XC4VLX15-10FFG676C - 13,824-LCE FPGA | AMD
MPN: XC4VLX15-10FFG676C ✓ چالاکXC4VLX15-10FFG676C گشتی
A field-programmable gate array is a semiconductor whose digital logic and interconnect functions are configured after fabrication. The FPGA category belongs to programmable logic devices and combines the programmability of a microcontroller-based system with parallel hardware acceleration. Within the AMD Virtex-4 product hierarchy, the XC4VLX15 belongs to the LX family, where logic cells, block RAM, dedicated multipliers, input/output capability, and package resources are balanced for general-purpose high-performance logic.
The device provides 13,824 logic cells and 1,536 configurable logic blocks for combinational and sequential digital implementation. Its 320 I/O positions support substantial board-level connectivity, while 884,736 embedded RAM bits support buffering, packet storage, and data-plane designs. The 1.2 V core voltage belongs to the lower-voltage programmable-logic environment, requiring the power architecture and decoupling strategy to be planned as an FPGA-specific design rather than as a conventional low-power IC.
The -10 suffix identifies the device speed grade within the Virtex-4 LX family. A 676-pin FCBGA provides substantial pin availability but requires a land grid with fine-pitch escape routing and careful via-in-pad or fanout design. Designers should preserve the device's supply, ground, decoupling, configuration, clock, and differential I/O requirements exactly as defined by the Virtex-4 package data and device documentation.
Typical uses include network interface controllers, telecommunications line cards, industrial data-acquisition systems, storage controllers, video-processing pipelines, and test equipment. The large logic-cell count and embedded memory make the part useful for parallel datapaths, protocol engines, and fixed-function digital subsystems that would otherwise require several programmable devices or complex discrete logic.
The primary design consideration is that a legacy 676-ball FPGA demands disciplined power integrity, thermal planning, configuration management, and PCB manufacturing capability. Validate layer stack-up, solder-mask and paste design, assembly yield, signal integrity, and thermal performance in the exact production stack-up before committing to a high-volume board.
This page organizes the device's key engineering facts, compares pin-compatible family options, and translates the FPGA's logic, memory, I/O, speed-grade, and packaging characteristics into practical selection guidance for engineers planning Virtex-4 LX implementations.
جێگرەوەکانی جێگۆڕکێ بۆ XC4VLX15-10FFG676C — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC4VLX15-10FFG676C (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Device Type, Architecture, Package Type, Speed Grade.
XC4VLX15-10FFG676I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC4VLX15-12FFG676C
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC4VLX15-10FF676C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC4VLX12-10FFG676C
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC4VLX16-10FFG676C
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XC4VLX25-10FFG676C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC4VLX15-10FFG676C زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Virtex-4 LX Field-Programmable Gate Array |
| Logic Elements | 13,824 logic cells |
| Configurable Logic Blocks | 1,536 CLBs |
| Input/Output Count | 320 I/O |
| Embedded RAM | 884,736 bits |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm CMOS |
| Speed Grade | -10 |
| پاکێج | 676-pin FCBGA |
| Architecture | ASMBL architecture |
| Programmable Logic Type | FPGA |
| Device Family | Virtex-4 LX |
| جۆری دامەزراندن | Surface mount |
| Lead-Free Status | Lead free |
| دۆخی RoHS | RoHS compliant |
ڕێنمایی ڕێکخستنی پینی XC4VLX15-10FFG676C 676-pin fcbga
ڕێکخستنی پین بۆ XC4VLX15-10FFG676C (پاکێجی 676-pin fcbga). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC4VLX15-10FFG676C.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC4VLX15-10FFG676C گونجاوە بۆ 6 بەکارھێنانs: Network Interface Controllers, Industrial Data Acquisition, Telecommunications Line Cards, Video Processing Pipelines, Storage and Cache Controllers, Test and Measurement Systems.
Network Interface Controllers
The XC4VLX15-10FFG676C fits network interface controllers that require parallel packet handling, buffering, and protocol-specific state logic. Its 13,824 logic cells and 884,736 embedded RAM bits allow datapath functions to operate concurrently rather than time-sharing a processor. The 320 I/O positions provide substantial board connectivity for packet memory, status signals, and control channels. Designers can instantiate multiple parallel lanes where the selected I/O standards, timing, and board-level channel requirements permit.
پێشنیارکراو
Industrial Data Acquisition
Industrial data-acquisition equipment benefits from the XC4VLX15-10FFG676C when multiple sensor channels must be sampled, filtered, buffered, and packaged for transmission. The FPGA's 13,824 logic cells support parallel acquisition pipelines and control state machines, while 884,736 RAM bits can hold channel data and intermediate results. Its 320 I/O positions simplify connection to converters, sensors, memory, and industrial interfaces. Timing closure must account for acquisition rate, clock distribution, and the exact speed grade.
پێشنیارکراو
Telecommunications Line Cards
The XC4VLX15-10FFG676C is suitable for telecommunications line-card logic that must perform framing, classification, buffering, and supervisory functions in parallel. Its 1,536 CLBs provide configurable logic for pipeline stages, while embedded RAM supports queues and packet storage. The large 320-I/O interface can accommodate parallel fabric connections, memory devices, and control signals. Production designs should verify I/O standards, clock-quality requirements, power sequencing, and thermal behavior for the installed equipment enclosure.
پێشنیارکراو
Video Processing Pipelines
Video processing is a strong fit for the XC4VLX15-10FFG676C because parallel pixel and packet processing can be mapped directly into CLBs and embedded RAM. The 13,824 logic cells support color conversion, scaling control, synchronization, and interface handling without relying on sequential processor execution. Its 320 I/O positions provide enough connectivity for video memories, converters, and control logic. The actual pixel rate and external memory interface must be validated against the selected package pins and timing constraints.
پێشنیارکراو
Storage and Cache Controllers
The XC4VLX15-10FFG676C can implement storage controllers, cache tags, command schedulers, and data-format conversion functions. Its 884,736 embedded RAM bits provide dedicated storage beyond the programmable logic fabric, while 320 I/O positions allow direct interaction with parallel memories and storage interfaces. The -10 grade supports timing-oriented designs, although sustained transfer rate still depends on memory timing, board topology, and clocking. Pin assignment and memory interface standards must be checked against the family documentation.
پێشنیارکراو
Test and Measurement Systems
Programmable test systems can use the XC4VLX15-10FFG676C for concurrent pattern generation, acquisition sequencing, and real-time analysis. The FPGA fabric allows test sequences and control algorithms to be updated without changing hardware, while embedded RAM captures buffers and intermediate measurements. Its 320 I/O positions support instrument interfaces, fixtures, and timing-sensitive logic. For high-speed tester applications, verify acquisition timing, I/O voltage tolerance, clock jitter requirements, and package-specific signal-integrity margins before release.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC4VLX15-10FFG676C — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC4VLX15-10FFG676I | XC4VLX15-12FFG676C | XC4VLX15-10FF676C | XC4VLX12-10FFG676C | XC4VLX16-10FFG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA |
| Product Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Speed Grade | -10 | -10 | -12 | -10 | -10 | -10 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Architecture | ASMBL architecture | ASMBL architecture | ASMBL architecture | ASMBL architecture | ASMBL architecture | ASMBL architecture |
جیاکەرەوە سەرەکییەکان
- Exact -10-grade family position (بەراورد بەXC4VLX15-12FFG676C)
- Same resource class with close ordering alternative (بەراورد بەXC4VLX15-10FFG676I)
- Balanced capacity versus neighboring LX devices (بەراورد بەXC4VLX16-10FFG676C)
- High I/O connectivity in a single Virtex-4 LX device (بەراورد بەXC4VLX12-10FFG676C)
تێبینییەکانی دیزاین
Use the AMD Virtex-4 package pinout files as the authority for all 676 ball assignments and follow the family's layer-transition rules for power, ground, configuration, and user I/O. The fine-pitch FCBGA requires explicit escape-routing strategy and stack-up validation. Keep high-speed routes away from power-distribution discontinuities and confirm drill, pad, solder-mask, and paste geometry against the selected assembly process.
Plan the 1.2 V core rail and auxiliary I/O supplies as a complete FPGA power tree rather than treating the FPGA as a single 1.2 V load. Follow the family reference design for regulator topology, sequencing, current capability, and decoupling. Place the smallest decoupling capacitors at the associated supply balls with very short ground returns, and verify dynamic current steps at the target clock and I/O activity before finalizing the distribution network.
Estimated thermal impact must be calculated from the selected power estimate, package thermal resistance, ambient temperature, and board heat-spreading area; these numerical inputs are not available here. Legacy FPGAs can consume substantial power when many CLBs and memories are active, so a production design should use realistic switching activity rather than only static configuration power. Add copper spreading, controlled airflow, and a heat-sink strategy when the calculated junction margin is inadequate.
Do not treat a matching 676-pin outline as proof of functional drop-in equivalence. Before substituting another Virtex-4 LX device, verify every ball function, power rail, configuration sequence, I/O standard, differential-capable pair, and bank voltage. A capacity change can also alter routing and timing even when the package outline remains unchanged. Complete synthesis, place-and-route, timing, and hardware validation for the exact replacement MPN.
زانیاری پابەندبوون
The component listing identifies the device as lead free and RoHS compliant. No automotive qualification or REACH, halogen-free, or conflict-minerals statement was identified.