AD8017ARZ vs AD8015ARZ Comparison

Detailed side-by-side comparison of AD8017ARZ by Analog Devices and AD8015ARZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Analog Devices
AD8017ARZ AD8017ARZ - Dual High-Speed 200mA Op Amp | Analog Devices

AD8017ARZ - Dual High-Speed 200mA Op Amp | Analog Devices

AD8017ARZ ✓ Active
Analog Devices
AD8015ARZ AD8015ARZ - 240MHz Differential TIA | Analog Devices

AD8015ARZ - 240MHz Differential TIA | Analog Devices

AD8015ARZ ✓ Active

Specification Comparison

Parameter AD8017ARZ AD8015ARZ
Brand Analog Devices Analog Devices
Category Amplifier ICs Amplifier ICs
Lifecycle Status Active Active
Amplifier Type Dual high-speed current-feedback operational amplifier —
Number of Channels 2 channels —
Number of Circuits 2 circuits —
Supply Current per Amplifier 7 mA —
Optimized Supply +12 V —
Output Current per Amplifier 200 mA typical —
Output Swing Within 1.0 V of the supply rail —
Maximum Output Swing 10 V peak-to-peak —
Load Capability Low-distortion drive of 100 ohm and capacitive loads —
Package 8-lead SOIC 8-pin SOIC
Pin Count 8 pins —
Mounting Type Surface mount Surface mount
Primary Application Single-supply xDSL CPE line driving Fiber-optic receiver
Lead-Free Package Option AD8017ARZ and AD8017ARZ-REEL —
Evaluation Board AD8017AR-EVAL —
Operating Temperature Range [DATA_NEEDED: operating temperature range] [DATA_NEEDED: Operating Temperature Range]
Supply Voltage Range [DATA_NEEDED: supply voltage range] [DATA_NEEDED: Supply Voltage Range]
Gain-Bandwidth Product [DATA_NEEDED: gain-bandwidth product] —
Input Offset Voltage [DATA_NEEDED: input offset voltage] —
RoHS Status unknown [DATA_NEEDED: RoHS Status]
REACH Status unknown [DATA_NEEDED: REACH Status]
AEC-Q100 Qualification not_applicable [DATA_NEEDED: AEC-Q100 Qualification]
Product Type — Single-supply differential-output transimpedance amplifier
Bandwidth — 240 MHz
Supported Data Rate — Up to 155 Mbps
Pulse Width — 500 ps
Rise Time — 1.5 ns
Fall Time — 1.5 ns
Output Configuration — Differential voltage
Input Type — Photodiode current input
Supply Configuration — Single supply
Optical Protocol Application — FDDI receiver
Telecommunications Application — SONET/SDH receiver
Input Transimpedance — [DATA_NEEDED: Input Transimpedance]

Datasheets & Resources

Browse All Products Create BOM Request Quote