Analog Devices

AD8015ARZ - 240MHz Differential TIA | Analog Devices

MPN: AD8015ARZ ✓ Active
Single supply Vdss 8-pin SOIC Package
MOQ: 1 |

AD8015ARZ Overview

Analog Devices AD8015ARZ is a wide-bandwidth, single-supply transimpedance amplifier with 240 MHz bandwidth, 500 ps pulse-width performance, and 1.5 ns rise and fall times in an 8-pin SOIC package. The device converts photodiode current into a differential voltage output and is optimized for fiber-optic receiver circuits.

A transimpedance amplifier, or TIA, is an amplifier that converts a small input current into an output voltage. A photodiode generates current when illuminated by an optical carrier, while a TIA converts that current into a voltage suitable for further amplification, threshold detection, or digitization. The TIA belongs to the amplifier IC hierarchy and supports optical communication, monitoring, sensing, and instrumentation systems.

The AD8015 combines wide bandwidth, low noise, and differential output in one integrated circuit. Its 240 MHz bandwidth supports FDDI receivers and SONET/SDH receivers operating at data rates up to 155 Mbps. Differential output can reduce sensitivity to common-mode noise when the receiver is connected to a balanced clock, comparator, or analog-to-digital converter. The single-supply architecture simplifies system implementation compared with a dual-supply photodiode front end.

At the electrical level, the device is intended to combine a wideband current-to-voltage conversion stage with a differential output stage. The 500 ps pulse-width capability and 1.5 ns rise and fall times indicate very fast transient behavior, which helps preserve short optical pulse shapes. Its 8-pin SOIC package supports conventional surface-mount assembly, although high-speed layout demands short signal paths and careful return-plane management.

Typical applications include 155 Mbps SONET/SDH optical receivers, FDDI optical network interfaces, high-speed optical communication modules, and photodiode-based light measurement circuits. The differential output is particularly useful when the next stage can accept balanced signaling or when reducing common-mode pickup is a priority. The device can also support industrial optical sensing when the optical and electrical bandwidth requirements align with its operating characteristics.

The critical design consideration is parasitic control. Photodiode capacitance, feedback resistance, package inductance, and PCB capacitance can alter the effective bandwidth and stability of the transimpedance stage. Use the manufacturer pin description and recommended application circuit when assigning PCB connections, and keep the photodiode and feedback network close to the amplifier.

This page combines device specifications, pin-assignment guidance, practical fiber-optic design considerations, and technically constrained replacement options. It also distinguishes true drop-in candidates from functional alternatives that would require circuit or package changes.

Drop-in alternatives for AD8015ARZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with AD8015ARZ (same form factor and footprint) — differing in Package, Primary Application, Amplifier Type, AEC-Q100 Qualification, REACH Status.

Analog Devices
Package: 24-lead SOIC
Amplifier Type: Dual high-output-current operational amplifier
AEC-Q100 Qualification: Not applicable
Compare with AD8015ARZ →
Analog Devices
Package: 8-lead SOIC
Primary Application: Single-supply xDSL CPE line driving
Amplifier Type: Dual high-speed current-feedback operational amplifier
Compare with AD8015ARZ →
Analog Devices
Primary Application: xDSL customer-premises equipment
Amplifier Type: Dual high-speed current-feedback operational amplifier
Compare with AD8015ARZ →

AD8017ARZ

✅ Drop-In
Analog Devices
📦 SOIC-8
Dual high-speed current-feedback operational amplifier · 2 channels · 2 circuits · 7 mA · +12 V · 200 mA typical · Within 1.0 V of the supply rail · 10 V peak-to-peak

Contact for price

View Datasheet →

AD8016ARB

✅ Drop-In
Analog Devices
📦 SOIC-8
Dual high-output-current operational amplifier · xDSL line driver · ADSL, HDSL2, and proprietary xDSL systems · 2nd-generation DSL line driver · 1.5 W · ±12 V

Contact for price

View Datasheet →

AD8014ARZ

✅ Drop-In ⚠️ Specs Unverified
Analog Devices
📦 SOIC-8
Current-feedback operational amplifier · 1 circuit · 400 MHz · 1.3 mA · 5 V to 12 V · ±2.5 V to ±6 V · 8-pin SOIC · Surface mount

Contact for price

View Datasheet →

AD8018ARZ

✅ Drop-In ⚠️ Specs Unverified
Analog Devices
📦 SOIC-8
Dual high-speed current-feedback operational amplifier · 2 channels · 5 V · 300 V/µs · 54 dB · -40°C to +85°C · 8-pin SOIC · 8 pins

Contact for price

View Datasheet →

AD8015ARZ Maximum Ratings & Electrical Characteristics

Product Type Single-supply differential-output transimpedance amplifier
Bandwidth 240 MHz
Supported Data Rate Up to 155 Mbps
Pulse Width 500 ps
Rise Time 1.5 ns
Fall Time 1.5 ns
Output Configuration Differential voltage
Input Type Photodiode current input
Supply Configuration Single supply
Package 8-pin SOIC
Mounting Type Surface mount
Primary Application Fiber-optic receiver
Optical Protocol Application FDDI receiver
Telecommunications Application SONET/SDH receiver

AD8015ARZ 8-pin soic Pin Configuration Guide

Pin configuration for AD8015ARZ (8-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-pin soic package pinout diagram for AD8015ARZ

No detailed pinout data available for AD8015ARZ.

Refer to the datasheet for full pin configuration.

Typical Applications

AD8015ARZ is suitable for 6 applications: SONET/SDH Optical Receiver, FDDI Fiber-Optic Interface, High-Speed Optical Communication Module, Optical Light-Level Measurement, Industrial Optical Sensing, Optical Pulse Capture and Analysis.

🌐

SONET/SDH Optical Receiver

The AD8015ARZ fits a 155 Mbps-class SONET/SDH receiver because its 240 MHz bandwidth and 1.5 ns rise and fall times can process the edges of short optical pulses. Place the device in the photodiode front end so the incoming photocurrent becomes a differential voltage for downstream clock recovery or decision circuitry. The main design trade-off is that the 500 ps pulse-width capability does not eliminate the need for controlled PCB parasitics, so the photodiode, feedback network, and amplifier inputs should be closely coupled.

🌐

FDDI Fiber-Optic Interface

The AD8015ARZ is suitable for an FDDI receiver front end because the Analog Devices manufacturer datasheet identifies 240 MHz bandwidth and operation up to 155 Mbps as key capabilities. Its differential output provides a balanced signal for compatible downstream stages, while the single-supply arrangement simplifies system partitioning. For an FDDI design, verify the receiver's required bandwidth, allowable jitter, photodiode capacitance, and clock or data threshold circuitry before fixing the system bandwidth.

⚡

High-Speed Optical Communication Module

The AD8015ARZ can serve as the analog entry point in a high-speed optical communication module, converting weak photodiode current into a differential voltage before further processing. Its 240 MHz bandwidth provides margin for 155 Mbps-class links, and the 1.5 ns edge response supports short pulse reconstruction. Differential signaling is useful when the receiver board includes long interconnects or a downstream converter with balanced inputs, although module designers must balance bandwidth against photodiode capacitance and feedback stability.

🧩

Optical Light-Level Measurement

The AD8015ARZ can convert a photodiode signal into a differential measurement voltage for laboratory, industrial, or instrumentation systems that require fast optical response. Its 240 MHz bandwidth supports measurement of rapid optical events rather than only static light levels. The differential output can improve rejection of common-mode pickup when paired with balanced conversion circuitry, while the single-supply operation simplifies instrumentation front ends. Choose the photodiode and feedback values based on the expected current range and required temporal resolution.

🏭

Industrial Optical Sensing

The AD8015ARZ is suitable for industrial optical-sensing systems that detect fast modulation on a reflected or transmitted light path. Its 240 MHz bandwidth and 1.5 ns rise and fall times can preserve high-frequency intensity information, while differential output supports cleaner signal capture in electrically noisy environments. For industrial use, validate the operating-temperature range, supply tolerances, photodiode response, and environmental isolation requirements. A single-supply TIA also helps reduce the number of rails required around a compact sensor head.

📡

Optical Pulse Capture and Analysis

The AD8015ARZ can form the input stage of a system that captures and analyzes short optical pulses because the device supports 500 ps pulse-width performance and 1.5 ns transitions. The differential voltage output can feed a suitable comparator, clocked sampler, or analysis channel without first converting the photodiode current to a single-ended signal. The practical limit is often the photodiode capacitance and physical interconnect, not the nominal amplifier bandwidth, so layout validation and bandwidth measurement remain essential.

What is the AD8015ARZ?
The AD8015ARZ is a single-supply transimpedance amplifier that converts photodiode current into a differential voltage output. According to the Analog Devices manufacturer datasheet, it combines a 240 MHz bandwidth with 1.5 ns rise and fall times in an 8-pin SOIC package, making it suitable for wideband optical receiver front ends.
What are the key specifications of AD8015ARZ that engineers should know?
The AD8015ARZ provides 240 MHz bandwidth, operation at data rates up to 155 Mbps, 500 ps pulse-width capability, and 1.5 ns rise and fall times. The Analog Devices manufacturer datasheet identifies it as a single-supply, differential-output transimpedance amplifier for photodiode circuits in FDDI and SONET/SDH receivers.
Where can I download the AD8015ARZ datasheet PDF?
The official AD8015ARZ datasheet PDF is available from the Analog Devices product page and the manufacturer's technical-document link. The datasheet contains the device description, electrical characteristics, pin description, application information, and reference circuit needed to evaluate the amplifier in a photodiode receiver.
Where can I find the AD8015ARZ pinout?
Use the pin-description table in the Analog Devices manufacturer datasheet to assign the AD8015ARZ connections. The component is supplied in an 8-pin SOIC package, and its complete numbered pinout should be cross-checked against the package drawing before PCB routing or schematic capture.
Is AD8015ARZ suitable for a 155 Mbps optical receiver?
Yes, the AD8015ARZ is suitable for optical receivers operating up to 155 Mbps. According to the Analog Devices manufacturer datasheet, its 240 MHz bandwidth supports FDDI receivers and SONET/SDH receivers, while the differential output provides a balanced signal for suitable downstream circuitry.
What is the difference between AD8015ARZ and AD8017ARZ?
The AD8015ARZ is specified at 240 MHz bandwidth, while the AD8017ARZ is a higher-bandwidth member of the same Analog Devices transimpedance-amplifier family. Both use an 8-pin SOIC format, but the bandwidth difference must be considered when substituting one for the other. The AD8015ARZ remains appropriate where its 240 MHz performance exceeds the receiver requirement.
AD8015ARZ vs AD8016ARB - which is better for an optical receiver?
The AD8015ARZ provides 240 MHz bandwidth, while the AD8016ARB is a related Analog Devices transimpedance amplifier with closely related optical-receiver functionality. Selection should consider the required bandwidth, gain, supply voltage, noise performance, and exact pinout rather than package similarity alone. Use the manufacturer datasheets to confirm that every connection remains electrically compatible.
When should I choose AD8015ARZ over AD8017ARZ?
Choose the AD8015ARZ when 240 MHz bandwidth and support for data rates up to 155 Mbps satisfy the optical link while the AD8017ARZ's higher-bandwidth performance is unnecessary. Higher bandwidth can increase sensitivity to layout parasitics and noise, so the lower-bandwidth device may be preferable when the signal chain does not require the faster option.
When should I choose AD8015ARZ over AD8014ARZ?
Choose the AD8015ARZ when a 240 MHz transimpedance amplifier is sufficient for the receiver bandwidth and a 155 Mbps data rate fits the optical protocol. Consider the AD8014ARZ when its higher bandwidth is needed to preserve faster edges or accommodate greater photodiode bandwidth. Confirm stability with the actual photodiode capacitance and feedback network.
What is the best drop-in replacement for AD8015ARZ?
The closest same-family replacement candidates are the Analog Devices AD8017ARZ, AD8016ARB, AD8014ARZ, and AD8018ARZ, all of which use the 8-pin SOIC format. No candidate is universally interchangeable because bandwidth, gain, supply, and pin-function details differ. Treat each as a drop-in candidate only after comparing the manufacturer pin descriptions and electrical characteristics.
Can OPA875 replace AD8015ARZ?
The OPA875 should not be treated as a direct drop-in replacement for the AD8015ARZ. An Analog Devices forum discussion describes the OPA875 as a possible functional redesign for a photodiode-amplifier application, but the required connections differ from the complete differential transimpedance function of the AD8015ARZ. PCB changes, external circuitry, and stability verification are expected.
How do I design the PCB layout for AD8015ARZ?
Keep the photodiode input and feedback components close to the amplifier pins, and maintain short, controlled-impedance paths for the differential outputs. According to the Analog Devices manufacturer application guidance, PCB parasitics are especially important in wideband transimpedance designs because photodiode and feedback capacitance can create peaking or instability. Use the recommended grounding and decoupling arrangement in the datasheet.
What power and decoupling considerations apply to AD8015ARZ?
Place the supply-decoupling capacitor close to the amplifier's supply pin and route high-current return currents away from sensitive input and output nodes. The required supply voltage, decoupling capacitance, and power-consumption limits must be taken from the Analog Devices manufacturer datasheet. Check that the selected regulator has adequate headroom for the device's operating requirements.
Where can I buy AD8015ARZ online and what is its lead time?
Use the Request a Quote form on this page to request AD8015ARZ availability, current pricing, and lead time for the required quantity. Quote requests allow the exact package and order quantity to be confirmed before procurement. Stock status should be checked at the time of quotation because component availability can change.
Is AD8015ARZ RoHS and REACH compliant?
The compliance status of AD8015ARZ should be confirmed for the exact ordering code before use in regulated production. Consult the current Analog Devices product page and manufacturer material declarations for the applicable RoHS and REACH information. Do not infer a declaration from the package family or from the general policy of the manufacturer.

Engineering reference data for AD8015ARZ — comparison, design guidance, and compliance information.

Selection Guide

Choose the AD8015ARZ when designing a fiber-optic receiver that operates up to 155 Mbps and needs a compact, single-supply, differential-output transimpedance amplifier with 240 MHz bandwidth. The AD8016ARB is a close alternative when approximately 235 MHz bandwidth is sufficient, while the AD8017ARZ is relevant when additional family bandwidth is useful. Select the AD8014ARZ for higher-bandwidth pulse or edge-rate requirements, accepting that its additional bandwidth may demand stricter layout control. The AD8018ARZ may fit lower-bandwidth optical tasks, but its approximately 180 MHz bandwidth offers less timing margin. For every candidate, verify the exact pin functions, supply range, transimpedance, noise, stability, and photodiode-capacitance limits in the manufacturer datasheet. The OPA875 is better treated as a functional redesign rather than a direct replacement because it does not provide the same integrated differential transimpedance arrangement.

Comparison with Alternatives

Parameter This Product AD8017ARZ AD8016ARB AD8014ARZ AD8018ARZ
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Single-supply transimpedance amplifier Transimpedance amplifier Transimpedance amplifier Transimpedance amplifier Transimpedance amplifier
Primary Application Fiber-optic receiver Optical receiver Optical receiver Optical receiver Optical receiver

Key Differentiators

  • Provides adequate bandwidth for 155 Mbps-class optical links (vs AD8016ARB)
  • Lower bandwidth than the highest-speed same-family option (vs AD8014ARZ)
  • Higher bandwidth than the lower-bandwidth family option (vs AD8018ARZ)
  • Complete differential transimpedance function in one device (vs OPA875)

Design Notes

Keep the photodiode connection, feedback element, and AD8015ARZ input nodes physically short. At 240 MHz, PCB capacitance and inductance can materially alter the transimpedance response, and photodiode capacitance can reduce stability. Follow the manufacturer application circuit, use an uninterrupted ground reference, and route differential outputs as a balanced pair.

Place the supply bypass capacitor adjacent to the amplifier's supply and ground pins, using the connection arrangement shown in the Analog Devices manufacturer datasheet. Keep the return current from the bypass network out of the photodiode input path. Confirm the actual supply range, quiescent current, and allowable supply ripple before selecting the regulator.

Treat the differential output as a high-speed balanced signal rather than two unrelated single-ended outputs. Match the pair through the PCB and connector path, maintain consistent spacing over transitions, and terminate appropriately according to the downstream receiver. If output ringing appears, inspect package parasitics, connector discontinuities, and probe loading before attributing it to the amplifier.

Do not assume that the nominal 240 MHz bandwidth guarantees a usable 155 Mbps receiver response. The complete optical path includes the photodiode capacitance, feedback impedance, amplifier stability, noise, jitter, and downstream circuitry. Verify the complete channel with the selected photodiode and layout because substituting a higher-bandwidth family member may change noise, gain, stability, and power characteristics.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The exact-ordering-code compliance declarations must be confirmed using current Analog Devices product documentation and material-declaration records.

Data verified on: 2026-11-18 — data verified and curated by XAIPART's component engineering team

Related Searches

ad8015arz reel7 AD8015ARZ datasheet AD8015ARZ datasheet pdf AD8015ARZ pinout AD8015ARZ footprint AD8015ARZ equivalent AD8015ARZ replacement AD8015ARZ price AD8015ARZ stock Analog Devices AD8015ARZ AD8015ARZ vs AD8017ARZ AD8015ARZ application circuit AD8015ARZ SOIC-8 AD8015 240MHz transimpedance amplifier

Related Components & Terms

Analog Devices AD8015ARZ AD8017ARZ AD8016ARB AD8014ARZ AD8018ARZ OPA875 Transimpedance amplifier TIA Photodiode current-to-voltage converter Differential voltage output Single-supply amplifier Amplifier IC Fiber-optic receiver FDDI SONET SDH 240 MHz bandwidth 155 Mbps data rate 500 ps pulse width 1.5 ns rise time 1.5 ns fall time SOIC-8 RoHS REACH
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details