ADM232AANZ vs LT1080CJ Comparison
Detailed side-by-side comparison of ADM232AANZ by Analog Devices and LT1080CJ by Linear Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Linear Technology
LT1080CJ - 5V RS232 Dual Driver/Receiver, 18-CERDIP | Linear Technology
LT1080CJ ✓ ActiveSpecification Comparison
| Parameter | ADM232AANZ | LT1080CJ |
|---|---|---|
| Brand | Analog Devices | Linear Technology |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual RS-232 line driver and receiver transceiver | — |
| Maximum Transmission Rate | 200 kB/s | — |
| Supply Voltage | 5 V | 5 V (single supply) |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Charge-Pump Capacitor Value | 0.1 µF | — |
| On-Board DC-DC Converter | Present | — |
| RS-232 Output Swing | Approximately ±9 V with a 5 V supply | — |
| Receiver Input Levels | Up to ±30 V | — |
| Interface Compliance | EIA-232-E and V.28 | — |
| Package | 16-lead DIP, 0.300 inch (7.62 mm) pitch | 18-pin CERDIP (J) - through-hole |
| Mounting Type | Through-hole | Through-Hole |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | 0°C to +70°C (commercial grade) |
| Supply Current | [DATA_NEEDED: supply current] | — |
| Driver Output Voltage | [DATA_NEEDED: driver output voltage] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status - CERDIP package typically not RoHS] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Standard Packaging Quantity | [DATA_NEEDED: standard packaging quantity] | — |
| Function | — | Transceiver |
| Protocol | — | RS232 |
| Number of Drivers/Receivers | — | 2/2 |
| Data Rate | — | 120 kBaud (minimum, superior to CMOS) |
| Output Voltage Swing (RS232) | — | ±5 V to ±15 V typical (from charge pump) |
| Driver Output Overvoltage Tolerance | — | ±30 V (without damage) |
| Receiver Input Range | — | ±30 V (typical) |
| Charge Pump Capacitors | — | 4 x 1 µF (external) |
| Shutdown Mode | — | Yes (drivers go to high-impedance) |
| Latchup Immunity | — | Absolute (no latchup under any condition) |
| Number of Terminals | — | 18 |
| Terminal Form | — | Through-Hole |
| Package Code | — | DIP |