ADM203JNZ vs ADM202JNZ Comparaison

Comparaison détaillée côte à côte de ADM203JNZ par Analog Devices et ADM202JNZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
ADM203JNZ ADM203JNZ - Dual 5V RS-232 Transceiver | Analog Devices

ADM203JNZ - Dual 5V RS-232 Transceiver | Analog Devices

ADM203JNZ ✓ Actif
Analog Devices
ADM202JNZ ADM202JNZ - Dual RS-232 Transceiver | Analog Devices

ADM202JNZ - Dual RS-232 Transceiver | Analog Devices

ADM202JNZ ✓ Actif

Comparaison des spécifications

Paramètre ADM203JNZ ADM202JNZ
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type Dual RS-232 transmitter/receiver interface IC —
Number of Driver Channels 2 channels —
Number of Receiver Channels 2 channels —
Tension d'alimentation +5 V —
Maximum Data Rate 120 kB/s —
Charge-Pump Capacitor Value 0.1 µF 0.1 µF
Logic Technology CMOS —
Interface Standard EIA-232-E and V.28 TIA/EIA-232-E and V.28
Boîtier 20-pin PDIP-N 16-pin PDIP, 0.300 inch body width, 7.62 mm lead pitch
Type de montage Through-hole Through-hole
Driver Slew Rate Fast slew rate; numerical value not provided —
Driver Output Current High-drive-current operation; numerical value not provided —
Maximum Cable Length [DATA_NEEDED: maximum cable length] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Courant d'alimentation [DATA_NEEDED: supply current] 2.5 mA
Input and Output Logic Levels [DATA_NEEDED: input and output logic voltage levels] —
ESD Protection [DATA_NEEDED: ESD protection rating] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Number of Drivers — 2
Number of Receivers — 2
Transceiver Configuration — 2 drivers and 2 receivers
Maximum Transmission Rate — 120 kbit/s
Supply Voltage Range — 4.5 V to 5.5 V
Nominal Supply Voltage — 5 V
RS-232 Output Level — Approximately ±10 V
Receiver Input Voltage Tolerance — ±30 V
Technology — BiCMOS
Shipping Package — Tube
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis