XMC4402F100K256BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4402F100K256BAXUMA1 ✓ چالاکXMC4402F100K256BAXUMA1 گشتی
A microcontroller is a semiconductor integrated circuit that combines a processor core, embedded memory, peripherals, and communication interfaces on one device. The Arm Cortex-M4 core places this XMC4000 part in the 32-bit embedded-controller hierarchy, where it supports real-time control, communications, and industrial automation. Compared with a general-purpose microprocessor, the MCU integrates dedicated peripherals and deterministic control resources close to the CPU, reducing system complexity and allowing firmware to execute directly from embedded flash.
The principal features of this MCU include a 120 MHz Cortex-M4 processor, 256 kByte of flash memory, and 80 kByte of SRAM. Its Ethernet interface expands the device beyond a basic real-time controller, enabling connected industrial equipment, network gateways, and embedded control nodes. The 100-pin LQFP package provides a high pin count suitable for mixed-signal, communication, and industrial peripheral requirements while retaining a familiar leaded surface-mount assembly format.
Architecturally, the Cortex-M4 processor supports efficient 32-bit computation and the exception-based control model used by embedded Arm Cortex-M devices. Integrating flash and SRAM allows substantial control code and working data to remain on-chip. The Ethernet capability creates a bridge between real-time control functions and network communication, allowing status information, commands, and diagnostic data to be exchanged without requiring a separate network controller in designs where appropriate.
Typical uses include industrial Ethernet controllers, factory automation equipment, networked sensor hubs, motor and motion-control systems, communications equipment, and embedded gateways. The combination of 120 MHz processing performance and Ethernet is particularly useful when control tasks must coexist with network protocol handling. In such systems, the MCU can sample process inputs, execute deterministic control logic, and exchange operational data through the integrated Ethernet interface.
PCB design should follow the Infineon pin-description and package information, paying particular attention to power-supply pins, ground distribution, high-speed Ethernet routing, and external-component placement. Keep the Ethernet differential pair geometry consistent, provide the required decoupling close to the device, and confirm unused-pin treatment directly against the manufacturer pin table before fabrication. Firmware development also requires the correct XMC4400-family device configuration, startup files, and peripheral library support for the selected silicon revision.
This product page consolidates the verified manufacturer identity, exact MPN ordering information, core memory capacity, processor speed, Ethernet capability, package details, drop-in candidates, application guidance, and engineering comparison points. It supports faster component selection while directing design validation back to the manufacturer documentation for final pin assignments, timing, electrical limits, and lifecycle decisions.
جێگرەوەکانی جێگۆڕکێ بۆ XMC4402F100K256BAXUMA1 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XMC4402F100K256BAXUMA1 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, Architecture, Ethernet Support, Flash Organization.
XMC4402-F100F256-BA
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
XMC4400F100K256BAXUMA2
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XMC4400F100K512BAXUMA1
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XMC4300F100K256AAXUMA1
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XMC4300F100K256AAXQMA1
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →XMC4402F100K256BAXUMA1 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| CPU Word Size | 32 bit |
| Embedded Flash Memory | 256 kByte |
| Flash Organization | 256K x 8 bit |
| Static RAM | 80 kByte |
| Communication Interface | 1 Ethernet interface |
| Product Family | XMC4000 |
| Device Designation | XMC4402-F100K256-BA |
| Qualification Segment | Industrial |
| پاکێج | PG-LQFP-100-25 |
| Total Terminals | 100 terminals |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Package Code | HLFQFP |
ڕێنمایی ڕێکخستنی پینی XMC4402F100K256BAXUMA1 hlfqfp
ڕێکخستنی پین بۆ XMC4402F100K256BAXUMA1 (پاکێجی hlfqfp). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XMC4402F100K256BAXUMA1.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XMC4402F100K256BAXUMA1 گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Gateway, Factory Automation Controller, Networked Sensor Hub, Motor and Motion Control, Communications Equipment, Embedded Data Acquisition System.
Industrial Ethernet Gateway
The XMC4402F100K256BAXUMA1 fits an industrial Ethernet gateway because its 120 MHz Arm Cortex-M4 core can process network traffic while executing real-time control tasks. The 256 kByte of embedded flash accommodates firmware, protocol handlers, configuration data, and diagnostic logic, while 80 kByte of SRAM supports packet buffers and working memory. The integrated Ethernet capability reduces the need for a separate network controller in suitably partitioned designs. Place the Ethernet differential pair as a controlled impedance route, provide the required magnetics or PHY interface specified by the reference design, and use the manufacturer pin table to assign supplies and interfaces before layout release.
پێشنیارکراو
Factory Automation Controller
The Infineon XMC4402F100K256BAXUMA1 is appropriate for a factory automation controller combining deterministic control with plant-level communications. Its 120 MHz Cortex-M4 processor provides computational headroom for sequencing, diagnostics, and communication routines, while 256 kByte of flash and 80 kByte of SRAM support a structured industrial firmware design. Ethernet allows the controller to exchange commands and status information with supervisory equipment. Validate isolation, surge withstand, grounding, and network timing according to the installation requirements. Keep sensitive analog and communication routing separated from switching nodes and follow the manufacturer reference layout for decoupling and exposed thermal or power structures.
پێشنیارکراو
Networked Sensor Hub
A networked sensor hub can use the XMC4402F100K256BAXUMA1 to aggregate measurements, perform local filtering, and publish results over Ethernet. The 32-bit Cortex-M4 core is suitable for time-based signal processing, while 256 kByte of flash stores application firmware and 80 kByte of SRAM handles active acquisition and communication buffers. Ethernet provides a single interface for configuration, data transfer, and remote diagnostics. Select sensor inputs and external interface components with suitable voltage, isolation, and accuracy characteristics. In a mixed-signal layout, keep high-impedance sensor paths away from Ethernet and switching circuitry, and validate grounding so sensor measurements are not influenced by digital return currents.
پێشنیارکراو
Motor and Motion Control
The XMC4402F100K256BAXUMA1 can serve as the central controller in a connected motor or motion-control subsystem. Its 120 MHz Cortex-M4 processing rate supports timing loops and supervisory logic, and the available flash and SRAM accommodate control algorithms, parameter storage, and communications. Integrated Ethernet allows motion status, fault information, and configuration commands to be exchanged with a supervisory controller. The choice of motor-drive power stage remains external to the MCU, so its voltage, current, isolation, and thermal requirements must be matched separately. Follow the manufacturer pin-description table for timer, communication, and debug assignments, and confirm switching-node separation to preserve signal integrity.
پێشنیارکراو
Communications Equipment
The XMC4402F100K256BAXUMA1 is suitable for communications equipment that combines a real-time control processor with Ethernet connectivity. Its 32-bit Cortex-M4 architecture supports protocol processing and system tasks, while the 256 kByte flash and 80 kByte SRAM provide embedded resources for a compact communications design. A connected communications module can transfer configuration, status, and diagnostic information while retaining local control autonomy. Use the manufacturer Ethernet reference design as the basis for termination, magnetics, clocking, and layout decisions. Test signal integrity across operating temperature and supply ranges, and verify that protocol timing and interrupt latency remain acceptable under the intended network load.
پێشنیارکراو
Embedded Data Acquisition System
The Infineon XMC4402F100K256BAXUMA1 can act as the control and networking processor in an embedded data-acquisition system. Its 120 MHz Cortex-M4 core handles sampling coordination, scaling, status monitoring, and Ethernet-based data transfer, while 256 kByte of flash and 80 kByte of SRAM support firmware and acquisition buffers. The industrial device designation and Ethernet interface make it appropriate for connected instrumentation that must combine real-time acquisition with remote configuration. External analog front ends determine the actual input range, bandwidth, and accuracy. Keep those paths short and isolated from digital return currents, provide local regulation with appropriate stability, and verify timing margins for the selected conversion and communication interfaces.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XMC4402F100K256BAXUMA1 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XMC4402-F100F256-BA | XMC4400F100K256BAXUMA2 | XMC4400F100K512BAXUMA1 | XMC4300F100K256AAXUMA1 | XMC4300F100K256AAXQMA1 |
|---|---|---|---|---|---|---|
| Package | PG-LQFP-100-25 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Embedded Flash Memory | 256 kByte | 256 kByte | 256 kByte | 512 kByte | 256 kByte | 256 kByte |
| Product Family | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 |
| Number of Terminals | 100 terminals | 100 terminals | 100 terminals | 100 terminals | 100 terminals | 100 terminals |
جیاکەرەوە سەرەکییەکان
- Higher memory option within the same Infineon controller platform (بەراورد بەXMC4400F100K256BAXUMA2)
- Direct XMC4402 family alignment (بەراورد بەXMC4400F100K256BAXUMA2)
- Same-package XMC4000 migration options (بەراورد بەXMC4300F100K256AAXUMA1)
تێبینییەکانی دیزاین
Use the manufacturer PG-LQFP-100-25 package drawing and the exact device pin table as the authority for land patterns and assignments. The device combines high pin count with Ethernet and multiple supply domains, so place local decoupling capacitors at the corresponding pins, provide a continuous ground-plane path, and route sensitive inputs away from switching and Ethernet return currents. Do not release the layout until every NC, supply, clock, reset, debug, and unused peripheral pin has been reviewed.
Apply controlled-impedance routing to the Ethernet differential pair and follow the manufacturer reference layout for pair symmetry, length matching, grounding, and isolation components. Avoid placing test pads or unrelated high-speed traces in the Ethernet region. If the MCU connects to an external PHY through a short interface, keep that interface short and verify return-path continuity. Signal-integrity performance depends on the complete board stack-up and external network design, not only the MCU package.
Do not assume that another 100-pin XMC4000 device is electrically interchangeable merely because the package matches. Compare clock pins, supply pins, analog channels, communication assignments, debug interfaces, and unused-pin requirements for the exact suffix. The XMC4402, XMC4400, and XMC4300 derivatives can differ in peripheral allocation, so a replacement should be tested with the original board schematic, startup configuration, peripheral library, and Ethernet firmware before production use.
Plan the supply network for both processor operation and Ethernet-interface requirements. Place regulator output and decoupling paths so the controller and any external PHY share a low-impedance return without introducing long current loops through sensitive board regions. Review each power pin's required voltage and sequencing condition in the manufacturer documentation before selecting passive components. An estimate is not used here because the exact external network and operating conditions are application-dependent.
زانیاری پابەندبوون
The device is identified as an industrial XMC4000 microcontroller, but the cited product summaries do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to the stated industrial classification.