ADC08831IMX vs ADC08832IM Comparison

Detailed side-by-side comparison of ADC08831IMX by Texas Instruments and ADC08832IM by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
ADC08831IMX ADC08831IMX - 8-Bit Serial ADC 1-Ch 8-SOIC | Texas Instruments

ADC08831IMX - 8-Bit Serial ADC 1-Ch 8-SOIC | Texas Instruments

ADC08831IMX ✓ Active

Specification Comparison

Parameter ADC08831IMX ADC08832IM
Brand Texas Instruments Texas Instruments
Category ADC/DAC ADC/DAC
Lifecycle Status Active NRND
Stock Status In Stock In Stock
Unit Price (USD) $0.78 $1.08
Manufacturer Texas Instruments —
Part Number ADC08831IMX —
Resolution 8 bit 8 bits
Number of Input Channels 1 (2:1 MUX on chip) —
Converter Architecture SAR (Successive Approximation Register) —
Sampling Rate (Max) 181 kSPS —
Data Interface MICROWIRE-compatible 3-wire serial (CS, SCLK, DOUT) 3-wire serial (CS, CLK, DO) - SPI/QSPI/MICROWIRE compatible
Analog Supply Voltage 4.5 V to 6.5 V —
Digital Supply Voltage 4.5 V to 6.5 V —
Input Voltage Range 0 V to VCC (with internal input clamps) —
Package / Case 8-SOIC (0.154 in / 3.90 mm width) —
Mounting Type Surface Mount Surface Mount
Operating Temperature -40 C to +85 C —
Sample-and-Hold On-chip —
MSL Level 1 (per JEDEC J-STD-020) —
RoHS Status Compliant [DATA_NEEDED: per TI product page - IM suffix typically non-RoHS; IM/NOPB is Pb-free]
Architecture — Successive Approximation (SAR)
Number of Inputs — 2 (configurable, single-ended/differential)
Conversion Time Max — 4 us (fC = 2 MHz)
Supply Voltage — [DATA_NEEDED: nominal VCC range]
Analog Input Range — GND to VCC
Input Type — Single-ended or differential with MUX
Sample and Hold — Internal, on-chip
Clock Frequency Max — 2 MHz (fC)
Power Dissipation — 8.5 mW (typical)
Digital I/O Logic Levels — TTL/CMOS compatible
Operating Temperature Range — -40 C to +85 C
Package — 8-SOIC (0.150 inch, SO Wide)
Pin Count — 8
Reference / Transfer Ratio — 1 LSB = VREF/256 (ratiometric to VCC)

Datasheets & Resources

Browse All Products Create BOM Request Quote