ADM2484EBRWZ vs ISO1450BDWR Comparaison
Comparaison détaillée côte à côte de ADM2484EBRWZ par Analog Devices et ISO1450BDWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ ActifComparaison des spécifications
| Paramètre | ADM2484EBRWZ | ISO1450BDWR |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | RS-485/RS-422 | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,10 | $2,95 |
| Type | Isolated RS-485/RS-422 Transceiver | — |
| Number of Channels | 3 | — |
| Isolation Voltage | 5000 Vrms | — |
| Débit de données | 500 kbps | — |
| CMTI | 25 kV/µs | — |
| ESD Protection | ±15 kV | — |
| Supply Voltage (Logic) | 3.3 V or 5 V | — |
| Supply Voltage (Bus) | 5 V | — |
| Duplex | Half/Full | Half |
| Boîtier | 16-SOIC (0.295", 7.50mm Width) | SOIC-16 wide-body (DW), 16 pins |
| Température de fonctionnement | -40°C to +85°C | -40C to +125C |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Number of Drivers/Receivers | 1/1 | — |
| Propagation Delay | [DATA_NEEDED: Propagation delay] | — |
| Fonction | — | Isolated half-duplex RS-485 / RS-422 transceiver |
| Data Rate (max) | — | 50 Mbps |
| Isolation Voltage (rms) | — | 5 kVrms (reinforced) |
| Number of Drivers / Receivers | — | 1/1 |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis voltage] |
| Supply Voltage VCC1 (logic side) | — | 3 V to 5.5 V |
| Supply Voltage VCC2 (bus side) | — | Internally generated by isolated DC-DC |
| Bus Pin ESD (IEC 61000-4-2) | — | ±16 kV (air / contact, per datasheet) |
| Bus Pin ESD (HBM) | — | ±4 kV |
| IEC 61000-4-4 EFT Immunity | — | ±4 kV |
| Surge Immunity | — | [DATA_NEEDED: IEC 61000-4-5 surge rating] |
| Unit Load | — | 1/8 (up to 256 nodes on bus) |
| Common-Mode Range | — | Wide common-mode bus voltage range (per datasheet) |
| Arrêt thermique | — | Yes |
| Current Limiting | — | Yes |
| Low-Power Standby | — | Yes |
| Niveau MSL | — | 3 (per JEDEC J-STD-020) |
| Compliance Standards | — | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 |