AD621ANZ vs INA128PA Comparison
Detailed side-by-side comparison of AD621ANZ by Analog Devices and INA128PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | AD621ANZ | INA128PA |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Instrumentation Amplifier | Precision instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Package | 8-pin PDIP (0.300 inch, 7.62 mm pitch) | 8-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Packaging Type | Tube | — |
| Small-Signal Bandwidth | 800 kHz at -3 dB | — |
| Slew Rate | 1.2 V/µs | — |
| Maximum Supply Current | 1.3 mA | — |
| Input Bias Current | 500 pA | — |
| Input Offset Voltage | 75 µV | — |
| Operating Temperature Range | -40°C to +85°C | — |
| Output Type | [DATA_NEEDED: output type] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Gain Range | [DATA_NEEDED: gain range] | 1 to 10,000 |
| Input Common-Mode Rejection | [DATA_NEEDED: input common-mode rejection] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Halogen-Free Status | Compliant | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | — |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Common-Mode Rejection Ratio | — | 130 dB |
| Minimum Common-Mode Rejection | — | 120 dB |
| Quiescent Current | — | 700 µA |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Input Protection | — | ±40 V |
| Supply Range | — | Up to ±18 V |
| Gain Setting | — | Single external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Operating Temperature | — | -40°C to +85°C |