ADM232AANZ vs LT1080CJ तुलना

विस्तृत दोनों ओर की तुलना ADM232AANZ द्वारा Analog Devices और LT1080CJ द्वारा Linear Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM232AANZ ADM232AANZ - 200 kB/s Dual RS-232 Transceiver | Analog Devices

ADM232AANZ - 200 kB/s Dual RS-232 Transceiver | Analog Devices

ADM232AANZ ✓ सक्रिय
Linear Technology
LT1080CJ LT1080CJ - 5V RS232 Dual Driver/Receiver, 18-CERDIP | Linear Technology

LT1080CJ - 5V RS232 Dual Driver/Receiver, 18-CERDIP | Linear Technology

LT1080CJ ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM232AANZ LT1080CJ
ब्रांड Analog Devices Linear Technology
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Dual RS-232 line driver and receiver transceiver —
Maximum Transmission Rate 200 kB/s —
सप्लाई वोल्टेज 5 V 5 V (single supply)
Number of Drivers 2 —
Number of Receivers 2 —
Charge-Pump Capacitor Value 0.1 µF —
On-Board DC-DC Converter Present —
RS-232 Output Swing Approximately ±9 V with a 5 V supply —
Receiver Input Levels Up to ±30 V —
Interface Compliance EIA-232-E and V.28 —
पैकेज 16-lead DIP, 0.300 inch (7.62 mm) pitch 18-pin CERDIP (J) - through-hole
माउंटिंग प्रकार Through-hole Through-Hole
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] 0°C to +70°C (commercial grade)
सप्लाई करंट [DATA_NEEDED: supply current] —
Driver Output Voltage [DATA_NEEDED: driver output voltage] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status - CERDIP package typically not RoHS]
REACH Status [DATA_NEEDED: REACH status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Standard Packaging Quantity [DATA_NEEDED: standard packaging quantity] —
फ़ंक्शन — Transceiver
Protocol — RS232
Number of Drivers/Receivers — 2/2
डेटा दर — 120 kBaud (minimum, superior to CMOS)
Output Voltage Swing (RS232) — ±5 V to ±15 V typical (from charge pump)
Driver Output Overvoltage Tolerance — ±30 V (without damage)
Receiver Input Range — ±30 V (typical)
Charge Pump Capacitors — 4 x 1 µF (external)
Shutdown Mode — Yes (drivers go to high-impedance)
Latchup Immunity — Absolute (no latchup under any condition)
Number of Terminals — 18
Terminal Form — Through-Hole
Package Code — DIP

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध