AD621ANZ vs INA128PA Comparaison

Comparaison détaillée côte à côte de AD621ANZ par Analog Devices et INA128PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
INA128PA INA128PA - 130dB CMRR Low-Power INA | Texas Instruments

INA128PA - 130dB CMRR Low-Power INA | Texas Instruments

INA128PA ✓ Actif

Comparaison des spécifications

Paramètre AD621ANZ INA128PA
Marque Analog Devices Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Product Type Instrumentation Amplifier Precision instrumentation amplifier
Number of Circuits 1 circuit 1 circuit
Boîtier 8-pin PDIP (0.300 inch, 7.62 mm pitch) 8-pin PDIP
Type de montage Through-hole Through-hole
Packaging Type Tube —
Small-Signal Bandwidth 800 kHz at -3 dB —
Slew Rate 1.2 V/µs —
Maximum Supply Current 1.3 mA —
Input Bias Current 500 pA —
Input Offset Voltage 75 µV —
Plage de température de fonctionnement -40°C to +85°C —
Type de sortie [DATA_NEEDED: output type] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Gain Range [DATA_NEEDED: gain range] 1 to 10,000
Input Common-Mode Rejection [DATA_NEEDED: input common-mode rejection] —
Maximum Input Voltage [DATA_NEEDED: maximum input voltage] —
Halogen-Free Status Compliant —
Statut RoHS [DATA_NEEDED: RoHS status] —
Architecture — Three-op-amp instrumentation amplifier
Common-Mode Rejection Ratio — 130 dB
Minimum Common-Mode Rejection — 120 dB
Courant de repos — 700 µA
Maximum Input Offset Voltage — 50 µV
Maximum Input Voltage Drift — 0.5 µV/°C
Maximum Input Bias Current — 5 nA
Input Protection — ±40 V
Supply Range — Up to ±18 V
Gain Setting — Single external resistor
Bandwidth at Gain 100 — 200 kHz
Green Product — Yes
Restricted Substances — No Sb/Br
Température de fonctionnement — -40°C to +85°C

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis