AD842KN vs AD842KH השוואה
השוואה מפורטת זה לצד זה של AD842KN מאת Analog Devices ו AD842KH מאת Analog Devices. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
השוואת מפרטים
| פרמטר | AD842KN | AD842KH |
|---|---|---|
| מותג | Analog Devices | Analog Devices |
| קטגוריה | Amplifier ICs | Amplifier ICs |
| סטטוס מחזור חיים | פעיל | פעיל |
| Product Type | Wideband operational amplifier | — |
| Amplifier Architecture | Current-feedback amplifier | — |
| Process Technology | Junction-isolated complementary bipolar (CB) process | Junction-isolated complementary bipolar (CB) process |
| Number of Circuits | 1 amplifier | — |
| Gain-Bandwidth Product | 80 MHz | 80 MHz at gain of 2 |
| Supply Voltage Range | ±5 V to ±18 V | [DATA_NEEDED: supply voltage range] |
| Package Type | 14-pin PDIP | — |
| Package Dimensions | 0.300 inch (7.62 mm) body width | — |
| סוג הרכבה | Through-hole | — |
| Input Offset Voltage | 1500 uV maximum | — |
| זרם אספקה | 6 uA typical | — |
| Input Noise Current | 3.5 uA | — |
| Common-Mode Rejection | 115 dB | — |
| טווח טמפרטורת פעולה | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | 375 V/µs |
| Output Current | [DATA_NEEDED: maximum output current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 8 µA |
| Full-Power Bandwidth | [DATA_NEEDED: full-power bandwidth] | 6.0 MHz at 20 V peak-to-peak output |
| סטטוס RoHS | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance status] |
| Amplifier Type | — | Single-channel operational amplifier |
| Settling Time | — | 0.01% settling for a 10 V step |
| Maximum Input Offset Voltage | — | 1 mV |
| Offset Voltage Listing Value | — | 1.5 mV |
| Minimum Stable Gain | — | 2 |
| מארז | — | TO-8-12 |
| Number of Channels | — | 1 channel |
| Output Current Capability | — | [DATA_NEEDED: output current rating] |
| Input Offset Drift | — | [DATA_NEEDED: input offset voltage drift] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |