ADM2484EBRWZ vs ISO1450BDWR Comparison
Detailed side-by-side comparison of ADM2484EBRWZ by Analog Devices and ISO1450BDWR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ ActiveSpecification Comparison
| Parameter | ADM2484EBRWZ | ISO1450BDWR |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Category | RS-485/RS-422 | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $3.10 | $2.95 |
| Type | Isolated RS-485/RS-422 Transceiver | — |
| Number of Channels | 3 | — |
| Isolation Voltage | 5000 Vrms | — |
| Data Rate | 500 kbps | — |
| CMTI | 25 kV/µs | — |
| ESD Protection | ±15 kV | — |
| Supply Voltage (Logic) | 3.3 V or 5 V | — |
| Supply Voltage (Bus) | 5 V | — |
| Duplex | Half/Full | Half |
| Package | 16-SOIC (0.295", 7.50mm Width) | SOIC-16 wide-body (DW), 16 pins |
| Operating Temperature | -40°C to +85°C | -40C to +125C |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant | Compliant |
| Number of Drivers/Receivers | 1/1 | — |
| Propagation Delay | [DATA_NEEDED: Propagation delay] | — |
| Function | — | Isolated half-duplex RS-485 / RS-422 transceiver |
| Data Rate (max) | — | 50 Mbps |
| Isolation Voltage (rms) | — | 5 kVrms (reinforced) |
| Number of Drivers / Receivers | — | 1/1 |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis voltage] |
| Supply Voltage VCC1 (logic side) | — | 3 V to 5.5 V |
| Supply Voltage VCC2 (bus side) | — | Internally generated by isolated DC-DC |
| Bus Pin ESD (IEC 61000-4-2) | — | ±16 kV (air / contact, per datasheet) |
| Bus Pin ESD (HBM) | — | ±4 kV |
| IEC 61000-4-4 EFT Immunity | — | ±4 kV |
| Surge Immunity | — | [DATA_NEEDED: IEC 61000-4-5 surge rating] |
| Unit Load | — | 1/8 (up to 256 nodes on bus) |
| Common-Mode Range | — | Wide common-mode bus voltage range (per datasheet) |
| Thermal Shutdown | — | Yes |
| Current Limiting | — | Yes |
| Low-Power Standby | — | Yes |
| MSL Level | — | 3 (per JEDEC J-STD-020) |
| Compliance Standards | — | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 |