XC7K160T-2FB676I - 162240-Cell -2 Kintex-7 FPGA | AMD
MPN: XC7K160T-2FB676I ✓ چالاکXC7K160T-2FB676I گشتی
A field-programmable gate array is a reconfigurable digital semiconductor that combines programmable logic blocks, block RAM, programmable input/output resources, dedicated processing resources, and programmable interconnect. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and provides hardware customization through configuration bitstreams. This makes an FPGA useful when a design needs parallel processing, high I/O density, deterministic digital interfaces, or field-updatable behavior.
The XC7K160T belongs to the Kintex-7 family and is identified by the -2 speed grade. Its 162240-cell architecture provides substantial logic capacity, while 400 I/O support interfaces to external memory, transceivers, converters, network controllers, and test equipment. The 1 V core supply and 28 nm process generation place the device between general-purpose programmable logic and larger, higher-cost Kintex designs that require more resources or greater I/O bandwidth.
The 676-pin FCBGA package supports dense board layouts and high pin availability, but it also demands careful ball assignment, multilayer PCB construction, and controlled power delivery. Unlike a small serial FPGA, this device supports a broad mix of parallel and serial connectivity. Its industrial-temperature suffix identifies it for applications requiring operation across an extended environmental range, while the -2 grade provides a defined performance class within the Kintex-7 portfolio.
Typical uses include industrial control systems, high-speed data acquisition, video and image processing, communications infrastructure, test and measurement equipment, and embedded signal-processing platforms. A video-processing design can use parallel logic for pixel pipelines and block RAM for line buffering. A communications design can partition serial transceivers, clocks, protocol logic, and supervisory functions across the programmable fabric while retaining the flexibility to update the bitstream during product maintenance.
PCB design should begin with the manufacturer’s package pinout and power requirements rather than treating all 676 balls as interchangeable. Separate clean and noisy supplies, place decoupling capacitors close to their associated supply balls, provide adequate via arrays beneath the BGA, and preserve high-speed return paths. Configuration storage, programming access, and a recovery strategy must also be planned because an FPGA depends on a valid bitstream before its configured logic becomes operational.
This product page combines the Kintex-7 device identity, package information, parameter-level comparisons, replacement guidance, and engineering design notes. It helps engineers distinguish speed-grade and package-suffix changes before committing to a 676-ball board design, while directing procurement requests through the Request a Quote form on this page.
جێگرەوەکانی جێگۆڕکێ بۆ XC7K160T-2FB676I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC7K160T-2FB676I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type, Logic Cells, Package, Speed Grade, Process Technology.
XC7K160T-2FBG676C
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7K160T-1FBG676I
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7K160T-1FBG676C
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7K160T-2FFG676I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7K160T-2FB676I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Kintex-7 field-programmable gate array (FPGA) |
| Logic Cells | 162240 cells |
| User I/O | 400 I/O |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Performance Speed Grade | -2 |
| Package Type | 676-pin FCBGA |
| Total Package Terminals | 676 terminals |
| Package Shape | Square |
| جۆری دامەزراندن | Surface mount |
| Terminal Type | BGA ball |
| FPGA Family | Kintex-7 |
| Programmable Logic Product | FPGA |
| Temperature Grade | Industrial |
ڕێنمایی ڕێکخستنی پینی XC7K160T-2FB676I square
ڕێکخستنی پین بۆ XC7K160T-2FB676I (پاکێجی square). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC7K160T-2FB676I.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC7K160T-2FB676I گونجاوە بۆ 6 بەکارھێنانs: Industrial Control and Automation, High-Speed Data Acquisition, Video and Image Processing, Communications Infrastructure, Test and Measurement Equipment, Aerospace and Defense Systems.
Industrial Control and Automation
The XC7K160T-2FB676I fits industrial control systems that require deterministic parallel logic, extensive I/O, and reconfigurable hardware. Its 162240 logic cells can support multiple control loops, state machines, diagnostics, and communication protocol blocks, while 400 user I/O provide connections to sensors, actuators, isolated transceivers, and discrete controllers. The 676-ball FCBGA keeps the device practical for a multilayer control board with dense routing. Engineers should use the industrial-grade suffix only after confirming the complete temperature range and power limits. A practical architecture partitions real-time acquisition, motion sequencing, safety interlocks, and supervisory logic into dedicated regions, then validates timing with the -2 speed grade before hardware release.
پێشنیارکراو
High-Speed Data Acquisition
The XC7K160T-2FB676I is suitable for parallel data-acquisition and signal-conditioning systems where sampling pipelines must operate deterministically. The 162240-cell Kintex-7 fabric can implement parallel-to-serial conversion, digital filtering, channel interleaving, trigger logic, and interface state machines, while 400 user I/O offer substantial connectivity to converters and capture memory. The -2 grade provides a defined performance class for timing-sensitive acquisition paths. Engineers should partition acquisition, processing, and storage-clock domains to limit crosstalk, then derive board-level timing from the actual pin assignments and external converter latency. This approach avoids treating a general microcontroller peripheral path as a substitute for a dedicated parallel fabric.
پێشنیارکراو
Video and Image Processing
The XC7K160T-2FB676I can implement parallel video pipelines, image filtering, color processing, frame synchronization, and test-pattern generation in programmable logic. Its 162240 logic cells support substantial fixed-function logic that might otherwise require several custom devices, and 400 user I/O allow direct connection to video serializers, memory interfaces, and display or camera interfaces. The 676-pin FCBGA provides the pin density required for wide buses and multiple external interfaces. Designers should establish clock domains for pixel, link, and memory traffic, constrain source-synchronous interfaces, and reserve timing margin for the -2 grade at the system’s highest operating temperature. External memory bandwidth and video timing must be evaluated together rather than sizing the FPGA only by logic-cell count.
پێشنیارکراو
Communications Infrastructure
The XC7K160T-2FB676I fits communications equipment requiring high logical parallelism, flexible I/O, and reconfigurable packet-processing functions. The Kintex-7 fabric can implement framing, classification, queue control, interpolation, monitoring, and interface adaptation, while 400 user I/O support parallel chips, network controllers, and high-speed transceivers. The 1 V core architecture requires a carefully partitioned power tree, and the 676-ball FCBGA demands controlled escape routing between external components and internal high-speed interfaces. For line-card designs, isolate each major clock domain, keep transceiver supply and reference distribution away from sensitive fabric routing, and verify eye and jitter margins with the actual channel. The -2 grade should be selected when post-route timing cannot tolerate the lower -1 performance class.
پێشنیارکراو
Test and Measurement Equipment
The XC7K160T-2FB676I is well suited to modular test and measurement platforms that combine sequencing, pattern generation, acquisition, and protocol handling. Its 162240 programmable cells allow multiple timing engines and decision logic to coexist, and 400 user I/O provide parallel connections to test fixtures, instruments, and memory. The -2 speed grade supports timing-critical paths, while the 676-ball FCBGA supports dense routing on a high-layer-count instrument PCB. A practical design separates analog measurement circuitry from digital control, provides independent clock and reset domains, and uses deterministic triggers across acquisition and pattern-generation blocks. Final timing closure should include instrument latency and fixture loading rather than relying on FPGA timing reports alone.
پێشنیارکراو
Aerospace and Defense Systems
The XC7K160T-2FB676I can support modular aerospace, defense, and rugged embedded systems that benefit from reconfigurable logic and extensive I/O. Its 162240-cell Kintex-7 architecture can host acquisition, navigation-data processing, command decoding, fault monitoring, and communication logic, while 400 user I/O support sensor buses, memory devices, and secure interfaces. The industrial-temperature ordering suffix is not by itself an aerospace qualification, so program-specific screening, radiation, reliability, and documentation requirements must be handled separately. Designers should establish a configuration architecture with authenticated storage and a recovery path, protect sensitive configuration access, and perform timing analysis across voltage and temperature corners. The dense FCBGA also requires assembly and inspection processes suitable for the system’s vibration and thermal environment.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC7K160T-2FB676I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC7K160T-2FBG676I | XC7K160T-2FBG676C | XC7K160T-1FBG676I | XC7K160T-1FBG676C | XC7K160T-2FFG676I | |
|---|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | |
| Package | 676-BBGA, FCBGA | 676-BBGA, FCBGA | 676-BBGA, FCBGA | 676-BBGA, FCBGA | 676-BBGA, FCBGA | 676-BBGA, FCBGA | 676-BBGA, FCBGA |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | |
| Logic Cells | 162240 cells | 162240 cells | 162240 cells | 162240 cells | 162240 cells | 162240 cells | |
| User I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V | |
| Performance Speed Grade | -2 | -2 | -2 | -1, one grade below target | -1, one grade below target | -2 | |
| Temperature Suffix | I, industrial grade | I, industrial grade | C, commercial grade | I, industrial grade | C, commercial grade | I, industrial grade |
جیاکەرەوە سەرەکییەکان
- Higher performance class than the -1 alternatives (بەراورد بەXC7K160T-1FBG676I)
- Industrial temperature suffix for extended environmental use (بەراورد بەXC7K160T-2FBG676C)
- Dense Kintex-7 resource and I/O combination (بەراورد بەXC7K160T-2FBG676I)
تێبینییەکانی دیزاین
Build the power tree around the manufacturer’s 1 V core requirement and separate rails. Place the required bulk and high-frequency decoupling directly across the associated supply balls, using multiple via connections to reduce inductance. Estimate dynamic and static demand with the actual bitstream, I/O state, clock activity, and temperature rather than using logic-cell count alone. Sequence rails according to the configuration requirements and verify power-up behavior across all supply combinations.
The 676-ball FCBGA requires a multilayer PCB with controlled escape routing, adequate layer transitions, and a via pattern that satisfies the manufacturer’s package guidance. Do not route signals directly beneath the BGA before completing layer-transition analysis. Preserve continuous return paths for high-speed interfaces, separate clocks from aggressile data routes, and plan test points, configuration access, and manufacturing inspection points into the board layout.
Heat flow depends on implemented logic, switching activity, I/O load, supply efficiency, and the board’s copper and via structure. Use the manufacturer power estimator after the design is utilization-complete, then compare worst-case dissipation with the PCB thermal model at the highest ambient temperature. Avoid treating the 676-ball package as an automatic heat sink; provide copper spreading and vias only where the package documentation and mechanical model support them.
A suffix-level substitution can change the package construction or temperature class even when the FPGA architecture is unchanged. Compare the complete ordering information, ball map, mechanical drawing, power states, configuration pins, and speed grade before releasing an alternative. For XC7K160T-2FB676I, a -1 candidate may retain the footprint but fail timing closure, while a C-suffix candidate may not meet the system’s environmental requirement.
زانیاری پابەندبوون
The product identity and industrial suffix are known, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited product records. AEC-Q100 is not applicable to this FPGA.