AD842KN vs AD842KH Comparison
Detailed side-by-side comparison of AD842KN by Analog Devices and AD842KH by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | AD842KN | AD842KH |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Wideband operational amplifier | — |
| Amplifier Architecture | Current-feedback amplifier | — |
| Process Technology | Junction-isolated complementary bipolar (CB) process | Junction-isolated complementary bipolar (CB) process |
| Number of Circuits | 1 amplifier | — |
| Gain-Bandwidth Product | 80 MHz | 80 MHz at gain of 2 |
| Supply Voltage Range | ±5 V to ±18 V | [DATA_NEEDED: supply voltage range] |
| Package Type | 14-pin PDIP | — |
| Package Dimensions | 0.300 inch (7.62 mm) body width | — |
| Mounting Type | Through-hole | — |
| Input Offset Voltage | 1500 uV maximum | — |
| Supply Current | 6 uA typical | — |
| Input Noise Current | 3.5 uA | — |
| Common-Mode Rejection | 115 dB | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | 375 V/µs |
| Output Current | [DATA_NEEDED: maximum output current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 8 µA |
| Full-Power Bandwidth | [DATA_NEEDED: full-power bandwidth] | 6.0 MHz at 20 V peak-to-peak output |
| RoHS Status | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance status] |
| Amplifier Type | — | Single-channel operational amplifier |
| Settling Time | — | 0.01% settling for a 10 V step |
| Maximum Input Offset Voltage | — | 1 mV |
| Offset Voltage Listing Value | — | 1.5 mV |
| Minimum Stable Gain | — | 2 |
| Package | — | TO-8-12 |
| Number of Channels | — | 1 channel |
| Output Current Capability | — | [DATA_NEEDED: output current rating] |
| Input Offset Drift | — | [DATA_NEEDED: input offset voltage drift] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |