ADC08831IMX vs ADC08832IM 比較
詳細な並列比較: ADC08831IMX メーカー: Texas Instruments および ADC08832IM メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | ADC08831IMX | ADC08832IM |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | ADC/DAC | ADC/DAC |
| ライフサイクル状態 | 有効 | NRND |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $0.78 | $1.08 |
| Manufacturer | Texas Instruments | — |
| Part Number | ADC08831IMX | — |
| 分解能 | 8 bit | 8 bits |
| Number of Input Channels | 1 (2:1 MUX on chip) | — |
| Converter Architecture | SAR (Successive Approximation Register) | — |
| Sampling Rate (Max) | 181 kSPS | — |
| Data Interface | MICROWIRE-compatible 3-wire serial (CS, SCLK, DOUT) | 3-wire serial (CS, CLK, DO) - SPI/QSPI/MICROWIRE compatible |
| Analog Supply Voltage | 4.5 V to 6.5 V | — |
| Digital Supply Voltage | 4.5 V to 6.5 V | — |
| 入力電圧範囲 | 0 V to VCC (with internal input clamps) | — |
| パッケージ / ケース | 8-SOIC (0.154 in / 3.90 mm width) | — |
| 実装タイプ | Surface Mount | Surface Mount |
| 動作温度 | -40 C to +85 C | — |
| Sample-and-Hold | On-chip | — |
| MSLレベル | 1 (per JEDEC J-STD-020) | — |
| RoHS ステータス | Compliant | [DATA_NEEDED: per TI product page - IM suffix typically non-RoHS; IM/NOPB is Pb-free] |
| Architecture | — | Successive Approximation (SAR) |
| Number of Inputs | — | 2 (configurable, single-ended/differential) |
| Conversion Time Max | — | 4 us (fC = 2 MHz) |
| 電源電圧 | — | [DATA_NEEDED: nominal VCC range] |
| Analog Input Range | — | GND to VCC |
| Input Type | — | Single-ended or differential with MUX |
| Sample and Hold | — | Internal, on-chip |
| Clock Frequency Max | — | 2 MHz (fC) |
| Power Dissipation | — | 8.5 mW (typical) |
| Digital I/O Logic Levels | — | TTL/CMOS compatible |
| 動作温度範囲 | — | -40 C to +85 C |
| パッケージ | — | 8-SOIC (0.150 inch, SO Wide) |
| ピン数 | — | 8 |
| Reference / Transfer Ratio | — | 1 LSB = VREF/256 (ratiometric to VCC) |