ADM232LAR vs MAX232ECDWR Vergleich
Detaillierter Direktvergleich von ADM232LAR von Analog Devices und MAX232ECDWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MAX232ECDWR - Dual 250kbps RS-232 Transceiver | Texas Instruments
MAX232ECDWR ✓ AktivSpezifikationsvergleich
| Parameter | ADM232LAR | MAX232ECDWR |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Versorgungsspannung | 5 V (single supply) | — |
| Transceiver Configuration | 2 drivers / 2 receivers (2/2) | — |
| Datenrate | 120 kB/s | — |
| Interface Standard Compliance | EIA-232-E and V.28 | — |
| Output Swing | 9 V with 5 V supply | — |
| On-Board DC-DC Converters | Yes | — |
| Required External Capacitors | 1 uF | — |
| Shutdown | Low power shutdown mode | — |
| Receiver Supply Current in Shutdown | 1 uA (receivers active in shutdown) | — |
| Receiver Input Voltage Tolerance | 30 V | — |
| Gehäuse | 16-lead SOIC (SOIC-16) | 16-pin SOIC (DW), 0.295 inch / 7.50 mm width |
| Anzahl der Pins | 16 | — |
| Montageart | Surface Mount | Surface mount |
| Technology | CMOS | — |
| Automotive Qualification (AEC-Q100) | not_applicable | — |
| Versorgungsstrom | [DATA_NEEDED: typical and maximum supply current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | [DATA_NEEDED: driver output current] | [DATA_NEEDED: driver output current] |
| RoHS-Status | [DATA_NEEDED: RoHS status for ADM232LAR] | — |
| REACH Status | [DATA_NEEDED: REACH status for ADM232LAR] | — |
| Product Type | — | Dual RS-232 driver/receiver |
| Number of Transmitters | — | 2 |
| Number of Receivers | — | 2 |
| Maximum Data Rate | — | 250 kbps |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Supply Type | — | Single 5 V supply |
| ESD Protection Standard | — | IEC 61000-4-2 |
| Transmitter Output Type | — | RS-232 line driver |
| Receiver Output Type | — | TTL/CMOS logic-level receiver |
| Charge-Pump Architecture | — | Capacitive voltage generator with external capacitors |
| Number of External Charge-Pump Capacitors | — | 4 |
| Bypass Capacitor Connection | — | 1 external capacitor pin |
| Input Logic Levels | — | [DATA_NEEDED: receiver input logic thresholds] |
| RS-232 Common-Mode Voltage Range | — | [DATA_NEEDED: RS-232 common-mode voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |