream Ports, USB Standard, Interface Type.
USB2514BT-I/M2
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2514B/M2
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2514B-AEZC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2514BT/M2
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2514B-AEZC-TR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →USB2514B-I/M2 تایبەتمەندییەکان
| Device Type | 4-port USB hub controller |
| USB Version | USB 2.0 |
| USB Speed | High-speed |
| Number of Downstream Ports | 4 ports |
| ڤۆڵتاژی دابینکردنی کارکردن | 3 V to 3.6 V |
| جۆری ڕووکار | USB interface |
| پاکێج | 36-SQFN, 6 x 6 mm |
| ژمارەی پین | 36 pins |
| جۆری دامەزراندن | Surface mount |
| Supported Device Class | Consumer and mobile applications |
| Technology | MultiTRAK technology |
| Mixed-Speed Support | Yes |
ڕێنمایی ڕێکخستنی پینی USB2514B-I/M2 36-sqfn, 6 x 6 mm
ڕێکخستنی پین بۆ USB2514B-I/M2 (پاکێجی 36-sqfn, 6 x 6 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ USB2514B-I/M2.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
USB2514B-I/M2 گونجاوە بۆ 6 بەکارھێنانs: Embedded Computer USB Expansion, Mobile Accessory Hub, USB Storage Test Station, Industrial Control Panel, Consumer USB Peripheral Hub, Communication Adapter.
Embedded Computer USB Expansion
The USB2514B-I/M2 fits embedded computers that expose one host USB connection but need several peripherals. Its four-port USB 2.0 high-speed architecture provides a compact expansion path for keyboards, storage, communications adapters, and test equipment, while the 36-SQFN, 6 x 6 mm package preserves board area. The verified 3 V to 3.6 V operating range also suits low-voltage embedded platforms. Designers should implement differential USB routing, compliant connector protection, and a power budget that accounts for all attached downstream devices rather than only the controller supply current.
پێشنیارکراو
Mobile Accessory Hub
The USB2514B-I/M2 is suitable for compact mobile accessories that need to turn a host port into four USB 2.0 connections. Microchip specifically positions USB2514B for consumer and mobile applications, emphasizing cost efficiency and power efficiency. Its 3 V to 3.6 V operating supply range can simplify low-voltage rail integration, while the 6 x 6 mm SQFN package limits footprint. A practical design must separate or carefully budget USB VBUS loading and use short, impedance-controlled high-speed traces to preserve signal integrity.
پێشنیارکراو
USB Storage Test Station
The USB2514B-I/M2 can form the hub section of a USB storage test station, allowing one host controller to manage multiple flash drives, card readers, or external disks. Four USB 2.0 high-speed downstream ports support a denser test arrangement than a single direct connection, and the compact 36-SQFN package leaves more board space for test electronics. Because attached media can draw significant bus current, the implementation must follow USB power rules and use protection suited to frequently connected external devices.
پێشنیارکراو
Industrial Control Panel
The USB2514B-I/M2 can expand USB connectivity in an industrial control panel where a controller needs access to keyboards, mass storage, diagnostic tools, or service interfaces. The four-port USB 2.0 high-speed hub function reduces the need for multiple host ports, and the mixed-speed support associated with MultiTRAK technology helps manage full-speed and high-speed peripherals together. Engineers should prioritize robust USB trace geometry, ESD protection at external connectors, controlled VBUS switching, and environmental qualification appropriate to the panel rather than assuming consumer-rated suitability.
پێشنیارکراو
Consumer USB Peripheral Hub
The USB2514B-I/M2 is a practical controller for consumer peripherals that require four USB 2.0 high-speed ports in a compact enclosure. A single upstream host connection can serve keyboards, controllers, storage, and other accessories, while the controller's stated consumer and mobile positioning supports compact product design. The 3 V to 3.6 V operating range and 36-SQFN footprint are useful where board space and power architecture are constrained. Production validation should include simultaneous-load testing, connector ESD events, and cable compatibility checks.
پێشنیارکراو
Communication Adapter
The USB2514B-I/M2 can support a communication adapter that presents multiple USB links to a host system. The four downstream ports may be used for serial adapters, network devices, diagnostic modules, or data-collection equipment, and USB 2.0 high-speed operation is suitable for moderate-rate peripherals. Microchip's mixed-speed USB capability is relevant when low-speed control devices and high-speed data devices share the hub. The design must maintain contiguous USB ground references, control impedance, and provide protection appropriate to each exposed connector.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ USB2514B-I/M2 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | USB2514BT-I/M2 | USB2514B/M2 | USB2514B-AEZC | USB2514BT/M2 | USB2514B-AEZC-TR |
|---|---|---|---|---|---|---|
| Package | 36-SQFN (6x6) | 36-SQFN (6x6) | 36-SQFN (6x6) | 36-SQFN (6x6) | 36-SQFN (6x6) | 36-QFN (6x6) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| USB Version | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 |
| Hub Port Count | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports |
| USB Speed | High-speed | High-speed | High-speed | High-speed | High-speed | High-speed |
| Technology | MultiTRAK technology | MultiTRAK technology | MultiTRAK technology | MultiTRAK technology | MultiTRAK technology | MultiTRAK technology |
| Application Positioning | Consumer and mobile applications | Consumer and mobile USB hub | Consumer and mobile USB hub | Compact USB 2.0 port expansion | Consumer and mobile USB hub | Compact USB 2.0 port expansion |
جیاکەرەوە سەرەکییەکان
- Directly documented drop-in compatibility (بەراورد بەUSB2514BT-I/M2)
- Compact four-port integration (بەراورد بەUSB2514B-AEZC)
- Low-voltage operating range (بەراورد بەUSB2514B/M2)
- MultiTRAK mixed-speed support (بەراورد بەUSB2514BT/M2)
تێبینییەکانی دیزاین
Route USB high-speed differential pairs as impedance-controlled traces over a continuous reference plane. Keep the upstream and downstream differential pairs as short and direct as practical, minimize stubs and test pads, and avoid routing them across split planes. The exact target impedance, length tolerance, and topology must be taken from the manufacturer layout guidance because these values are not present in the supplied web data.
The controller's verified operating range is 3 V to 3.6 V, but system power design must be handled separately from USB VBUS loading. Size local supply decoupling according to the datasheet and provide per-port VBUS switching where the reference design requires it. Budget the worst-case sum of downstream-device currents, connector losses, and inrush events rather than sizing the supply from controller quiescent current alone.
Do not treat the I/M2 and /M2 ordering suffixes as automatically identical without checking the exact ordering table. The supplied data gives strong drop-in evidence for USB2514BT-I/M2, but only related-family evidence for other suffixes. Confirm temperature grade, clock configuration, exposed-pad connection, USB transceiver settings, and qualification status against the exact manufacturer datasheet before releasing a production substitution.
زانیاری پابەندبوون
The supplied verified product and distributor snippets do not explicitly state the target part's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Compliance must be confirmed from the manufacturer product page or current product documentation.