ADM232LAR vs MAX232ECDWR Comparison
Detailed side-by-side comparison of ADM232LAR by Analog Devices and MAX232ECDWR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
MAX232ECDWR - Dual 250kbps RS-232 Transceiver | Texas Instruments
MAX232ECDWR ✓ ActiveSpecification Comparison
| Parameter | ADM232LAR | MAX232ECDWR |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Supply Voltage | 5 V (single supply) | — |
| Transceiver Configuration | 2 drivers / 2 receivers (2/2) | — |
| Data Rate | 120 kB/s | — |
| Interface Standard Compliance | EIA-232-E and V.28 | — |
| Output Swing | 9 V with 5 V supply | — |
| On-Board DC-DC Converters | Yes | — |
| Required External Capacitors | 1 uF | — |
| Shutdown | Low power shutdown mode | — |
| Receiver Supply Current in Shutdown | 1 uA (receivers active in shutdown) | — |
| Receiver Input Voltage Tolerance | 30 V | — |
| Package | 16-lead SOIC (SOIC-16) | 16-pin SOIC (DW), 0.295 inch / 7.50 mm width |
| Number of Pins | 16 | — |
| Mounting Type | Surface Mount | Surface mount |
| Technology | CMOS | — |
| Automotive Qualification (AEC-Q100) | not_applicable | — |
| Supply Current | [DATA_NEEDED: typical and maximum supply current] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | [DATA_NEEDED: driver output current] | [DATA_NEEDED: driver output current] |
| RoHS Status | [DATA_NEEDED: RoHS status for ADM232LAR] | — |
| REACH Status | [DATA_NEEDED: REACH status for ADM232LAR] | — |
| Product Type | — | Dual RS-232 driver/receiver |
| Number of Transmitters | — | 2 |
| Number of Receivers | — | 2 |
| Maximum Data Rate | — | 250 kbps |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Supply Type | — | Single 5 V supply |
| ESD Protection Standard | — | IEC 61000-4-2 |
| Transmitter Output Type | — | RS-232 line driver |
| Receiver Output Type | — | TTL/CMOS logic-level receiver |
| Charge-Pump Architecture | — | Capacitive voltage generator with external capacitors |
| Number of External Charge-Pump Capacitors | — | 4 |
| Bypass Capacitor Connection | — | 1 external capacitor pin |
| Input Logic Levels | — | [DATA_NEEDED: receiver input logic thresholds] |
| RS-232 Common-Mode Voltage Range | — | [DATA_NEEDED: RS-232 common-mode voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |