ADM203JNZ vs ADM202JNZ Comparison

Detailed side-by-side comparison of ADM203JNZ by Analog Devices and ADM202JNZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Analog Devices
ADM203JNZ ADM203JNZ - Dual 5V RS-232 Transceiver | Analog Devices

ADM203JNZ - Dual 5V RS-232 Transceiver | Analog Devices

ADM203JNZ ✓ Active
Analog Devices
ADM202JNZ ADM202JNZ - Dual RS-232 Transceiver | Analog Devices

ADM202JNZ - Dual RS-232 Transceiver | Analog Devices

ADM202JNZ ✓ Active

Specification Comparison

Parameter ADM203JNZ ADM202JNZ
Brand Analog Devices Analog Devices
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type Dual RS-232 transmitter/receiver interface IC —
Number of Driver Channels 2 channels —
Number of Receiver Channels 2 channels —
Supply Voltage +5 V —
Maximum Data Rate 120 kB/s —
Charge-Pump Capacitor Value 0.1 µF 0.1 µF
Logic Technology CMOS —
Interface Standard EIA-232-E and V.28 TIA/EIA-232-E and V.28
Package 20-pin PDIP-N 16-pin PDIP, 0.300 inch body width, 7.62 mm lead pitch
Mounting Type Through-hole Through-hole
Driver Slew Rate Fast slew rate; numerical value not provided —
Driver Output Current High-drive-current operation; numerical value not provided —
Maximum Cable Length [DATA_NEEDED: maximum cable length] —
Operating Temperature Range [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Supply Current [DATA_NEEDED: supply current] 2.5 mA
Input and Output Logic Levels [DATA_NEEDED: input and output logic voltage levels] —
ESD Protection [DATA_NEEDED: ESD protection rating] —
RoHS Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Number of Drivers — 2
Number of Receivers — 2
Transceiver Configuration — 2 drivers and 2 receivers
Maximum Transmission Rate — 120 kbit/s
Supply Voltage Range — 4.5 V to 5.5 V
Nominal Supply Voltage — 5 V
RS-232 Output Level — Approximately ±10 V
Receiver Input Voltage Tolerance — ±30 V
Technology — BiCMOS
Shipping Package — Tube
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Datasheets & Resources

Browse All Products Create BOM Request Quote