AM26LV32IDR vs DS90C032TM Comparison

Detailed side-by-side comparison of AM26LV32IDR by Texas Instruments and DS90C032TM by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
AM26LV32IDR AM26LV32IDR - 32MHz 3.3V Quad RS-422 Receiver | TI

AM26LV32IDR - 32MHz 3.3V Quad RS-422 Receiver | TI

AM26LV32IDR ✓ Active
Texas Instruments
DS90C032TM DS90C032TM - 4-Channel LVDS Receiver | Texas Instruments

DS90C032TM - 4-Channel LVDS Receiver | Texas Instruments

DS90C032TM ✓ Active

Specification Comparison

Parameter AM26LV32IDR DS90C032TM
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Device Type Quadruple differential line receiver —
Interface Standard TIA/EIA-422-B and ITU Recommendation V.11 receiver —
Supply Voltage 3.0 V to 3.6 V 5 V
Nominal Supply Voltage 3.3 V —
Number of Receivers 4 —
Maximum Switching Rate 32 MHz —
Architecture BiCMOS —
Output Type 3-state differential receiver outputs —
Enable Control Common enable for all four receivers —
Power Dissipation 27 mW Ultra-low power dissipation
Package 16-pin SOIC, plastic MS-012AC 16-pin SOIC
Mounting Type Surface mount Surface mount
Operating Temperature Range 0 C to 70 C for AM26LV32ID [DATA_NEEDED: operating temperature range]
Terminal Count 16 —
Technology BiCMOS LVDS
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Input Differential Voltage [DATA_NEEDED: input differential voltage range] —
Output High-Level Voltage [DATA_NEEDED: output high-level voltage] —
Output Low-Level Voltage [DATA_NEEDED: output low-level voltage] —
Input Current [DATA_NEEDED: input current] —
Enable Pin Levels [DATA_NEEDED: enable input thresholds] —
ESD Rating [DATA_NEEDED: ESD rating] —
RoHS Status Compliant [DATA_NEEDED: RoHS status]
MSL Level 1, 260 C unlimited —
Receiver Type — LVDS quad CMOS differential line receiver
Number of Receiver Channels — 4 channels
Process Technology — CMOS
Maximum Supported Data Rate — In excess of 155.5 Mbps
Maximum Clock Frequency — 77.7 MHz
Differential Input Signal Voltage — 350 mV
Output Level — CMOS, TTL-compatible
Output Control — TRI-STATE
Supply Current — [DATA_NEEDED: supply current]
Input Termination — [DATA_NEEDED: differential input termination]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Status — [DATA_NEEDED: AEC-Q100 qualification status]

Datasheets & Resources

Browse All Products Create BOM Request Quote